Search results

Up for sale are a pair of Beyerdynamic DT 990 250 ohm. I prefer to use speakers or earphones so these cans have not seen much use. Comes from a non-smoking/non-vaping environment. Will be shipped with the carrying case. I apologize in advance for the low-quality pictures. Asking $115 shipped...

SOLD: i7 920 D0 FPO Batch 3945A824 Processor ran almost exclusively at stock speed, but it easily reached a very stable 4.0GHz on a test OC run. SOLD Feel free to PM me if you have any questions or would like to make an offer. h|tman

Processor ran almost exclusively at stock speed, but I was able to achieve a very stable 4.0GHz on a test OC run. Will entertain offers. UPDATE: Sold the motherboard and H60. i7 920 D0 FPO Batch 3945A824 Manufacturer's Specs UPDATE: Asking $50 shipped. ASUS P6T Deluxe - SOLD Corsair H60 -...

For sale are the following: SOLD Audio-Technica ATH-AD700 XBox Controller for Windows Corsair 6GB (3 x 2GB) DDR3 1600MHz, 8-8-8-24 Corsair TX650v2 WD 1TB Caviar Green Will entertain offers. Feel free to PM me if you have any questions or would like to see additional pictures.

I recently acquired a Denon AVR-3805. I am not an A/V expert by any means and I feel way over my head. I'm trying to output from my Xonar STX to the receiver using an SPDIF/Toslink cable. I ran the cable from the sound card to a connector labeled OPT-1 IN on the back of the receiver. I enabled...

For sale is a brand new Antec CP-1000. The box has been opened only to inspect the contents. The unit has never been powered on. Asking for $140 shipped OBO. Antec's Specifications It should be noted that this power supply is designed to fit EXCLUSIVELY in the following Antec chassis'...

Looking to buy 2TB or 3TB internals. Drives must have warranty remaining. Please PM me if you would like to work something out. h|tman

The shrink wrapping on the back of the box is slightly torn from moving it a couple of times, but the box has never been opened. Phone pics, for now. I should be able to take some better photos tomorrow. Link to the product on newegg...

Hey guys, I built a new system over the summer and initially bought this power supply. However, I did not notice that it was built specifically for Antec cases until it arrived at my door. At the time, I was very busy with a new job and failed to return the unit to newegg within 30 days. It's...

I didn't know where else to post this, so I figured I'd start here. My neighbor asked me to take a look at one of her computers (an older Dell). She claims she wasn't able to connect to the internet, so I check out her network connections and, sure enough, the ethernet adapter was disabled. I...

So, I bought my HD485's a little over a year ago, and I really love them! I recently bought an X-Fi, and now they really shine. A friend recently expressed interest in buying them from me, so I figured I might as well sell them and go with something slightly better. I want to keep it around...

I've had the Z5500's for about two years now - and I love them! I take them back and forth between home and school a couple of times a year. A week ago, I unhooked them, boxed them up and put them in my trunk. Nothing was on top of the sub or speakers, and all of my other stuff was crammed into...

To put it simply, would it be worth it to jump from my Audigy 2ZS to the X-Fi Xtreme Gamer? I listen to a lot of music, and I do some gaming during the semester, as well. I have a pair of Sennheiser HD485's as well as Logitech Z-5500's for when I feel like pissing my roommates off. Not the best...

For my group speech class, we were presented with a problem that an actual company has experienced: one of the company's employees allowed an offensive email to leak to one of the company's clients (i'm assuming this was sent accidentally). The company wants to make sure that this never happens...

I've been searching around these forums, and I haven't really found anything regarding options for HDTV tuners for OTA signals. I'm just looking for something to watch a few football games or my favorite shows on FOX/NBC in HD. I already have Hauppauge PVR-150 for analog, and I'm just looking...

So, turns out I'm in the market for a new case. I'm looking for 120mm fans and good airflow in an all-around solid case. So far, this is what I've been looking at: 1. Gigabyte 3D Aurora 2. Lian-Li PC-7B 3. Thermaltake Tsunami As of now, I'm leaning towards the Lian-Li because it...

I use my 320GB WD320JD as a storage drive, and I've only had it since August. About a month ago, I was opening a video file and the computer suddenly froze up. I restarted a few times, with no luck. It would freeze at the Windows XP loading screen. I finally got the computer to boot, by some...

I have a Sony DSC-S85 that I bought around three or four years ago... expensive camera at the time. It has 4.2MP effective resolution and 3x optical zoom. I've been getting more into photography lately, so I decided to check out some lens on ebay for it. I found this package on ebay from...

I recently set up a home network/workgroup in an effort to transfer all necessary files to my brothers computer, which has just been reformatted. I ran the network setup wizard on both computers, mine first, with the workgroup name "Mshome". Both machines are running Windows XP Home, with NOD32...

One day, my brother told me that his computer (the AMD rig in my signature) would not power up. I tried troubleshooting it for a while, and the thing would just not turn on. I used a power supply tester and the power supply checked out, and I tried the RAM in my Intel rig, so I RMA'd the...

I am in the process of building a new system. I ordered a pre-tested, pre-build combo from Monarch (hoping that it would save me the headache I have now) consisting of an A8N-SLI Deluxe, A64 3700+ San Diego, and 2GB (1 x 2GB) Patriot PC-3200. I also have an X850XT Platinum, Audigy2ZS, 36GB...

I'm heading off to college in a month, and I'm building a new gaming system to replace the P4 rig in my signature (which my dad will use). I'm already working on a project case, and I'm taking the hard drives out of my Intel machine. I have about $2000 to work with, and this is what I've come up...

Well, I'm heading off to college in about 5 weeks, and it's definately time for a new system. Right now, I'm using the P4 rig in my signature, which my dad will use once I build mine. I'm taking the hard drives from my current computer. My new build will be a gaming and multimedia machine. I...

My new project will be ready for paint soon, and I've been wondering about different paint options. I want a very durable, glossy finish, and I'm just not sure I can get that with most spray paints. I went to a local NAPA/auto paint distributor, and they can custom mix a quart of paint for me...

This is the beginning of my second mod, and my first worklog on [H]ardforum. Say hello to Project: Thriced. This mod will be centered around Thrice - one of my favorite bands - and their logo. I prefer a clean, sleek look, so there won't be anything over the top with this project. My main focus...

The case I ordered from dealsonic for my next project has just arrived, and I have all of my plans laid out already. After painting the case the color that I want, I want to paint this logo, in white, on the back panel, and two of the drive bays, but I'm not really sure what the best way to do...

I have a new mod competely planned out, from the case I'm going to work on, to vinyl graphics and color scheme. One thing that is driving me insane, however, is choosing the right type of paint for a job. I've done a lot of looking around online, and in hardware, auto shop, and paint stores. The...

My system has been acting up lately... and it's driving me insane. It's become sluggish and unresponsive - it often takes me a few clicks to get anything to respond, but other times it is normal (not often, and not for long). I'm running Windows XP SP1, all critical updates, Zone Alarm & NOD32...

A very good friend of mine talked to me recently, and he needs a new computer - one that will last him next year in college. Opting to go with a desktop, he asked me to build him one. His dad OK'ed it, and he will probably want to build it soon. The budget is set to $2000, I believe, including...

I had a friend of mine approached me the other day and asked me to build him a computer, within a budget of around $800-900. He's in need of an upgrade badly, and this rig is probably going to be used for gaming and multimedia. Here's what I pieced together from newegg: Case: X-Dreamer II -...

Do longer IDE cables have less data integrity than shorter cables? As in, would a 36" cable be more prone to data corruption or just less reliable than say, an 18" cable? I was just wondering, since longer cables would make wiring any case a bit easier.

Well, I'm new to the HTPC scene. I'm not looking to build an HTPC at the moment, but I want a solid TV-tuner for my system. I'm looking for whatever is best in terms of image quality and versatility. I've been looking around, and all of these software/versions/bundles are making my head spin...

Well, I have both volumes of Family Guy on DVD (best cartoon ever, hands down). I'm sick of swapping discs since there are so many, so I would like to rip both volumes, by episode, into separate video files onto my hard drive. Does anyone know of any dvd-ripping programs that would help me out...

While my brother's computer was down (it's being rebuilt now), I took the liberty of painting his case - you standard chieftec dragon. I realized that I never used the fan bracket (one of those purple ones) or a fan for the 3.5" bays, and now that I am rebuilding his computer, I want to have his...

For about a month, my brother's computer kept on restarting, most of the times randomly, other times when he tried to start a game. I thought maybe things were overheating, so I removed the heatsink, cleaned it, and applied some Arctic Silver 5. I also used a power supply tester to rule out that...

First off, let me just apologize for creating yet another Doom 3 thread, but I wanted to share what I thought of all aspects of the game, and hear your thoughts. I beat the game earlier today, on Veteran difficulty, running at 1024x768, High Detail, no AA/AF; everything looked incredible and was...

One of my good friends called me yesterday and asked me to build him a computer, and he has $700 to work with. Trust me, he badly needs this computer - right now he's using an old Duron machine. Based on what we've discussed in the past, he wants an all-purpose, multimedia machine capable of...

It's been a few months or so since I finally got my P4 rig (see sig) up and running, and everything was running smoothly up until so far. The problem is, both of my Lite-On burners refuse to burn audio CDs correctly. They burn data CD's just fine, but if I try to play audio CD's on any...