POST YOUR AMD XP-M O/Cs here!

[ati_azn]

title. mines in my sig, around 2.6ghz 1.7v whats yours?

[JackieChanIsGOD]

*sig*

:)

[rogue_jedi]

2400+ 35W at... /checks speed/ 2.34ghz. not bad considering my motherboard sucks and had water spilled on it (just a little but still) at one point.

i might buy a better mobo as a send off for the aXP platform for me... but i wanna save my money for dual opteron+sli;) i might have to buy a (relatively) cheap dfi lanparty or so to tide me over, though. that, and a new video card:rolleyes:
http://www.mentallyretired.com/h/index.cfm/u_rogue_jedi (http://www.mentallyretired.com/hard/index.cfm?fa=stats.user&u=rogue_jedi)

[Spetsnaz Op]

Well I have my 2500+ mobile running at 200x11 ~2200MHz (2205 according to WCPUID)

1.625volts. I could push it further but I prefer not to have overclocked ram. Haven't tried to push the multi up more but I run this computer everyday for many many hours and longevity is paramount :)

[Deadlierchair]

A friend's 2400+ on a Shuttle mobo doing 2200 mhz at 1.6 v no problem. Didn't push it further because he's not that savvy into OCing and didn't want him to have to deal with it.

[IceBawx]

I have my 35W 2400+ at 2.2ghz, 1.47v most the time, runs in the 20's *c on air, but I did figure out my max on air :)

http://images.dr3vil.com/uploads/last1.JPG

ran 44*c idle at that, and high 60's load, with a swiftech MCX-462-V, AQYHA stepping,

[distr0]

I have my 35W 2400+ at 2.2ghz, 1.47v most the time, runs in the 20's *c on air, but I did figure out my max on air :)

http://images.dr3vil.com/uploads/last1.JPG

ran 44*c idle at that, and high 60's load, with a swiftech MCX-462-V, AQYHA stepping,

why would you not run at that ll the time? is it not stable?

[IceBawx]

Stability is iffy on that, and im a temperature freak :p , it will be around there once my water gets here from Snt-Systems, and i didnt really have much time to test that, as when i went for 2.8ghz...my psu died :rolleyes:

[Dojo | Warlord]

http://www.gamers-syndicate.net/CPU-Z_12-19-04_CPU1.jpg

[El Nacho]

http://elnacho.homeip.net/pics/other/oc.jpg

Only pic i can find. it was 35w 2400+ running @ 13 x 200 on a a7n8x deluxe (ver 2.0) with 2 x 512 hyper x pc4000. Cooled by a slk-800.

[SmokeRngs]

Check my sig for mine.

http://www.mentallyretired.com/h/index.cfm/u_SmokeRngs (http://www.hardfolding.com)

[Clint]

mobile 2600+nf7s v2.0 1.7vcore
http://www.clint.mwhq.net/20701.jpg

[echow87]

2600+ @ 2800mhz: 200x14 @ 2.0v

I will be feeding the cpu 2.1v+ to try and hit 3ghz :)

[Spetsnaz Op]

hmmm maybe I will push my multi a little more after all...can't have 2400+'s showing me up :D

[distr0]

2600+ @ 2800mhz: 200x14 @ 2.0v

I will be feeding the cpu 2.1v+ to try and hit 3ghz :)

what kind of cooling do you have for 2.1v?

[ati_azn]

wow. my xp-m 2600+ runs at 2.56ghz now (found out it wasnt stable if i dont set the voltage to 1.7v and if i do he desk will be vibrating and the case will sound like a 747 taking off) , 1.675v, 150fsb, 300bus speed. ~40 idel with my blower set at a vibrating(loud) ~4000rpm speed, and ~61l load. how the hell can you guys get up to over 1.7v, 2.6+ghz?!? i think its because of my crappy ram

[ryuji]

i had a 2600 xp mobile that i sold that would do 2.6 ghtz at 1.725v.. passed it up for the p4
did it all on air cooling, slk-800 with enermax turned down to point it was quiet... got temps of about 80F idle and 105 F load the p4 i got now full load has trouble heating my room even close to as much as my athlon did just idling :rolleyes:

havent measured it since the p4 but my computer would pull almost 2 amps of power; thats 240 watts, there is consiterably less heat comign out of the power supply so i imagine its lightly loaded now

[ati_azn]

i think i need some as5. no name silver compoud i found at some stupid store and i paid 3 buck for a tiny tiny tube. what a rip off. anyways im running i think. 150x18 LOL yeah i know. think i should step up the FSB and lower the multiplyer?

[ryuji]

changing multiplier on athlons dont do too much for overall preformance.. more fsb does a lot more imo when people change multipliers they usualy want to turn it down not up

[ciscokid454]

I had three 2500+M's running watercooled in my nf7-s 2.0 @ 12.5x225 @ 1.825v.
I don't have any screen caps, but i tested it with knoppix and xp.

[heero884]

2.7GHz (13.5x200) 2600+ axpm (0401?) @1.85volts cooled by slk800u with 80mm tornado (7volts)
nf7-s rev2.0 with tt northbridge hsf and tt southbridge heatsink and mofset heatsinks
2x 512MB patriot LL (2-3-2-5)
r9600xt aiw (580core/370memory)

all powered by a 300watt seasonic supertornado (prime95 stable for a week =p)

temps (according to mbm5)
idle:39
load:45

i reapplied the AS ceramique at least a dozen times before settling on what i currently have (tried varying thickness of thermal paste). also i used the credit card method fyi..

[nylint]

http://www.l33tsauce.net/images/cpu.jpg

Don't know why it says 1.68v, i'm only pushing 1.625 to the chip.
Not a great OC, but not bad considering my cooling isn't the best.
35w 2400+, AQYHA step.

[qb4ever]

http://www.tylarmiles.ath.cx/xp3700.jpg

Hit a brick wall there, won't do 2.6 stable enough to run 3dmark01 even with 1.95v core :(, Chip is IQYHA stepping

Btw, vid card does 500mhz core speed without artifacts :D

Wantin more power already :D

[ati_azn]

ok i upped the FSB to 180, bus speed is now 360, muiltiplier is now 14, voltage is now 1.65 (lowered from 1.7 since the Tt couldnt standup to it). think i shold up the FSB a lil more and drop the multiplier?

[distr0]

ok i upped the FSB to 180, bus speed is now 360, muiltiplier is now 14, voltage is now 1.65 (lowered from 1.7 since the Tt couldnt standup to it). think i shold up the FSB a lil more and drop the multiplier?

you have pc3200 ram and you're running at 180fsb? why would you underclock so much? i would START at 200 and work up from there

[CrimandEvil]

With crappy air cooling: 2405.5
vcore: 1.65
Multi: 12
FSB: 200.5
Temps: low 40s to low 50s at load some times
Stable as a mofo and I have watercooling gear on the way (finally).

[oldbrave]

setup is in the Sig. and thats the way it stays 24-7-365, it's OEM stable ! :)

[ShimmyT]

XP-M 2500+ with 200FSB 11 multi. I will get a screen shot when I get back home. It's running at a 1.55v now. If I try to push any more power to it, it goes unstable.

[ati_azn]

you have pc3200 ram and you're running at 180fsb? why would you underclock so much? i would START at 200 and work up from there
my albatron k-18d got a 400mhz nforce 2 ultra fsb. i raised it up to 188 now and the bus speed is ~376, 13.5 multiplier and the core speed is up to 2.537 now. ill try putting the muili down to 12.5 and raise the fsb up to 200. im still running the voltage at 1.65 now though

[CRXican]

Hmmm, looks like I should invest in some faster ram DDR433 perhaps or DDR500? I have a XP-M 2500+ running at 11X200 for 2.2Ghz at 1.6 volts. I have a Shuttle so it's difficult to keep temps down. With the cooler weather in So Cal it will sit at 44-46C at full load while folding. During the summer however it excedes 50C

[ati_azn]

Hmmm, looks like I should invest in some faster ram DDR433 perhaps or DDR500? I have a XP-M 2500+ running at 11X200 for 2.2Ghz at 1.6 volts. I have a Shuttle so it's difficult to keep temps down. With the cooler weather in So Cal it will sit at 44-46C at full load while folding. During the summer however it excedes 50C
thats not bad compared to my xp-m2600+ running at ~2.56ghz with 1.65volt, thats going at 59 full load and in the low 40s idel. and i live in new york city too. ithink i need some as5

[ALL4AMD]

Hit a brick wall there, won't do 2.6 stable enough to run 3dmark01 even with 1.95v core :(, Chip is IQYHA stepping

Btw, vid card does 500mhz core speed without artifacts :D

Wantin more power already :Dyeah same for me. c sig same stepping www.all4amd.netfirms.com (http://www.all4amd.netfirms.com/) pics here. need to take a more recent pic as i have changed the nb and sb sinks and vid card

[ati_azn]

hey guys. suddenly my XP-M was underclocked to 800mhztoday when i turned my system on. so then i restarted and reset the fsb up to 185mhz , 13.5 multi and 1.675v. i saved and exited then i went to play bf1942. somehow it crashed and i got a BLUE SCREEN! im like WTF!. so i turned my blower al the way up to 4300rpm which should be more than enough cooling. so i tried it again. AGAIN it crashed. i went back tot he BIOs underclocked everything. 170fsb, 13 multi but same voltage since it should be ok. again it happened. wTF IS GOING ON?!
edit: oh yeah and i reset the CMOS everytime it crashed and then oc in the bios again.

[Ballz2TheWallz]

i had mine at 240x12.5=3000mhz(5100+ according to uamdtool) it was a 2600+ mobile with SP-97 cooler and vantec tornado 6 case fans...sold it on ebay for a good price...lets just say a man has to have his priorities

oh yeah it had a air conditionar duct running to the 2x 80mm intake fans...idle was 38C load was 49C all on an abit AN7 with BH-5 :)

[SidewinderX]

http://www.dpetkofsky.com/cpuz.jpg

I might push it more later tonight...
2400-M
43C idle, ~50C prime95 load...

[ryuji]

i had mine at 240x12.5=3000mhz(5100+ according to uamdtool) it was a 2600+ mobile with SP-97 cooler and vantec tornado 6 case fans...sold it on ebay for a good price...lets just say a man has to have his priorities

oh yeah it had a air conditionar duct running to the 2x 80mm intake fans...idle was 38C load was 49C all on an abit AN7 with BH-5 :)
you passed that up for what!?! better be a a64 fx cux nothings gonna even touch that lol

[Dark_Orison]

wow, with what voltage did you achieve that?

[ati_azn]

hey guys. suddenly my XP-M was underclocked to 800mhztoday when i turned my system on. so then i restarted and reset the fsb up to 185mhz , 13.5 multi and 1.675v. i saved and exited then i went to play bf1942. somehow it crashed and i got a BLUE SCREEN! im like WTF!. so i turned my blower al the way up to 4300rpm which should be more than enough cooling. so i tried it again. AGAIN it crashed. i went back tot he BIOs underclocked everything. 170fsb, 13 multi but same voltage since it should be ok. again it happened. wTF IS GOING ON?!
edit: oh yeah and i reset the CMOS everytime it crashed and then oc in the bios again.
bump this! im running at 1.5v and 800mhz now! damn its slowwww!

[mavalpha]

I know you asked about Mobiles, but my locked desktop 2500+ used to run 11x221=2431MHz@1.825V on a DFI LanParty NFII Ultra B. Only downside is that the replacement is absolute crap, and is unstable above a 213FSB.

[ryuji]

bump this! im running at 1.5v and 800mhz now! damn its slowwww!
set the multiplier on it ... lol its a mobile.. it has no set multiplier... motherboard doesnt know what ot use
so it does 6...100 mhtz fsb

[cgrant26]

2600+M @2.5 gigs on water.

[BitchBreaker]

Hey Ice i see your still the king of the AXP-M oc..now do i get to try??? heres my..uhh..Aintel E core with its 900mhz ocing bad self all on air! http://images.dr3vil.com/uploads/oc5.JPG

Ohh and i also got 12k cpu marks :)

[heero884]

impressive overclock ummmm ...breaker =) what kind of heatsink/fan are you using? you should try the Intel Top 10 SuperPi 32M challenge, your p4 is clocked higher than the 2nd fastest p4 there, so it should put out a pretty impressive time, care to try? =p

http://www.hardforum.com/showthread.php?t=840858&page=1&pp=20

[BitchBreaker]

impressive overclock ummmm ...breaker =) what kind of heatsink/fan are you using? you should try the Intel Top 10 SuperPi 32M challenge, your p4 is clocked higher than the 2nd fastest p4 there, so it should put out a pretty impressive time, care to try? =p

http://www.hardforum.com/showthread.php?t=840858&page=1&pp=20


Stock Intel pressy hsf moded with a 80mm tornado 7volted, ill try that super pi test later...big number's dont really impress me..but good gaming allways makes me happy :)

[RollerX]

http://1stclasspcs.com/uploaded/XP-M2400.JPG

[ati_azn]

set the multiplier on it ... lol its a mobile.. it has no set multiplier... motherboard doesnt know what ot use
so it does 6...100 mhtz fsb
dude. its hardly even stable now! im running it like 2.1ghz with 160something fbs and .1675 v with 4300+rpms blowing on it! i was plaing freedom fighter earlier for about an hour then all of a sudden the stupid thing froze up on me! wtf is going on! it was ok a few days ago and 3 days ago it justunderclocked all of a sudden and it wont even get stable!

[Diesel187]

AMD Athlon XP-M 2600+ @ 2.4GHz 1.7v
200x12 on air: Thermaltake Silent Boost

[BitchBreaker]

impressive overclock ummmm ...breaker =) what kind of heatsink/fan are you using? you should try the Intel Top 10 SuperPi 32M challenge, your p4 is clocked higher than the 2nd fastest p4 there, so it should put out a pretty impressive time, care to try? =p

http://www.hardforum.com/showthread.php?t=840858&page=1&pp=20


Hey bro i ran it and got 9th place cause i dont have dual chan ram yet and my water pump isent here..ill make ya proud whne i get back to 4.5ghz and smoke the hell out of the top 1 man :)

[Afturmath]

Sig for everyday with fan on Low speed. 250x11 when I keep my fan running at full speed (73cfm). I'm setting up my winter cooling soon and hope to be able to run 270x10.5. Managed to get 262x10.5 at 2.05v last year on a 1700 B at 22C Prime stable, so 270x10.5 on a 2500 M should do fine.

[heero884]

Hey bro i ran it and got 9th place cause i dont have dual chan ram yet and my water pump isent here..ill make ya proud whne i get back to 4.5ghz and smoke the hell out of the top 1 man :)

must resist getting d0 stepping pressy =x

[BitchBreaker]

Come on..u know u want 4+ ghz and to be in the 4ghz club!

[ati_azn]

dude. its hardly even stable now! im running it like 2.1ghz with 160something fbs and .1675 v with 4300+rpms blowing on it! i was plaing freedom fighter earlier for about an hour then all of a sudden the stupid thing froze up on me! wtf is going on! it was ok a few days ago and 3 days ago it justunderclocked all of a sudden and it wont even get stable!]
bump and BTW guys come on! look at the title! "post your amd Xp-M O/Cs here!" not "post your intel O/Cs here:"!!!

[BitchBreaker]

]
bump and BTW guys come on! look at the title! "post your amd Xp-M O/Cs here!" not "post your intel O/Cs here:"!!!


I own the top clocking AMD Mobile in here.... Icebawx has it ;) So we posted our top oc.. :o

EDIT there apears to be a 2.8ghz axp m in here but there be no screen shot to prove it...

[Sniviler]

Sup :cool:

[ati_azn]

well im back. my stupid amd xp-m 2600+ still wont get stable no matter what i do! as i said before it was fine a week ago when i o/ced it to ~2.5ghz and ~180 fsb but all of a sudden it just went back to defaults one day and ever since its been CRAP. wont even get stable at 1.7v, 2.1ghz, 150fsb and 4300RPM blowing on it! wtf is going on? and yeah i cleared the cmos every time it would crap out on me! HELP ME!!

[IceBawx]

Try reseating the cpu? How long were you overclocked, how far, and what voltage?

[ati_azn]

i was overclocked at ~180fsb, ~2.5ghz, ~1.65v, with ~3800rpm blowing on it for about 2 weeks and it was stable then one day i turned on my comp and i saw 800mhz and 133fsb on the BIOS and im like WTF! so i cleared the cmos and set it to about ~170fsb and 2.3ghz with 1.7v to see if it was stable, it wasnt even with 4300+ rpm blowing on it.i tried and tried, even tried reseating the ram into another slot. samething

[ryuji]

i was overclocked at ~180fsb, ~2.5ghz, ~1.65v, with ~3800rpm blowing on it for about 2 weeks and it was stable then one day i turned on my comp and i saw 800mhz and 133fsb on the BIOS and im like WTF! so i cleared the cmos and set it to about ~170fsb and 2.3ghz with 1.7v to see if it was stable, it wasnt even with 4300+ rpm blowing on it.i tried and tried, even tried reseating the ram into another slot. samething
*plays funeral music* (seems like it)

[CrimandEvil]

Every now and then my 2400 resets to 600mhz but it's just a matter of going into the BIOS and hitting the save and exit option and reboot, always comes back to 2.5 Ghz but it always comes back stable.

[ati_azn]

*plays funeral music* (seems like it)
awhhh...cant be!
edit: so whats up with it?

[ati_azn]

bump!!^^

[IceBawx]

Did you buy that cpu new or used? If you bought it used, it sounds like its on its way out :(

[Sniviler]

just a thought but hows the battery ?

[Stang Man]

first to reach 3Ghz + with an AMD Mobile XP processor...

http://marcin.fastlanehw.com/amd/nf7/3079mhz.gif

[distr0]

first to reach 3Ghz + with an AMD Mobile XP processor...




wow, what kind of cooling and what are your temps?

[MaMMa]

http://home.earthlink.net/~dzungq/images/2-1-1-11.jpg


SEE SIG

[ati_azn]

delete this help!

[IceBawx]

I'd bet MaMMa's OC would spank Stang_Man's ;)

[ati_azn]

first to reach 3Ghz + with an AMD Mobile XP processor...

http://marcin.fastlanehw.com/amd/nf7/3079mhz.gif
HOLY!! the first 3gig+ amd xp-m ive ever seen! whats cooling it and is it stable at 3gig+? and anyways yeah i brought my xp-m2600+ new from newegg on september or somewhere near that. well it might be my rams problem but imnot sure. a few months ago i brought my corsair pc3200 512 ddr from some crappy local store that had some kingstons and corsairs lying around their draws so the guy sold me one for ~50 buck. how is the mushkin pc3200 512 ram on newegg? i dont lan on doing some crazy O/Cs thats over 400 bus speed and over 2.6ghz just simple O/Cs like maybe 2.5ghz and 400 fsb like before

[MaMMa]

I'm gonna lower my FSB and see if i can get up to 3.0ghz. Mines on air btw :)

[Stang Man]

well... this is my max bench on air: http://service.futuremark.com/compare?2k1=7570816

try beating that. it's #1 AMD XP/9800 Pro air cooled score, for almost a whole year now.


i did that 3Ghz+ AMD XP-M back in February, or March 04.
it was using a Prometia Mach 1 (no mods), and was stable up to around 2975Mhz. past 3Ghz it started heating up too much and just crashing.


I wish i could bench 2900MHz+ and 245FSB like in my 23384 score, but the NF7 didn't like high voltages + high fsb, and would just start loosing PS2 ports and PCI devices.

that setup took A LOT of tweaking, and there's no way I can replicate it again. Everything was just right that day of benching, air temperature, voltages, windows install was perfect, etc...


check out my article at FLHW, http://www.fastlanehw.com/reviews.php?i=102

[Stang Man]

I'd bet MaMMa's OC would spank Stang_Man's ;)

let's see you spank something...

[Dojo | Warlord]

Rofl

[PigGeneral]

My Mobile died the same way. I was @ 2.6 ghz, the next day, comp boots up and its doing 800. Never did more than 1.2 after that. I took the heatsink off when I replaced it, and had a bad smell :( . Least it had the respect to hang on until I could purchase a replacement.

[quakefiend420]

got my mobile 2500 up to 2.5 on chilled air(air conditioned chill box)

had to push 2 volts to get that 1.97 by mbm

it was running at about 30C in ambients of -8C lol

[MaMMa]

let's see you spank something...

I'll try my best. I have 3 sticks of ram in my box so its kinda hard.

[BitchBreaker]

I wana spank something! :p

[MaMMa]

I wana spank something! :p

I've got a lonely money http://home.earthlink.net/~gnuzd/images/lol.gif

I mean monkey :)

[killernoodle]

first to reach 3Ghz + with an AMD Mobile XP processor...

http://marcin.fastlanehw.com/amd/nf7/3079mhz.gif

Man, I wish I still had my old 2.6m, it would do 2.9 on 2.1v until it decided to fry. Never got to try it on 2.2. My 2500 mobile kinda sucks, it will only do 2.8 @ 2.2v, but I dont like to run it under that kinda stress.

[BitchBreaker]

I've got a lonely money

Iv got a 3.2e i can run agenst teh amd's??? i might be able to run with ya! ;)

[gmkmay]

2600m@2.64. As shown in sig. Load temp around 45c, idle around 38.

[FaRKle0079]

Athlon XP 2800 Barton @ 2.4ghz @ 1.75.
33C idle 40C load @ 23C room temp with Thermalright SP-97, AS5, and 92mm Enermax UC-9FAB adjustable fan running at 3/4th speed.

[TSS Modder]

ill post for my buddy, blakangus, since he probably wont be on for a while.

Athlon XP-M 2200+; stock 1.667GHz; current OC as of this morning = 2.58GHz

running stable @ 31C, voltage=1.725, FSB=215, Multiplier=12

CPU cooler is ThermalRight or ThermalTake AX7, or something like that. discontinued i believe. and, of course, some good old AS5.

were hoping to be hitting a full 1GHz OC very shortly.

[ati_azn]

My Mobile died the same way. I was @ 2.6 ghz, the next day, comp boots up and its doing 800. Never did more than 1.2 after that. I took the heatsink off when I replaced it, and had a bad smell :( . Least it had the respect to hang on until I could purchase a replacement.

STOP THREATENING ME!!well im doing 1.53 now still 138 fsb though. dont have the balls to push it higher. scared its gona crash again. well atleast my table aint shaking like it used to be when i ram at 1.65+Vs :p

[Stang Man]

I'll try my best. I have 3 sticks of ram in my box so its kinda hard.

excuses, excuses.... take one or two sticks out!!

[IceBawx]

Lets see how far you can go with a 12.5x multy there Stang_man :p

[Spare-Flair]

XP-M 2500+

250 FSB x 10 = 2500Mhz
1.850V

yeah, I can get awesome FSB but the CPU really needs the volts unfortunately.

[MaMMa]

I tried, I'm locked at 2.8ghz :(

Anyways, I just sold my pc and going to DFI UT SLI D so woo hoo! :D

[Drake]

12.5x180, 1.75v = 2.25GHz

POS RAM holding me back. I got it to 220FSB with a friend's RAM.

[Stang Man]

Lets see how far you can go with a 12.5x multy there Stang_man :p

what for?

[BitchBreaker]

what for?


To see how buff your chip is..a multy oc is easy to hit,and high fsb oc is harder.

[MaMMa]

To see how buff your chip is..a multy oc is easy to hit,and high fsb oc is harder.

i thought the same. higher fsb is better then higher clock as well :)

[Stang Man]

i thought the same. higher fsb is better then higher clock as well :)

To see how buff your chip is..a multy oc is easy to hit,and high fsb oc is harder.

have you taken a look at my 3dmark score?? 245 fsb + 2.7ghz..


i've hit 250FSB on this nf7 before.. the maximum the bios allows for

edit: anyways, high fsb overclocks are just as easy as high multiplier overclocks. one oc's your cpu and the other oc's your mobo. in my case, i dont have a motherboard that can go past 250 (only because it's maxed out).. give me a DFI and I'll show you a high fsb + high multiplier clock.

[Clint]

system has been rock solid at 2.6ghz for the past month..figured i'd mess with it some more today.

got it running prime stable so far(30 mins) at 2.7ghz 1.8v 200x13.5
36c idle 47c load
http://www.clint.mwhq.net/oc3.jpg

my ram wont do anything stable above 200mhz. 210 and windows runs fine..but i get random application crashes and not prime stable.
220 windows boots, but crashed during prime.
my nf7s is virgin.. no volt mods on it at all so i wasnt able to try the ram above 2.9v.
i bet if i voltmod the ram to 3-3.1v i'll get it stable.

also got windows to half load at 2.8ghz..200x14 didnt give it enough juice tho. only at 1.85v.. once my watercooling setup on this box is done, i'll shoot for a stable 2.8ghz 1.9 ish volts. atm i'm on an slk900/TT smartfan 2 combo

[EvilAngel]

My oc is not as spectacular as some of the ones here, but for the reccord:

2400+ M 35w 11.5x230 = 2,645mhz @1.85v
Temps: 40C idle 46C load

Had to loosen my ram wont do over 210mhz in dual channel @ CAS2 but it doesnt show too much of a decrease in performance with cas set to 2.5ms. One stick can do 225mhz in CAS2 but loosing

[I(illa Bee]

back in the 32bit days...

XP2600-m
Abit AN7 (onwz ever nforce2 out there)
water cooling via maze 3 and chilled water.

Clocked her 12.5 x 225 = 2.8 Ghz! running 2.2v to CPU 100% stabel...it even posted @ 3Ghz...but only lasted like 2 seoucnd into windows loading..

BTW: Yes i belive the Abit AN7 ownz all, even the DFI lanparty. Wile it didnt have the FSB capibiltes the DFI dose, its had a great power circut that held the CPU and memory voltage very well, only fluxing by .05v...the DFI was good for people with good memory, and air cooling or no balls for high voltages...me my memory wasnt that hot (240 tops) but i want high voltage and the DFI couldnt do past 1.85 satbily..

[t10]

Stangman wtg on the OC!



Old shot of my My XP-M 2500+ on air (notice the date):
http://www3.sympatico.ca/t20/amd1.jpg

[Kankykur7]

2500-M at 2.4 (12x200)
1.75v
Abit NF7-S v2.0
Idle:40 Load: 50-55

[ati_azn]

back in the 32bit days...

XP2600-m
Abit AN7 (onwz ever nforce2 out there)
water cooling via maze 3 and chilled water.

Clocked her 12.5 x 225 = 2.8 Ghz! running 2.2v to CPU 100% stabel...it even posted @ 3Ghz...but only lasted like 2 seoucnd into windows loading..

BTW: Yes i belive the Abit AN7 ownz all, even the DFI lanparty. Wile it didnt have the FSB capibiltes the DFI dose, its had a great power circut that held the CPU and memory voltage very well, only fluxing by .05v...the DFI was good for people with good memory, and air cooling or no balls for high voltages...me my memory wasnt that hot (240 tops) but i want high voltage and the DFI couldnt do past 1.85 satbily..
the Albatron KX-18 pro and PRO II owns too! yumm n force 2 ultra :) . im going to try upping my M 2600+ again after i reseat the cpu and heatsink again. if that doesnt work ill switch to a kingston value ram pc3200 512mb.

[Jerunk]

back in the 32bit days...

XP2600-m
Abit AN7 (onwz ever nforce2 out there)
water cooling via maze 3 and chilled water.

Clocked her 12.5 x 225 = 2.8 Ghz! running 2.2v to CPU 100% stabel...it even posted @ 3Ghz...but only lasted like 2 seoucnd into windows loading..

BTW: Yes i belive the Abit AN7 ownz all, even the DFI lanparty. Wile it didnt have the FSB capibiltes the DFI dose, its had a great power circut that held the CPU and memory voltage very well, only fluxing by .05v...the DFI was good for people with good memory, and air cooling or no balls for high voltages...me my memory wasnt that hot (240 tops) but i want high voltage and the DFI couldnt do past 1.85 satbily..

Where did you learn English man? Your punctuation is decent but your spelling is terrible.

[Sniviler]

Where did you learn English man? Your punctuation is decent but your spelling is terrible.

I didn't know you were giving out grades ?

"Welcome to the [H]ard|forum classroom" :D

[malingjc]

see sig. I can run it up to 2300, prime stable with a 2500rpm HSF, but I'd rather not toast it so I'm running it at 2100 until I build another system.

[MaMMa]

see sig. I can run it up to 2300, prime stable with a 2500rpm HSF, but I'd rather not toast it so I'm running it at 2100 until I build another system.

2300 is nothing, whats the temps? Whats your vcore?

[ati_azn]

2300 is nothing, whats the temps? Whats your vcore?
i totaly agree. 2.3ghz is absolutely nothing for xp-m 2400+, 2500+,and 2600+s. just make sure you have good ram to go with the O/Cs and keep the temps under 60cand your all good. damn gotta get me some ram...

[I(illa Bee]

Where did you learn English man? Your punctuation is decent but your spelling is terrible.

I learned form the [H]ardForum! Dont cry over spilled milk, and dont spill milk in you case....

[BobSassafrass]

first to reach 3Ghz + with an AMD Mobile XP processor...

http://marcin.fastlanehw.com/amd/nf7/3079mhz.gif

you might wanna check xtremesystems.org before you make these bold statements. someone just hit 3.47 witha vapochill ls and i know someone else hit 3.04 last year with a mach II. now first on hardforum...maybe :D in any case awesome awesome awesome overclock, too bad i broke my pump last night or i would have to show you up :p

[CrimandEvil]

you might wanna check xtremesystems.org before you make these bold statements. someone just hit 3.47 witha vapochill ls and i know someone else hit 3.04 last year with a mach II. now first on hardforum...maybe :D in any case awesome awesome awesome overclock, too bad i broke my pump last night or i would have to show you up :p
You do realize he did that some time ago. :rolleyes:

[Jerunk]

I learned form the [H]ardForum! Dont cry over spilled milk, and dont spill milk in you case....

What?

[Spare-Flair]

Just something I've noticed through personal tests...From this thread, I gather I probably have the highest FSB out of all of you even though I don't have a great CPU (I've done 260FSB before and on other forums, I know others who are faster).

The Athlon XP is bandwidth starved, giving the system more FSB is actually much more effective to your CPU than increasing the clock. I ran Sisoft Sandra's CPU arithmetic and multimedia benchmarks (can't remember values right now but I'll check later).

Basically, when running the CPU @ 253x9.5 = ~2.4GHz, 506FSB , the CPU benches were MUCH MUCH faster than the CPU @ 228x11 = ~2.5GHz, 456FSB.

Just goes to show that high CPU clock doesn't mean everything. A 250x10 (2.5) can probably go toe to toe and maybe even beat a 200x13 (2.6). I don't have the numbers or the CPU to test right now to back me up, but that's just something I found out playing around a few months ago. I'll try to duplicate my results and grab some screens for you guys.

[karsten]

Just goes to show that high CPU clock doesn't mean everything. A 250x10 (2.5) can probably go toe to toe and maybe even beat a 200x13 (2.6). I don't have the numbers or the CPU to test right now to back me up, but that's just something I found out playing around a few months ago. I'll try to duplicate my results and grab some screens for you guys.

well it probably depends on what programs/benches you're talking about. i'm sure that more fpu intensive apps like distributed computing projects benefit more from a higher Ghz than bandwidth, which they won't really ever touch.

it probably depends on what you're needing to run i guess.

[qb4ever]

I got my new Zalman 7000B-CU cooler and it does 200X12.5 = 2.5ghz @ 1.775V ran 12 days prime stable :D :D :D Currently reading 54C cpu temp running folding@home, room temps is 110F :eek:

Bad thing is I go for 2.6ghz and it fails prime 95 instantly@ any vcore with a rounding error

[distr0]

just got my mobile 2500 up and running at 2.5 (10x250) last night @ 1.825v. only problem is that is that it gets too hot for my liking (around 58c after a few hours of prime) and my desktop xp 2600 never got that hot at a higher voltage

i need watercooling :D

[Stang Man]

you might wanna check xtremesystems.org before you make these bold statements. someone just hit 3.47 witha vapochill ls and i know someone else hit 3.04 last year with a mach II. now first on hardforum...maybe :D in any case awesome awesome awesome overclock, too bad i broke my pump last night or i would have to show you up :p

where do you think i "lived"??

http://www.xtremesystems.org/forums/showthread.php?postid=373841#post373841

i was the one who did 3GHz last year, and it was a stock r134a Mach I

[Schmucker]

I'm running very stable with 200x12 with 1.72vc on an AN7 with 2600+. This is my first real attempt at overclocking. I can't seem to get it above 200 on the clock. Just tends to crap out at anything higher. Probably my old ram, 512mb Corsair w/heat spreader PC2700. Anything I can try to get maybe 2.6ghz out of the processor?

[distr0]

I'm running very stable with 200x12 with 1.72vc on an AN7 with 2600+. This is my first real attempt at overclocking. I can't seem to get it above 200 on the clock. Just tends to crap out at anything higher. Probably my old ram, 512mb Corsair w/heat spreader PC2700. Anything I can try to get maybe 2.6ghz out of the processor?

is it a mobile 2600?

[mattsmall]

2500m at 2.73ghz on water cooling shes been running this speed for about a year now and no problems what so ever.

[TekieB]

2 2200 35w chips at 17x133 @ 1.75v in a dualy rig

[I(illa Bee]

2 2200 35w chips at 17x133 @ 1.75v in a dualy rig


nice...

[I(illa Bee]

What?


easy, dont cry if you spill milk, and its not a good idea to spill milk in your case... dua....

[MagneticHelmet]

xp-m 2600+ 200x13 1.75v

[Schmucker]

is it a mobile 2600?
Yes, the topic is about XP-M chips.

I got a memory error after playing CS:S for a half hour. I'll try playing again later to see if it was a fluke or if it is true instability. If instability, what's the solution? Naturally underclock it a bit, but would raising the vcore a bit more be beneficial? It is at 1.72 in the bios and the Abit utility says it is actually about 1.75 with the computer on.

[distr0]

Yes, the topic is about XP-M chips.

I got a memory error after playing CS:S for a half hour. I'll try playing again later to see if it was a fluke or if it is true instability. If instability, what's the solution? Naturally underclock it a bit, but would raising the vcore a bit more be beneficial? It is at 1.72 in the bios and the Abit utility says it is actually about 1.75 with the computer on.

i know, but look up and you can see several posts about desktop bartons as well as some about the p4 (?) so i was just checking :)

the exact thing just happened to me playing hl2. my vcore was at 1.8 but watching the voltages they were very unstable. i think its time to invest in a new power supply, so for now i dropped down to 2.4ghz. you may want to monitor your voltages at idle and under full load, see if they jump around alot and/or drop under load.

[scottatwittenberg]

my 2200+ 35w topped out at 2.55ghz @ 1.9v.. but my computer won't post past 1.9v.. in a shuttle sn41g2v2.. but then i added a ton of crap into my computer.. 2nd hdd, vid card, wireless G, 2 sticks of memory.. and my temps kept going up.. so i put it at 2ghz @ 1.45v and haven't cared to change it since..

i did run it at 2.4ghz.. 1.76v ish.. i think.. i can't remember anymore.. for several months.. i know it was 12 x 200.. and i did 210 x 11.5 for a long time too..

here is a chart i made:
i have to reupload it..

ok:
http://www.scottsnyder.net/images/2200+xp-m35.gif

[karsten]

hey that's a cool idea, what do the two different colored lines represent? the exp. curve and actual vcore?

[PEZOHOLIC]

Mine is in the sig XP-M 2400+

This thing (havent extensively tested it since MOSFET HS were added) will only do 2.367 prime95 6+ hours stable....I want the high FSB not the multi.

What do you guys think of the NB fan/hs? I mean I touch it and it isnt even really warm, yours? I have AS2 under it. Also I have a HS on the SB since that thing got hot as hell.

So far right now running at 235fsbx10.5=2355mhz @ 1.825v in BIOS actual 1.776v
Ram OCZ3200gold 200mhz 2-3-3-6 @ 235mhz 2.5-2-2-5 w/ 2.8v

Does your NF7 strip so much voltage?? I mena .05v is A TON EVEN FOR AN NF7, and I have the mantaray d26 bios which is suppose to up the vcore .025.

I report idle temps at 43c and load at 54c that sounds high for my speed. My AX7 is suppose to still be a good HSF and I have a really nice mechatronics 80mm that is fast but very quiet.

LMK
Joe

[TheGamerZ]

http://www.relantless.net/cpuz.jpg

[scottatwittenberg]

i just made the lines.. they are my best guesses at what voltage should be required to hit a certain ghz.. but there was no math or anything involved in making them... just photoshop..

[karsten]

well that's a pretty good chip then, cuz my m2600+ takes about 1.85 to get 2472.5GHz :)

[scottatwittenberg]

oh yeah.. every X represents a time that the computer was at least stable enough to boot into windows, let me open photoshop, edit the photo and save it..

some times i could open photoshop, but not save it, siht like that.. but the x's aren't really "stable" that's why the line is generally above them..

and i am happy with the performance i got from that cpu. it was $77 and the 2400+ 35we wat $85 at the time.. and i took a gamble going on the assumption that it would at least be as good as a 45watt 2400+ for less money.. and it worked well for me.. now i just need to get a panaflo or something for my shuttle so i can account for the extra heat created by all of the extra stuff i have put in it recently.. and then OC some more again...

[tommo]

I've got a slight O/C on my 35w 2200 mobile; 1.8v, 168x12.5 ( 2.1ghz). Epox 8rda3i, 333mhz crap ram. Not worth showing, but I do have a question, and a reason to why I can't get a higher o/c.

I can't get the multiplier any higher in the BIOS. Is the multiplier locked upwards?

[Spare-Flair]

2500m at 2.73ghz on water cooling shes been running this speed for about a year now and no problems what so ever.

What voltage?

[Spare-Flair]

Mine is in the sig XP-M 2400+

This thing (havent extensively tested it since MOSFET HS were added) will only do 2.367 prime95 6+ hours stable....I want the high FSB not the multi.

What do you guys think of the NB fan/hs? I mean I touch it and it isnt even really warm, yours? I have AS2 under it. Also I have a HS on the SB since that thing got hot as hell.

So far right now running at 235fsbx10.5=2355mhz @ 1.825v in BIOS actual 1.776v
Ram OCZ3200gold 200mhz 2-3-3-6 @ 235mhz 2.5-2-2-5 w/ 2.8v

Does your NF7 strip so much voltage?? I mena .05v is A TON EVEN FOR AN NF7, and I have the mantaray d26 bios which is suppose to up the vcore .025.

I report idle temps at 43c and load at 54c that sounds high for my speed. My AX7 is suppose to still be a good HSF and I have a really nice mechatronics 80mm that is fast but very quiet.

LMK
Joe

I don't have an NFS7 but I have a fan blowing on my motherboard because the mosfets get really hot and I replaced my SB as well on my DFI Infinity. I think your ram is holding you back from higher FSB, but that's good for an NFS7 board, that's about as far as they go.

[PEZOHOLIC]

Hi guys,

New news, I think the chip is limiting me. With 1.925v in the bios (effectively 1.87v) I still cant really get her to do 2.4ghz+

With that in mind I went back the board and decided to try for more FSB and relax the mem timings a little. Also CPU INTERFACE=Enabled, if not I lose a ton of points in Sisandra.

9.5x247=2350mhz @ 495mhz FSB. Man that is rocking SiSandra.
Core at 1.875v Bios (about 1.82v effectively)
VDD 1.7v (this fucker never seems to do anything but wth)
Ram 3-2-2-11 @ 2.9v
12v Rail likes to fluctuate from 11.55v to 11.67v under full load (via MBM5) THAT BAD?

Still running stock NB fan, seems to get a little hotter now but nothing like the temps of the SB before I put a HS on her. God I love this ram, got her for $75 shipped here on the forums and wow she really impresses me doing 247mhz out of the box!!! I wonder what chips it has???

Sisandra memory benchs report ~3600 and 3300 I believe (at school right now)
NO DUAL CHANNEL
NO CAS 2 of ANY KIND

Pretty decent ey?

[scottatwittenberg]

I've got a slight O/C on my 35w 2200 mobile; 1.8v, 168x12.5 ( 2.1ghz). Epox 8rda3i, 333mhz crap ram. Not worth showing, but I do have a question, and a reason to why I can't get a higher o/c.

I can't get the multiplier any higher in the BIOS. Is the multiplier locked upwards?


higher than 12.5? i can adjust my multi wherever i want.. it doesn' tlike 13 i think.. form what i remember.. i don't even know what i have now.. i guess 10 x 200.. yeah.. will your bios let you go past 12.5? oh... now that i remember.. i think a lot of motherboards don't go past 12.5.. look it up.. you might have to flash your bios, or even do a wire mod.. or loosen the timings on your ram and see if you can get it to 200..

i would blame your motherboard.. i have no idea obut that mobo.. but that would be my guess.. also, can you get 2.1ghz at a lower voltage? i would guess that you could do that at 1.6v if not less...

[XeroHouR]

I have screenies of mine at 2.8 gighz at 200mhzfsb and 500mhz fsb at 2.4 gighz. It ran D2D 2.75 at 2.0V on pretty good water cooling, 42oC load after 2 days. Would do 2.815 and hit a wall with 2.15V, (darent put more though it). That chip has since been sold, I do miss it though, it was a tough little worker, and unlocked multis own....

[mwarps]

2400+M 45W @ 2.4GHz (200x12) 1.95V with reversed watercooling.

Win some, you lose some.

2600+M here I come!

[tommo]

higher than 12.5? i can adjust my multi wherever i want.. it doesn' tlike 13 i think.. form what i remember.. i don't even know what i have now.. i guess 10 x 200.. yeah.. will your bios let you go past 12.5? oh... now that i remember.. i think a lot of motherboards don't go past 12.5.. look it up.. you might have to flash your bios, or even do a wire mod.. or loosen the timings on your ram and see if you can get it to 200..

i would blame your motherboard.. i have no idea obut that mobo.. but that would be my guess.. also, can you get 2.1ghz at a lower voltage? i would guess that you could do that at 1.6v if not less...

The multiplier has options for higher than 12.5 (think it goes to 18 or something), but it won't boot any higher than 12. I know the original multiplier was 133x12.5 because it's clocked as 1.6ghz, so it would make sense to have the multiplier locked at 12.5.

I'll let you know about the o/c @1.6v tomorrow, ill get put it at 1.6v tonight and run it on prime95 till i wake up. Thanks for the tip.

Update: Prime95 failed at the overclock (168x12.5 , 1.6v) after 2 hours 7 mins 1 sec :mad:

[PEZOHOLIC]

haha tommo YGM I need your paypal addy!!!


Anyway wow, last night Prime95 for 9 hours at 246mhz=2342mhz@492fsb

One thing I have noticed is that after about 30 restarts, crashes or w/e you wanna call it Windows XP (sp1 lol) takes a mad shit and must be re-installed to get the most outta any CPU. I could get into windows on at about any speed but once I tried to do anything NOTHING would load after about 3 mins in windows.

Well re-installed windows and bam shes going on Prime95 about an hour now at 495mhz FSB@2351mhz. 2.9v CAS 3-2-2-5 Core@1.82v max VDD 1.7v CPU interface=ENABLED

[tommo]

One thing I have noticed is that after about 30 restarts, crashes or w/e you wanna call it Windows XP (sp1 lol) takes a mad shit and must be re-installed to get the most outta any CPU. I could get into windows on at about any speed but once I tried to do anything NOTHING would load after about 3 mins in windows.


hahah
When I clocked my shitty ram too high, without upping volts, Windows stopped before entering the GUI, and said it was missing files. (???)

[distr0]

i can run 250 fsb but i get random crashes, i think i need a new power supply. any suggestions what else it could be?

[themolt]

site for abit nf7-s owners to call home

Benchmark Rankings (http://s3.invisionfree.com/Abit_NF7_S_Board/index.php?showforum=10)

Main site (http://s3.invisionfree.com/Abit_NF7_S_Board/index.php?)

[I(illa Bee]

site for abit nf7-s owners to call home

Benchmark Rankings (http://s3.invisionfree.com/Abit_NF7_S_Board/index.php?showforum=10)

Main site (http://s3.invisionfree.com/Abit_NF7_S_Board/index.php?)

Is this a new site or been around a wile...

[ati_azn]

hey my topic is up again! anywas heres the update. my 2600+xp-m does whats in my sig most of the timebut sometimes the crappy ram craps out on me and i have to set the multi by .5x and fsb by 1-2mhz to clock it back up again. it seems to be less power hunggry now i dont know why. ill get some kingston soon when i get the time.

[themolt]

Is this a new site or been around a wile...
brand new.

[scott77]

Just got my XP-M machine set up today...specs are in sig

I got it up to 200x13 stable @ somewhere between 1.85-1.9v, then bumped up to 200x13.5 and it wouldn't boot even with a Vcore of 2.1v

So I'm back to 200x13 for now

my temps @ 1.9v are 49c load, not sure what idle is since I've been running Prime95 all night :p

I'll post some screenshots tomorrow or maybe later

Any ideas as to how I can get it to boot at 200x13.5? :(

edit: heres a screenshot of cpuz

http://storm.lackluster.net/albums/misc/2606mhz.png

:D load is 48C

[distr0]

^^^ what do you have for cooling scott77?

[scott77]

its in my sig ;)

For now its a AX-7 with 80mm Tornado.. waiting on the rest of my WC parts to finish up my kit (hopefully sometime next week)

[ati_azn]

bahh. stupid ram is crapping out on me again. now it refuses to let my FSB go over 170mhz and thats like 340 bus speed? i need to find the fsb:ddr ratio setting in my albatron kx-18 bios but i cant find it!! bahh!. anyways its funning at ~2.5ghz 1.65v and 166fsb which is ~333 bus speed. everything is stable

[mwarps]

Preliminary results:

Test System:
Shuttle SN45G
Corsair C2 PC3200 (black) 512MB @ 2-3-3-6, 200 MHz
Radeon 9600XT 128MB
Thermalright SI-97 (DAMN GOOD HS) and Panaflo 92mm M1A. Best. Combo. Ever.

IDYHA 2600+ 0503 #1 (I have three of these chips, all from the same wafer, two consecutive)
1.8V:
Posted 2700MHz
Tried to turn down to 2600, would not post.
Reset BIOS, Priming at 2500 MHz.
Temp 42C in 20C ambient

Will update with other two chips and priming results within the next three days.

[Spare-Flair]

250x10.5 =2.625GHz on air with SI-97.

My mobile chip sucks though, it needs 1.925volts to do this. People on the DFI boards can get 2.7 and 2.8GHz on 1.75-1.85volts and some have 260FSB.

[BIGG_RAY]

my mobile chip is raw...and my Kingston BH-5 loves volts...running 240x12=2880 (2-2-2-11 CPC ON) 1.9 vcore and 3.1vdimm 6800gt @ 450/1200 /w 1.5 volt mod, all on the dfi infinity pace beotches

[mwarps]

250x10.5 =2.625GHz on air with SI-97.

My mobile chip sucks though, it needs 1.925volts to do this. People on the DFI boards can get 2.7 and 2.8GHz on 1.75-1.85volts and some have 260FSB.

That much voltage on air is asking for pain and misery.

[ati_azn]

yep. im running now 1.75 on crappy store bought compoud and Tt blower and i get 62'c full load and 42'c idle (~70'f room tempature with an air purifier blowing under my case) . im going to need some AS5 before summer comes and fries the amd xp-m 2600+ :eek: .

[mwarps]

yep. im running now 1.75 on crappy store bought compoud and Tt blower and i get 62'c full load and 42'c idle (~70'f room tempature with an air purifier blowing under my case) . im going to need some AS5 before summer comes and fries the amd xp-m 2600+ :eek: .

Honestly, dude.

Respect the 2600+M. Give it some love. SI-97 and Panaflo M1A. You won't be sorry.

[ati_azn]

whoop just did a hsf reseating and clean out the old compound. i used the same compound and it just lowered idle by 1'c and load by 1'c and socket by 1'c. sucks. im going to try AS5 first since i brought this crap tube of craptastic gunk from a craptastic store for 3 freaking bucks. if the AS5 doesn lower the load to 55 or less and idle to 40 or less then im going to try a new hsf. the si-97 is a bit too expensive for me, any thing under 40 ?

[mwarps]

whoop just did a hsf reseating and clean out the old compound. i used the same compound and it just lowered idle by 1'c and load by 1'c and socket by 1'c. sucks. im going to try AS5 first since i brought this crap tube of craptastic gunk from a craptastic store for 3 freaking bucks. if the AS5 doesn lower the load to 55 or less and idle to 40 or less then im going to try a new hsf. the si-97 is a bit too expensive for me, any thing under 40 ?

I just bought the SI-97 for 39.99 at frozencpu.com.

It's under 40.

:p

EDIT: $34.99 at crazypc.com, $35.99 at sidewindercomputers.com

[Spare-Flair]

That much voltage on air is asking for pain and misery.

55º of idling pain and misery. You don't want to know how hot it gets on load. I usually crank it back down to 1.85v and 250x10 if neccessary or ambient room temperature (circulation in my house sucks) is too warm.

[ryuji]

when i had my athlon.. i had to turn the heat off in my room... and run a window air conditioner durring the winter

in the summer, i needed to run the window unit full blast 24/7 AND have the central air running to keep my room cool.. with comp not running my room grows icicles... that was idling on my athlon-xp at 2.6 ghz and 1.75v i think the fsb was somthing like 220 or 230
one thing thats nice about the p4... full load on p4 is pretty much the heat your room up quality of a athlon-xp idling

[ThreeCub3d]

I have a AMD Athlon XP-m Mobile 2800+ processor , I'm wondering how to overclock this stupid thing , when I go into bios it lists the processor and all the information but when I hit the down arrow to scroll down and enter the processor catagorie , I know this is basic but i can't seem to figure it out , :confused:

[ati_azn]

you couldve taken that question to another thread since it saids "POST YOUR AMD XP O/Cs here not ask questoins about amd xp-ms here. but w/e, are you running a lappy? because i dont hear of much people buy amd xp-m 2800+ for their non lappy rigs.. :confused:

edit: btw i have this crap. same fan (desk shaking blower that doesnt blow very well.. :rolleyes: ) but i think its a different larger heatsink.

[joethemole]

max stable: 12.5x200 on 1.725

max good stable: 11.5x227 on 1.725

lowest voltage ever: 2.4 ghz on 1.600

current: 10x222 on 1.600


the only reason i have it on only 3200+ speeds is because i have a *silent*, yes silent, rig. my idle right now is 53c... and this is the only respectable speed i can get without raising the vcore further than 1.600, or overheat (...serious overheat)

[joethemole]

yep. im running now 1.75 on crappy store bought compoud and Tt blower and i get 62'c full load and 42'c idle (~70'f room tempature with an air purifier blowing under my case) . im going to need some AS5 before summer comes and fries the amd xp-m 2600+ :eek: .

haha my max temp ever was 67c on prime 95 before it failed, the test i mean... woot go mobile

[ati_azn]

woot. hit over 70c full load with my xp-m now. hee hee. check out the other thread about the highest temp youve ever hit. just ahppened before during my shower. sirens blaring and a messsage popped out " wanring your cpu has hit over 70c!". record breaker! boy im gona need some as5 and a sl-97 ASAP

[JV2112]

Sig ;)

[mwarps]

Sig ;)

It's not an XP mobile. If you want to wank your OC, do it in an A64 Thread. Otherwise, go shell out for a mobile and then come back.

[I(illa Bee]

It's not an XP mobile. If you want to wank your OC, do it in an A64 Thread. Otherwise, go shell out for a mobile and then come back.

Amen

[orvil01]

hmmm.....12.5 x 200 for now its a 45w 2500+ 1.8v seems the nf7-s undervolts though so its more like 1.725. I could go further, but im happy with 2.5ghz, now i just need to tweak it.. Up the fsb, and see if i can get the voltage lower. the sl97 does a good job, but i need to get some as5 i have some antec crap now.

[ati_azn]

what the highest temps youve guy have hit on your amd xp? i hit over 70 last night. now i have to decrease voltage by .5 and clock to 2.26ghz..still runs over 55 when im surfing the net...

[mwarps]

what the highest temps youve guy have hit on your amd xp? i hit over 70 last night. now i have to decrease voltage by .5 and clock to 2.26ghz..still runs over 55 when im surfing the net...

The highest I have ever been on a mobile is 75C. Watercooled, no less! But I left the fans off for three hours while watching TV (AIW card), and she was folding, so it got hot.

[klowngoblin]

i have a piddly OC

2500@2.2@1.65V stable (i think everyone has done this with the 2500)

[orvil01]

what the highest temps youve guy have hit on your amd xp? i hit over 70 last night. now i have to decrease voltage by .5 and clock to 2.26ghz..still runs over 55 when im surfing the net...


i was playing with the sl-97 when i first got it and ran it without a fan suprisingly at stock voltage it idled at 40c that with the extremely low airflow 120mm fans that came stock in my case, im thinking about changing them for something with more airflow but cant decide on what fans to get.

[distr0]

i can run my 2500-M @ 2.53 (1.85V) around 53c load with crappy watercooling, but switced to 2.42 (1.75V) load temps around 46c

which would you use?

[Sniviler]

i can run my 2500-M @ 2.53 (1.85V) around 53c load with crappy watercooling, but switced to 2.42 (1.75V) load temps around 46c

which would you use?


If your only getting an extra 2 FPS while playing games then I'd have to say 2.42.

what are your returns being at 2.5 ? , are they worth the heat and possibly shorter cpu lifespan ?

[streetknight]

heres mines with a pin mod(mobo does not allow higher multipliers)http://img.photobucket.com/albums/v630/streetknight/untitled.jpg

[ati_azn]

whoa damn nice clocks with 1.65 volts! mine wont even O/C that high w/o going up to 1.75 or more :confused:

[athlon3400]

http://img168.exs.cx/img168/9845/cpuz1tf.th.jpg (http://img168.exs.cx/my.php?loc=img168&image=cpuz1tf.jpg)

http://img168.exs.cx/img168/3449/untitled3ug0ij.th.jpg (http://img168.exs.cx/my.php?loc=img168&image=untitled3ug0ij.jpg)


Not my constant clock just the highest stable(2 hours of prime torture test) I have been able to acheive, Thats running off a custom watercooling setup with a 12" heatercore and a Danger Den RBX with 1/2"ID fittings.

My everyday speed is 285 * 9.5 on a DFI lanparty Ultra B with the same chip.

-Athlon

[DaLurker]

http://img168.exs.cx/img168/9845/cpuz1tf.th.jpg (http://img168.exs.cx/my.php?loc=img168&image=cpuz1tf.jpg)

http://img168.exs.cx/img168/3449/untitled3ug0ij.th.jpg (http://img168.exs.cx/my.php?loc=img168&image=untitled3ug0ij.jpg)


Not my constant clock just the highest stable(2 hours of prime torture test) I have been able to acheive, Thats running off a custom watercooling setup with a 12" heatercore and a Danger Den RBX with 1/2"ID fittings.

My everyday speed is 285 * 9.5 on a DFI lanparty Ultra B with the same chip.

-Athlon

:eek: That's an insane overclock!! I wish I could overvolt that much.. and that my CPU wasn't so shitty. :(

[honkee]

i have a mobile 2600
iqyha 0407 xpmw from excaliberpc, this was fresh from an rma before they went out of business.
man fuck that company, but thats a whole different thread.

2600 mhz at 1.725 volts prime stable
200x13
i can get like 2500 mhz at 1.6 volts
200x12.5
every volt i raise i can get almost 100 mhz

i think it craps out at 2800 mhz at 1.85 volts
havent tried higher
its a really nice chip, i got a beastly ass mobile

[Blinkme323]

What should I do. I have an Athlon 2500 and Abit NF7-S ver. 2.0. I am using 2X256 Dell pc3200 2.5x3x3x6. It has the stock heatsink, but I can buy an aftermarket one for $20. I am using an Antec 400 watt power supply. I haven't received it yet and am new to overclocking, so any help would be appreciated. I was thinking 11X200 for starters and maybe jumping the bus to 210 and raising the timings to 2.5x3x3x11. What do you think? Also, how will this perform; can somebody give ballpark 3dmark01 scores. I have a 9700 pro@330/660. My P4 2.8/133 got 15000.

[54YW4T]

http://img.photobucket.com/albums/v318/marcecko27/CPUZ2.jpghttp://img.photobucket.com/albums/v318/marcecko27/EQ3.jpg

[Kankykur7]

to Blinkme323

except for the ram and the psu both of our systems are virtually the same. so what i would recommend is pushing the FSB up to 200 first, which i believe you said you would do. and then see how far you can get past that. my corsair ram stopped at 200 and wont go 5mhz higher. if this happens to you, start upping the multiplier by half steps until that maxes out. plus this whole time you should watch the voltage (anywhere below 1.8-1.9 is fine for aircooling).if you want a better heatsink, the Thermalright SI-97 is a good cheap heatsink which i think you can find for $20. 3Dmarks, in 2k1 i would expect somewhere around 13k at stock, 15k for 2200 and at 2400 where im at i get around 17k. however, because you have a different psu, ram, and a different chip, i cant guarantee you'll get that score. .

good luck and happy O/Cing!

[distr0]

If your only getting an extra 2 FPS while playing games then I'd have to say 2.42.

what are your returns being at 2.5 ? , are they worth the heat and possibly shorter cpu lifespan ?


yeah i just went back down to 2.42, cant really notice the difference in preformance

it actually got up to around 55c at 2.5, so i'd say a ~10 degree difference for 100mhz is not worth it. just wait till i get a new power supply and a descent water pump (using a $20 pump from wal-mart right now) :D

[Blinkme323]

I am buying a gig of g-skill cas 2.0 ram for $98 and am wondering what overclocks I will be able to get with that. I have a Mobile 2500 and Abit NF7-S ver 2 and a thermaltake s462. I could raise the latency of the ram to 2.5x3x3x11 and I hear it overclocks really well even with stock timings. The old owner said he was running 250 bus under water cooling. What do you think would be adequate for me. 240X10 maybe?

[Badger]

http://img.photobucket.com/albums/v245/Nathan49456/OC.jpg

Just got that AMD 2400+ 35W. I'll probably run it at that speed for everyday use, it's stable and quick, not to mention runs pretty cool (notice temp there, at idle) in a case that's naturally warm from slow spinning fans (computer is nearly silent).

[badteddy]

hey folks! sorry if this is a dumb ass question.. im just wondering wat temp should my cpu be at? i have a athlon xp-m 2500...

Lian Li PC-65 Silver Case
AMD Mobile Athlon XP 2500 (1.8ghz -> OC'd to 2.4ghz)
DFI "LANPARTY NFII ULTRA B" nForce2 Ultra 400 Chipset Motherboard
Thermalright SLK900-A with Vantec Stealth 92mm
2x512 Corsair Extreme edition PC3200 DDR RAM so thus 1Gig of RAM
Enermax PSU 350Watt?? i forgot LOL
HP CD-Writer+ 9100 (replacing soon with those below)
Mad Dog Multimedia PC slot fan


Graphics Card: nVIDIA e-GeForce 6600GT (my pride and joy) (should i overclock this too?? dunno...)

Harddrives:
SATA 160Gig Western Digital
80GIg Western Digital
8Gig Maxtor (oldest backup i'll get rid of it soon)

Coming up:
DVD-ROM drive
Plextor SATA DVD Burner

[alpnwhite96]

XP-M 2600 here

211 x 10

MSI K7N2-L
1GB PC3200 Geil Ultra Series Dual Channel
$10 Masscool Fan
+1 Overclocking newb.

still trying to figure out how to get more o/c out of this thing... maybe my mobo isn't up to it?

[mwarps]

Burning in my third 2600+M Now.

First two:
2.50GHz @ 1.8V stable, air, max at about 42C.

This one:
2.6GHz @ 1.9V, water, about to hit 50C

May just back it down to 2.5/1.8.. a nice round 7.5GHz folding in my apartment.

[streetknight]

whoa damn nice clocks with 1.65 volts! mine wont even O/C that high w/o going up to 1.75 or more :confused:
yeah but mines is just a pin mod. going to try to up the fbs later, first im going to put it in my custon case then i will see if i can water cool it to get it higher.

[chappin317]

2600+ @ 2800mhz: 200x14 @ 2.0v

I will be feeding the cpu 2.1v+ to try and hit 3ghz :)

what kindof cooling are you giving it?

[ryuji]

Burning in my third 2600+M Now.

First two:
2.50GHz @ 1.8V stable, air, max at about 42C.

This one:
2.6GHz @ 1.9V, water, about to hit 50C

May just back it down to 2.5/1.8.. a nice round 7.5GHz folding in my apartment.
and how many BTU's is your air conditioner that you run in the winter?

[ati_azn]

hey folks! sorry if this is a dumb ass question.. im just wondering wat temp should my cpu be at? i have a athlon xp-m 2500...

Lian Li PC-65 Silver Case
AMD Mobile Athlon XP 2500 (1.8ghz -> OC'd to 2.4ghz)
DFI "LANPARTY NFII ULTRA B" nForce2 Ultra 400 Chipset Motherboard
Thermalright SLK900-A with Vantec Stealth 92mm
2x512 Corsair Extreme edition PC3200 DDR RAM so thus 1Gig of RAM
Enermax PSU 350Watt?? i forgot LOL
HP CD-Writer+ 9100 (replacing soon with those below)
Mad Dog Multimedia PC slot fan


Graphics Card: nVIDIA e-GeForce 6600GT (my pride and joy) (should i overclock this too?? dunno...)

Harddrives:
SATA 160Gig Western Digital
80GIg Western Digital
8Gig Maxtor (oldest backup i'll get rid of it soon)

Coming up:
DVD-ROM drive
Plextor SATA DVD Burner

first of all what temps are you getting now. its easier that way so we know if your running normal temps.

edit: PLEASE change your sig. its way too long, i think the biggest is supposed to be 10 lines or less.

[mwarps]

and how many BTU's is your air conditioner that you run in the winter?


Rochester, NY is my air conditioner. It was 65*F on Thursday. It's snowing right now.

[badteddy]

first of all what temps are you getting now. its easier that way so we know if your running normal temps.

edit: PLEASE change your sig. its way too long, i think the biggest is supposed to be 10 lines or less.

Processor Temperature : 49.5 °C
Mainboard Temperature : 43 °C
Power/Aux Temperature : 127.5 °C
Hard Disk Temperature #1 : 35 °C
Hard Disk Temperature WDC WD800JB-00FMA0 13.03G13 : 32 °C

this is with my side panel open and just browsing and chatting. if i close it and play games i notice it reaches up to 60 or so. btw thanks for the advice on my sig i forgot about it

[epicengr]

|||
|||
\/

[Chernobyl1]

My Mobile 2500+ runs at 2.7GHz 2.0V with a custom made watercooler:
Eheim 1048 pump
1/2" ID tubing
Ford Sierra heatercore
Antarctica Block (1/2" OD)

Temps last time I checked
30C idle
38C load

The CPU will run at 2.76GHz but for rock stability in all weather I keep it at 2,7GHz.

[mnewberg]

I went from a normal Athlon XP to the mobile. I wasn't looking for an overclock, but I was able to get it up to 2ghz with out trying. The chip is a 2200 35watt that was really cheap. The results are amazing. No longer is my case hot becuase even under full load the CPU is still about 100F(38C). If you are buying a cheaper chip, and dont mind buying a slightly more expensive Mobo, the mobile is the one to get.


http://mnewberg.com/images/overclock.png

[scottatwittenberg]

that is almost exactly what i am running at right now.. except i have 1.472v on the cpu.. i think it ran fine at 1.45v but crashed after a few days or something.. i run f@h so i want to be sure the cpu has enough volts to not corrupt data too.. but the 2200+ 35w has worked well for me.. my cpu runs about 45c cause i have shuttle.. it was closer to 50 before i took my extra hd out and stuck it in an external enclosure

[meatfestival]

Anyone know why I'm having such a hard time overclocking this mobile 2500+? My board is an Asus A7N8X Deluxe rev2 and the CPU stepping code is AQXFA.

At 200x11 it needs vcore at 1.7v to be stable in prime95 and superpi (not simultaneously).

At the moment I'm running it at 200x11.5 and even with the vcore at 1.825 (the maximum on this board), it's not always 100% stable. I've also tried going up to 200x12, but the computer restarts within minutes.

I have managed to run prime95 for several hours at up to 2.35Ghz, but other times I've had it fail, restart or lock up completely after around an hour, or even a couple of minutes. There doesn't seem to be any consistency to these results.

It may just be my imagination, but it seems to be slightly more stable when I have the side of the case removed. The temperatures go from about 51c idle / 57c load to about 42c idle / 50c load. However, at times it has been completely unreliable with the case open. The temperatures with the side panel on are fairly high, but not critically so, I would have thought?

The other thing is my PSU - I just bought a new antec truepower 430. It has 26a on the +12 rail. The readings on the Asus voltage monitor are: 11.776 (+12v), 4.838 (+5v), 3.248 (+3.3v). Are these normal? I don't see any spikes or dips in the readings at all.

It seems to be pretty stable for games and everyday use, but the prime95/superpi failures are a bit worrying, and of course I would really like to clock it higher, as I assumed from all the articles I'd read that you could get it going easily at 2.4Ghz with just a small vcore increase. However, I also gathered that the first batches of XP mobiles were the best for overclocking, so have I simply reached the limit of this chip (at 1.825v)?

[athlon3400]

Mine gets very unstable at anything above 50 degree's. So I would say thats your problem. Get some better cooling.

As for your PSU those are fine, as long as they're within 10% they're usually fine, I've had mine go way under and still havn't experienced a problem, but of course it isn't good for your components.

Also, what kind of ram are you using? Is it PC3200 or better?

[meatfestival]

Yeah, Crucial PC3200

[ati_azn]

Processor Temperature : 49.5 °C
Mainboard Temperature : 43 °C
Power/Aux Temperature : 127.5 °C
Hard Disk Temperature #1 : 35 °C
Hard Disk Temperature WDC WD800JB-00FMA0 13.03G13 : 32 °C

this is with my side panel open and just browsing and chatting. if i close it and play games i notice it reaches up to 60 or so. btw thanks for the advice on my sig i forgot about it
whatsthe voltage your running on the cpu? seems about right since my craptastic goes over 70 full load (before when i pushed it to 1.75+ Vs). just dont let go past 65'c and your good. if it does look for a better colling solution or lower the clock and voltages.

[meatfestival]

Mine gets very unstable at anything above 50 degree's. So I would say thats your problem. Get some better cooling.

As for your PSU those are fine, as long as they're within 10% they're usually fine, I've had mine go way under and still havn't experienced a problem, but of course it isn't good for your components.


OK, well, I just installed a Thermalright SI-97 and an extra case fan... temps are now down to about 45c under load. CPU diode temp is usually only about 1 degree higher... and the stability problems are gone. But I still can't get it to go over 2.3GHz, even with vcore at max.

So it looks like the best I can do is prime95/superpi stable at 2.3GHz with 1.775 vcore. Got a blue screen at 1.750v.

[joethemole]

OK, well, I just installed a Thermalright SI-97 and an extra case fan... temps are now down to about 45c under load. CPU diode temp is usually only about 1 degree higher... and the stability problems are gone. But I still can't get it to go over 2.3GHz, even with vcore at max.

So it looks like the best I can do is prime95/superpi stable at 2.3GHz with 1.775 vcore. Got a blue screen at 1.750v.

wow i guess i have a pretty good chip then. mine is prime stable at 2.22ghz at 1.600vcore at 50c idle, high 50s to low 60s full load after a few hours. this is a silent rig, so my oc is limited by temps.

[mwarps]

OK, well, I just installed a Thermalright SI-97 and an extra case fan... temps are now down to about 45c under load. CPU diode temp is usually only about 1 degree higher... and the stability problems are gone. But I still can't get it to go over 2.3GHz, even with vcore at max.

So it looks like the best I can do is prime95/superpi stable at 2.3GHz with 1.775 vcore. Got a blue screen at 1.750v.


What type of Fan is on there? 45C load seems a bit high. I've been at 2.5/1.8V under an si97 with a 92mm H1A at about 38C load.

[DaLurker]

What type of Fan is on there? 45C load seems a bit high. I've been at 2.5/1.8V under an si97 with a 92mm H1A at about 38C load.


45 Load is actually very normal for an AXP-M especially with increased voltage. 38 degrees load is VERY VERY low for XP's. You're into A64 territory there, and that's really cool. Don't worry about your 45 load. When you start hitting over 50 though, that's when you need to start worrying.

[mwarps]

45 Load is actually very normal for an AXP-M especially with increased voltage. 38 degrees load is VERY VERY low for XP's. You're into A64 territory there, and that's really cool. Don't worry about your 45 load. When you start hitting over 50 though, that's when you need to start worrying.

Must be a cherry chip I've got then. :D

[meatfestival]

What type of Fan is on there? 45C load seems a bit high. I've been at 2.5/1.8V under an si97 with a 92mm H1A at about 38C load.

I switched the cpu fan for a 92mm vantec tornado and changed the position of the extra case fan, and now it's usually just over 40 under load. Still won't overclock further. :(

[DaLurker]

I switched the cpu fan for a 92mm vantec tornado and changed the position of the extra case fan, and now it's usually just over 40 under load. Still won't overclock further. :(

If you want to overclock further, you'd have to up the Voltage more, but more voltage = more heat means you need better cooling.

My XP-M wouldn't do over 2.3 ghz (1.7v) Until I went water cooling. Now it does 2.5ghz @ 1.8v. I just did a volt mod, but waiting on my new pump to come in, so I'm hoping to hit 2.8ghz @ 2.0v :D

[ryuji]

my old 2600 mobile did 2.6 ghz at 1.7v 2.8 at 1.9 probably but my poor slk-800 couldnt handle it :p

[meatfestival]

If you want to overclock further, you'd have to up the Voltage more, but more voltage = more heat means you need better cooling.

My XP-M wouldn't do over 2.3 ghz (1.7v) Until I went water cooling. Now it does 2.5ghz @ 1.8v. I just did a volt mod, but waiting on my new pump to come in, so I'm hoping to hit 2.8ghz @ 2.0v :D

Max voltage for my board is 1.825v... but if I try that at 2.4ghz, it blue screens or restarts before I even get to windows. Idling at about 36C (in bios), so I don't really think it's a heat problem. I can boot into windows at about 2.35ghz, but get lots of problems. Think it's because I have to take the FSB above 200 to get that clock speed.

[DaLurker]

Max voltage for my board is 1.825v... but if I try that at 2.4ghz, it blue screens or restarts before I even get to windows. Idling at about 36C (in bios), so I don't really think it's a heat problem. I can boot into windows at about 2.35ghz, but get lots of problems. Think it's because I have to take the FSB above 200 to get that clock speed.

Just sounds like your chip can't handle the step then.

[Megadeth_Guy01]

Athlon XP Mobile 2500+ @2507MHz 1.875v (200x12.5)

Thermaltake Volcano 12 Extreme Edition @ 5500RPM's

Idle: 34C
Load: 48C

When I boot at 200x13 (2600MHz) I get to the Windows XP login screen and it crashes. Maybe more voltage, or my heatsink can't dissapate all the heat this thing puts out. I just installed the chip like 10 minutes ago so I guess I can expect to gain a few more MHz once my thermal paste sets up. Watercooling should be here soon as well so well see how high I can get then, hoping for at least 2.8-2.9GHz on water but that's prolly wishful thinking.

Edit: Added temps.

[350S10NJ]

Asus A7V rev.1.02 with XP2100+ throughbred "B" at 1.7v running 2100 mhz. KingWin-7025 copper hsf 39c.


http://home.comcast.net/~bpaulus/A7V_Speed.jpg

[ati_azn]

Asus A7V rev.1.02 with XP2100+ throughbred "B" at 1.7v running 2100 mhz. KingWin-7025 copper hsf 39c.


http://home.comcast.net/~bpaulus/A7V_Speed.jpg
wow. 3+ v?? thats insane! just a bump btw.