Recent content by jgdiaz

WTF!!!! I have been in the service industry for 20 years and I had never had to do such idiotic thing. I would tell them to shoot me before ever having to do such a stupid dance. :eek::eek: It was stupid but funny to watch a bunch of fat asses and one so so looking girl dancing like morons...

After reading the article I am wondering if it may be possible to replace the C7 cpu on my HP2133 with the Nano? since they are pin compatible. That would be a nice upgrade.:p:D

I changed from the E6700 to the Q6600 and even though I had the E6700 running at 3.5Ghz and now the Q6600 is running at 3.0Ghz I get the same performance on FEAR and other games as I did with the E6700 @ 3.5Ghz, so I would say the quads are faster from my own experience.

Yeap, I agree that the fsb will hinder the performance with the 2.2ghz processor, but if you still want to try I know that you can get the service manual that walks you through taking the laptop apart from HP's website, I have the HP 9225us and I got the service manual from HP's website as it is...

Man I hope they fixed this cause I want to get Bioshock and I don't want to have this problem just because I am installing Bioshock, I am about ready to go and get my copy of the game in a few minutes at my local Fry's Electronics. :eek:

That is the temps you will get with the stock intel cooler, you will need a better cooler to get lower temps, I went for the big bucks cooler (Ultra Chill TEC Cooler) and temps are about 27c idle and 40c load. Here is a link to cpu speed and temps at idle. Update:I3ender - I forgot to mention...

Here is a link to my OC and Temps this is with speedfan modified to show correct temps changed the $0 on ISA setting to 15 in advanced settings, rig setup in my sig. The load temps only go to about 40c. :cool::D

I have the same case and because of the way you have to orient that cooler, I went with the Ultra Chill TEC it's expensive but works just fine and it keeps my Q6600 very cool even with a temperature of 86F in my room the processor stays very cool here is a link to a pic of my temps, I do not...

I just installed the game and it runs as smooth as butter on my sli 8800GTX rig. :D

I have 2 of these and the pcb's are green, anyway mine are being cooled by a pair of Dangeden waterblocks 48c idle and 59c load. :D

Yeah I know, my 8800GTX SLI setup is much faster than the quad SLI setup, Maybe I can sell the 7950GX2's on Ebay or on the for sale section of this forum. :o :eek:

To change the fan speed you have to use the low level settings instead of the driver level settings, below are links to pics of where to go in rivatuner. http://img516.imageshack.us/my.php?image=lowlevelsettingsnl7.jpg http://img516.imageshack.us/my.php?image=lowlevelsettings1rn8.jpg

I have always used rivatuner to overclock my 7950GX2's and to set the fan speeds, I had them running for a whole year without any problems at all, But I would never use Ntuneas it is a piece of crap. I can't think of what could be causing the one card to drop like that, it is very strange all I...

I had the same problem till sumofatguy pointed me to the low level settings in rivatuner, I have attached links to 2 pics of were you need to go and it will be the low level system settings. The second pic shows what the next screen should look like this worked for me. Good Luck...

Hey Guys, I ran the FEAR benchmark to see what my newly installed 800GTX SLI setup can do and attached is a link to a pic of the results: http://img233.imageshack.us/my.php?image=fearscore8800gtxslibv0.jpg :cool: :D