Recent content by Texxxxx

I wouldn't but another ASUS anything. Their product support is abysmal and their techs are not very knowledgeable. Very pretty heatpipes, however...

Sry to hear that, worthIT. 1004 worked fine on mine.

That is very helpful, Drazek, to have all the info in one form to compare. Thx..hopefully more peeps will submit their settings. btw..the Dark Forces site looks cool...I'll check out the forums there later.

Thx to Nielsen in the asus forums for the link to these: [/URL][/IMG] They are from the Crosshair mb, but asus tech says they are the same codes.

Yes, the mobo temp at idle seems high to me, also. Maybe you aren't getting enough air flowing through your case. My temps are cpu 32C and mobo 28C at idle in the morning...a couple degrees higher in the afternoon. I have six 80mm case fans ( 3 sucking in {2 front, 1 side}, 3 blowing out {2...

Yes, that is it.

Not neccessarily, but turn them off and try again. It's possible that may be all that is keeping your board from posting.

My response wasn't meant to be sarcastic...it was a gentle suggestion...I think you have a bad attitude and are a mean person.

...do the math... I am running at 3.3GHz, roflcopter is at 3.2GHz and Drazek is at 3.33GHZ

-- Board Info -- Bios: 1002 Stable: yes CPU: E6600 RAM Manufacturer: Corsair pc8500c5 RAM Amount Installed: 2x 1gig -- FSB & Timings-- CPU FSB: 1467 CPU Multi: 9x DDR FSB: 800 tCL: auto (5) tRCD: auto (5) tRP: auto (5) tRAS: auto (18) CMD: auto (1T) tRRD: auto (3) tRC: auto (22) tWR: auto...

Tyson-It' a big square button on the I/O panel in back that says 'LED SW'. Out is off. It's right above the 1394 connector. Thx, worthIT!

Weird..I never tried the 0901, but with the1002 I have no problems with BF 2142..played it yesterday...not long, only about a half an hour in single player.

Weirdly enough, the Striker is not meant to run with the leds on. Turn them off with the button on the back and try again. Asus says that later bios...maybe like 0701 on....have it corrected so that you can run the leds when the comp is actually running, doesn't work that way on mine, however.

1002 here: ftp://ftp.asus.com/pub/ASUS/mb/socket775/Stricker%20Extreme/1002.zip

1002 here: ftp://ftp.asus.com/pub/ASUS/mb/socket775/Stricker%20Extreme/1002.zip haven't tried it yet, myself....