Strange bird's latest activity

Defuse. This forum is quite virtuous. "The Enermax MAXPRO II series is one of Enermax’s long runner power supplies. Developed specifically for the European market, MAXPRO II is characterized by low noise and efficient operation. With 87% peak...

Good for you, have you maybe measured how much power your PC without a monitor draws from the wall, I would say no more than 400w. As for enermax, I think they only make power supplies for the EU market.

Defuse,don't get too hot, my new power supply is on its way, so I'll try 3600mhz with relaxed latencies and FCLK at 1800mhz. I will test that when I get a new power supply and when I have time, probably Sunday. I had no idea that the best memory...

first picture

Yes, I didn't say that anywhere, except that 1000w is overkill for rtx 4070 unless there is (are not) power supplies from the tier a segment of 600w and 650w. My first choice was enermax max 2 pro of 600w or 700w, but unfortunately they are not...

I think none of all, I already used Typhoon Burner, I have 2x8GB Hynix and 2x8GB Micron Memory, it's not certain B-Die ... at 3600mhz with Cl 16 is demolished, maybe work with Cl 18 from Pendragon. But 3400MHz is OK to me, and the processor now...

Well, let him buy what he wants, I'm just saying that if he won't have an rtx 4090 or 5090, then it doesn't really make sense. Not that I hold anything against him.I didn't read everything, I guess his PC works 24/7 all the time, so he wants...

Maybe yes, but I like to overclock anything. Now my ryzen 5600x draws 103w, similar to ryzen 2700x.

I breastfed with pbo around 2.5%. I'm asking you, can I set FCLK to 1800? Now it's on the auto (hw monitor reports 1664) I will overclock the memory to 3600MHz with pendragon latencies. I am interested in how to fill in the options in the bios...

I ordered msi mag a650bn for rtx 4070 super and OC ryzen 5600x. What this guy above bought a 1kwh power supply for rtx 4070 vulgaris is an absolute exaggeration. MSI MPG A850G costs 153 euros and more with me.

Now don't exaggerate, I've had all kinds of power supplies, from the worst to super flower, corsair tx 650w, which I now have again. Now, the only one that stopped working for me was some xilence, but it didn't cause anything, it just suddenly...

Not as far as I can see, I have options for amd overclocking under the advanced option in the bios menu. For PBO, I can choose auto, disable, enable and advanced. I can only change under advanced, nothing else. And what should I do with the...

then try 18-22-22-42 and 1.4v the small decrease there is worth it to get the IF to 1800. yeah youll have to look around. they should be there somewhere.

In the majority of cases, the brand you see on the outside of a PSU is not the same company that designed and built the PSU. Enermax may have made some design requests (like using their own fans inside or certain desired specs to meet a price...

I'm not an expert, but enermax is a well-known company, I have their excellent fans that have been working for 10 years and none of them have failed. Then why does enermax produce these power supplies if they damage the equipment? I just see...

Now I'm looking and FCLK is at 1664MHz. Now I set the memory to 3333MHz because it is the closest to FCLK.(1:1) I don't know what latencies to set at 3600MHz, it crashes at 3600MHz with those XMP settings (16-20-20-40). My bios is different...

PBO just enabled, nothing, I tried it, then it only boosts up to 4.6GHz at the factory. I have to set everything to advanced and then boost the processor to 4.8GHz. I raised the memory to 3400MHz with 1.4V, so now I will test it. I have infinity...

It doesn't go to 3600MHz, now it's 3200MHz at 1.35V, I can probably go a little higher, but no way at 3600MHz, I have a patriot viper steel gaming. I think I already tried it at 3600MHz and it wouldn't boot

running ryzen below 1800/3600 on IF/ram is usually the biggest perf drop, not much what you get from pbo, ignoring that your still running the bus below its optimal clock, slowing down everything that your doing on the pc..

What does IF mean to you? I have 32GB of memory, I keep it at 3200MHz, CL 16-20-20-40-75