Recent content by wjg

I am getting static in my headphones only when I play games. Otherwise, sound to speakers is fine, or if I play music through my headphones, the sound is fine. I get the static when the games is being run, even if I have sound muted (and have sound disabled on the game) The problem only...

Hello. I have a question about a HD 4830. You posted to someone about connecting addition power to the card. My card seems to randomly stop output, and the fan goes to 100%. ATI tray Tools loogs an instant temp spike to 511C. And the LED witht he D1601 OVERTEMP PROTECT is lit. Any...

EDIT - I had ATI tray tools installed, and it logs the temp readings (I wish it did the clocks though) And this is what I got - Also observed a single red LED light on the card with the words "D1601 Overtemp Protect" written on the board near the LED" Is this a card problem or a PSU...

I found such material but it was not in any response to me, and was no where to be found in the FAQ. If that was a trusted solution, then it should have been in the FAQ and noted in the download page. But it was not, and I had no reason to believe it was a final solution (and its not really)...

The problem with the Folding at Home community - especially in the forums and the peopel that the Lab rely on, is that they are jerks. They just assume you know how to install two simultaneous clients. They just assume someone is willing to, without suggestion, find ole driver, download them...

My issue prompted someone to change the FAQ that Cataylst 9.3 drivers are not supported. I am glad they tested that :rolleyes:

I believe I am having problems with my VGA cabling. My original setup involved a thick VGA cable (without the cylindrical ferrites on them) running to a VGA input switch. The other input to the switch is a game console. Then the switch feeds my monitor. This setup has worked fine with a...

I spent a copuple of hours on this. If its such an impossible task to have a client to install, and run - I am not going to bother with thr gpu client. Its clear F@H hasn't put any effort into testing it, and ATI did their part a year ago and stopped.

I tried doing that with the amdcalcl.dll and amdcalrt.dll files and it didn't help. I also created a shortcut to the install file, that started in the application and setting folder that way one would for running multiple cpu client and I get the same issue.

I haven't run a gpu client before. Installed a new HD4830 card, with 9.3 drivers. Virus software off, and no cpu clients running - I get this: All my searches involved driver issue problems, but the solution - is always a different set of drivers. I will not hunt down, uninstall...

I learned just now I have been wrong. I learned the Gigabyte BIOS is wrong. It is reading the northbridge temperature as the CPU temperature. I just downloaded Speedfan and it gives Temp3 as low, and Core0 and Core1 as the core temps for the CPU. Someone explained this to me in another...

I have the same processor, and same motherboard, also using the stock heat sink, but with 4 GB ram. I was running the FAH client, the 6.23 client (not the SMP) and for some reason, it had both cores at 100%. The temperature as read by the PC Health Monitor int he EasyTune Pro 5 software that...

Thanks for replies. I am using a e5200 Dual Core (essentially a Core 2 Duo). I am using the uniprocessor version 6.23, I did not download the SMP client. It is a new computer system I built, and so far, this is the highest load the computer ever got. My first WU I forgot to mention ended...

I am using Folding at Home. And some recent work shows the CPU load constantly switching from one core to another. The first WU I did had both cores at full load, now it seems this WU switches the load every 20 seconds or so.