That is really pushing the limit of the PSU. It is hard to say one way or the other. I am running 3 HDs with a 4400+ and a 7800GTX and the SN25P runs with no problems, but I'm not sure with a bump in CPU and graphics card, if the extra power consumption will put it over the top. Hope someone...
I finally got a chance to write this up. Hope this will help everyone in building their machine :p
Shuttle SN26P User Guide
Shuttle SN26P User Guide - Live Version
Ald
Updated: 05-01-2006
* Updated format of the guide.
* Added new Q/A concerning ethernet issues.
The format of the guide was really broken for awhile, my apologies for not getting it fixed sooner =(
Ald
Hi Vlad,
How is your video card currently setup (power wise)? Are you using the Y-Splitter that came bundled with the card? I currently have a BFG 7800GTX OC in a SN25P and the way my system is hooked up right now is that I put the Y-Splitter on one of power output molex. I then connected...
Just got back from my long and extended vacation yummm... so I didn't get a chance to read some of the issues. Regarding the SATA drive, you don't need to install any sort of drivers for it. The only purpose for the nVidia IDE Driver is to get the option to enable/disable NCQ and I believe...
I would try the following:
Flash your CMOS again with the power unplugged from the computer, remove all expansion cards and devices. Boot up your computer and see if you still get a Checksum Error, if it still occurs then it means that you probably have a bad motherboard, otherwise, it could...
maxBR: I would suggest staying away XPC Tool until it is out of beta for SN25P. I wouldn't trust something that is in beta to control the crucial components (fans) which could lead to bad bad things on failure! ;)
Regarding the SATA II and information retrieval, I do not think you can find...
Updated: 10-27-2005
* Updated link for latest Nvidia Graphics Drivers.
Updated: 11-05-2005
* Updated Step 5 for new nForce chipset driver 6.70.
* Added new Q/A concerning slow boot times and error in Event Log.
* Updated Q/A concerning the new nForce chipset driver 6.70.
* Updated...
I'm not sure what fanspeed is, but have you tried speedfan? This should allow you to fine-tune the fans to a desired speed. Also, is the fan set on SmartFan within the BIOS? Have you tried another setting say... Mid - Noise? Though, I doubt this will work since it will probably just go max...
Updated: 10-15-2005
* Updated guide to reflect new VIA sound drivers 4.73b
* New Q/A that concerns performance issues in regards to X2 CPU.
Submitted final copy to SFFTech for posting as well.
Ald
Finally out of my busy schedule, I have gotten a chance to update the guide!
Updated: 10-03-2005
* Updated Step1/Step3 to reflect Disabling/Re-Enabling USB device is another option.
* Updated Step2 to reflect DirectX 9.0 compatability issues.
* Updated Step4(a,b).
* Updated link for...