Recent content by Manoj

Here are the idle system temp reading using Everest Ultimate Edition. E6750 @ 3.6Ghz at default voltage XFX Geforce 8800 GT XXX edition (default clocks of 670mhz core and 975mhz mem) http://premium1.uploadit.org/ManojM//System-Temp-at-3.6Ghz.jpg

Yes, I fixed the eSATA problem. It works fine now.

No. It is pretty big. Just put it over the rams it will cool the chipset cooler. It is a tight fit. It is nearly impossible to get it to fit. Let me see if I can take some pictures to show you.

I think it was 40 to 50 degrees C. Let me go home and check it for you. I normally don't bother about GPU temp because mine is a XFX GEforce 8800 GT XXX edition and it is covered with 2 years warranty. If anything goes wrong I can get a new one from them. The main office for XFX is in...

I think the temps are pretty good for the case. Just remember to reverse the fans for the CPU heatsink (intake and outake). My Geforce 8800GT usually stays around 40 degrees C to 50 degrees C.

You can check out the details in the picture. http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4.1Ghz.jpg

Last test before I leave for my vacation in 6 hours. Conroe E6750 at 4.1Ghz (inside a tiny Shuttle SP35P2 Pro) http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4.1Ghz.jpg Shuttle rocks man!

Here is my latest result. Conroe E6750 @ 4Ghz (1.44V) http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4Ghz-and-DDR-II-1000-CL5.jpg Super PI passed as well. http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4Ghz-SuperPI.jpg

You are getting new ICE fans?♥ From where? Why are you going back to XP?

Yesterday I got a chance to test the overlcock potential of my newly built SP35P2 system. Conroe E6750 @ 3.8Ghz (voltage set to auto in the bios) OCZ Platnium DDRII 800 @ 950 CL4 (voltage set to 2.275 in the bios) Seagate 500GB Seagate 320GB XFX Geforce 8800 GTX XXX Edition (670mhz...

Yes, I am using the eSATA cable that came with my external hard disk case.

Can this cooler be installed in SP35P2 Pro? http://www.ocztechnology.com/images/products/accessories/t/XTC_Cooler_mbt.jpg http://www.ocztechnology.com/products/cooling_products/ocz_xtc_cooler

Do any of you guys are using the eSATA port? I can't seem to get it detected in Windows Vista. I know it is enabled by default because at system boot, it shows that it is enabled. However, I can't get it to be detected in Vista.

I got the SP35P2 Pro last week and it is excellent. I wanted to get the SX38P2 Pro but it was not out yet. I am told it should be availble early next year. I am in Hong Kong. However, seeing that the SX38P2 Pro will provide me with no real benefit over the SP35P2 Pro, I decided not to...

I am only using 2gb mem now.