Recent content by Webox

  1. W

    GIGABYTE P67A-UD4 Motherboard Review @ [H]

    Just installed the new F6 on our UD3P board. Smokes!
  2. W

    RAM Problems? Cooling too Tight?

    Hey Kyle, Did you try the different slots....add another stick? Got a Gigabyte UD2 running at 4GB &1600 with all 8GB or 6GB here! Default settings and F4g Bios The EX58 would not run 12GB at 1600 though, so dumped it,,,,still will not. Lots of luck.
  3. W

    Why Do You Need More Than 6GB of Memory?

    Running 12GB of 1600 here with Titan SSD. Cannot get the memory above 1200 though. Disabled the page file. Been running very smooth at 4.0GB for some months. Love it!!
  4. W

    Core i7 Overclock Issue

    Koden The new bios is letting me run at 3.8 with all 12GB so far. Cannot run the memory above 1200 yet. Can get to 4Ghz but still unstable. Settings are 19X 200FSB 1200 Mem....stable so far. Deleted the Page file (<'; Working here jb
  5. W

    Core i7 Overclock Issue

    Hey Koden, Guess we are the only ones in the [H]ard Kingdome with this issue. Found a new bios to try. They have a F7d if you haven't tried it. Here: http://forums.tweaktown.com/f69/gigabyte-latest-bios-28441/ Question:Were you getting more than 1200 on the memory at any time? jb
  6. W

    Core i7 Overclock Issue

    "Both sets of 6GB memory test 0 errors running at 4.0 GB." Should read 4Ghz
  7. W

    Core i7 Overclock Issue

    Both sets of 6GB memory test 0 errors running at 4.0 GB. Looks like there may be an issue with the Motherboard. Cheers jb
  8. W

    Core i7 Overclock Issue

    Hi Mike, That is more like it, thanks a bunch. Think it is the sticks....regardless of the settings in the bios we keep hitting a brick wall at 150 FSB jb
  9. W

    Core i7 Overclock Issue

    With the mirade of settings in the Bios there must be a reason for putting all them in there. It is too much of a difference between 4.0 & 3.0 Speed we think. Thanks for the advice guy's Still working here (<: jimbob
  10. W

    Core i7 Overclock Issue

    Guess it's back to square 1. Thanks for all the advice. Working here. jb
  11. W

    Core i7 Overclock Issue

    Anyone know where we can find some of these? Thanks
  12. W

    Core i7 Overclock Issue

    Thanks forr the heads up on this Xenozx. Did not think it would be near that much of a difference! Cheers jb
  13. W

    Core i7 Overclock Issue

    Using two separate sets 6GB of PC1600 system will clock easily to 3.8 Ghz. Both sets run fine at 1600 When we install all 12 GB the best is 3.0 Ghz. problems above 1200 Nothing seems to help in the settings.:( System: Silverstone 700 PS Gigabyte x58-UD5 Bios F4 & F5 2x OCZ PC 1600 6GB...
  14. W

    GIGABYTE GA-EX58-UD3R: A Solid Buy?

    Thank you Tobit. It would seem with this you can also populate all 4 and run in unrestricted 3 Chanel mode, maybe. "When memory modules of different capacity and chips are installed, a message which says memory is operating in Flex Memory Mode will appear during the POST. Intel Flex Memory...
  15. W

    GIGABYTE GA-EX58-UD3R: A Solid Buy?

    Now I am really confused! 3 Chanel with 4 slots filled don't compute for me. I wold have guessed 4 slots full could only be dual not Tri. Lost here!!
See more
Back
Top