Search results

bumpy

Those are too new and probably way too long for the antec super lanboy it’ll be going into

buuuuuuuuuuuuuump

hey everyone, doing a UT2k4 retro build and would like to get some matching PCIe 6800 (gs, gt, ultra, xt, w/e) preferably 256mb models, but whatever works also looking for a 1 spaced SLI bridge. these are going onto a DFI LanParty DF4 SLI-DR so there's only one spot between the 2 x16 slots...

it would be fun to have an "Ultra" variant of this card

those NV Silencers were critical for nvidia cards starting with the 5000 series.

sounds like electronic interference. a few ways to fix this. 1) if you are using a sound card, try switching to the onboard audio of your motherboard. 2) if you are using onboard audio, try installing a sound card. 3) get a USB microphone/headset option 3 is your best bet

FYI just because you are using a piece of hardware does not mean you are using hardware RAID. This card is still using software RAID, which is fine because most affordable RAID cards do. Also it says it supports Windows Server 2012, however a lot of the newegg reviews say it does not work as a...

That sucks, I have an ageia pci card and plan on building an xp box, hopefully that will make it easy

i found it on Chip.de but it was hidden behind a wrapped up installer, so i extracted it out from that for you. hope this is the right software: Meet Google Drive – One place for all your files

op said they wanted to play the old PPU games like mirrors edge. so modern games are not a factor.

sorry when i said "latest PhysX Drivers" i meant that the guide shows you how to enable the PPU with the right drivers that support it. here is the direct link to the instructions since it is apparently hard to click on or something: How to restore PPU support with latest Nvidia Drivers and yes...

you didn't read the whole wiki page then, directly under the video is this line: However, if you're still interested in installing Ageia PhysX card (to play old PPU PhysX games, for example) into your system, you can refer to this guide, that will allow you to use Ageia PPU with latest PhysX...

here is some info: Ageia PhysX PPU - PhysX Wiki bottom line: you may as well get a low end nVidia card to run concurrently with your AMD setup and delegate it to process the physx. this is what i did with borderlands 2, i had a crossfire 6950 setup with an nvidia GT430 as physx card.

if you want you can PM me and i can share the eBay link of where i got my 2670s, they are sitting at $74 ea with free shipping right now, full retail CPUs. good luck!

That's engineering sample, they removed support for those when the retail comes out. What e5 cpu will you be using? If it's retail then you will be fine. The bios I'm using is 4901

these rampage boards support the v1's, depending on how old the board is, you'd want to have him update the bios first, but i have a Rampage IV Gene (same board specs just mATX) and am running an e5-2670v1 in it right now. the asus site even lists the v2's for my board are supported but not the...

ASRock x58 Xtreme6 fits your bill, i still have one as it was my main rig for a couple years. it is hard to come by though :D ASRock X58 EXTREME6 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard - Newegg.com

can you turn off the flash on your camera and any other lights and take a pick of the xbox live sign lit up?

like dis one: http://www.ebay.com/itm/Link-Cable-Connector-for-Sega-32X-to-Genesis-II-and-III-System-/191382971527

right, if you have component cables for the xbox, then that would work

*of

swapping sd cards is as easy as copying data from current sd card to your computer, then copying those files to new sd card and popping that sd card to the 3ds. as far as the original question, if you never tied that 3ds to an account, the game can travel with the 3ds, but if you put an NNID...

the hd adapter just gave you component and optical audio out as well as stereo audio. it did not give you hdmi. op will need some sort of converter box to get to hdmi

just be sure to buy age appropriate games, otherwise your kids might be hearing some unsavory language over the xbox live. i voted for wii u though, super mario 3d world, mario kart 8, smash and skylanders has been in HEAVY rotation with my 6 and 4 year olds since the 25th

༼ つ ◕_◕ ༽つ BUMP

https://www.youtube.com/watch?v=FwtZf1jQJH0&app=desktop

pop it out and flip it over

too bad you didn't have a double cannon arm samus :)

right, but it is at a solid 60 frames.

nintendo has gameplay, gameplay over graphics!

so Wii U has some of the highest rated and most fun exclusive games. didn't see any nintendo mentioned yet, so just sayin.

you won't find hardware on the eShop ;) here is one at gamestop: http://www.gamestop.com/wii/accessories/wii-lan-adapter/102935 here is one at amazon: http://www.amazon.com/Nintendo-Wii-USB-Enabled-Lan-Adapter/dp/B000WY8GW8 note they are not nintendo brand as nintendo has not made their...

what's with you and not showing proper respect? capitalize that [H]. also, what's with you and not finishing a quotation? here, you dropped this: "

depends on your ping, drop them ms to get better online experience.

you keep using that word... :P

forgot to mention, GameCube controller is #1 ever, then duke

it'll be a LEGO game

so with the new smash, it'll give you tips on the loading screen... BUT it also has a section you can go to and view ALL of the tips from the loading screens. more games need to do this :)

i liked that i could put my thumb right in the middle of all the buttons and not really move my thumb around everywhere to push each button, less cramping yo