Recent content by simonw

The Zotac H55 ITX has been spotted in Japan: Hopefully, it will make its way over to other countries soon.

I wouldn't mind a pic of the PSU label if possible, just to check what brand/model Antec are using.

From the manual, it states 10A on the +12V rail, so not too bad.

No, it is not fanless, it has a 80mm fan.

torr3nt - is that a Xigmatek Durin D982 cpu cooler you are using? If the answer is yes, does it fit without modding the frame?

Be Quiet have a 350W SFX PSU. The company have been building a steady reputation in Europe.

It's rumoured that J&W may be working on a 785G board, I found the below pic a few months back:

I've been thinking the same thing, it states that it will use an external power brick, but doesn't indicate whether one is included or not. So if not included, one needs to spend a bit extra on a pico psu + brick which will be an additional cost. I quite like the case actually, small and has...

Flash videos will be hardware accelerated using nvidia gpus.

It does fit, this is a pic posted from one of the forum members in an older thread:

The fan on the Geminii S is just a standard fan so can be replaced with another fan with no problems, so the 12mm thick fan will fit.

That's an interesting idea, but there could be potential cross airflow issues with the GeminII fan blowing downwards, and with the intake fan so close to it, there may be no air reaching the back of the case.

Silverstone have the NT07, which is supposed to be a little quieter and perform better than the Intel stock cooler, although only by about 3 degrees.

New case from Thermaltake called the Element Q. As far as I can tell, it's just a clone of the Apex MI-008. I guess it is ok if you want to use your existing 5.25" optical drive in a mini ITX build.

I'm guessing that an internal fan would get in the way of the optical and/or 3.5" drive cage.