Search results

I would think that working from home could hurt the teams productivity as it impacts interaction between colleagues and hurts collaboration/knowledge sharing. Maybe BBs definition/measurement of productivity was wrong.

Long time ago I decided to stop caring about the Halo franchise. Someone else more creative can have my money...

They jacked the price up to 215. For the non window one. So the deal is now up to 155...

Running two 6950s 2gb (flashed with 6970 bios) in cfx gets me 15~30 fps in boston. When I turn off cfx and run a single gpu I get ~40-45 fps... I just re-installed newest drivers and CAP profiles and I get the same results...

I know I am going to get flamed but I kinda like the new ui. I haven't been using the start menu that much since win 7. I switched to pinning the most frequent stuff and keyboard shortcuts for the rest. Also there is a bit of a learning curve. I can see how people are frustrated though...

Hmm, this does not seem like a good deal. I hopped that they would be significantly cheaper. I would still go for a filko TKL or a leopold. Hell you can get a key cool (probably) similar build quality as the mono price one for about 65 bucks... Although its a thing of preference I would...

I have the Onkyo TX-NR509 receiver. Unfortunately it only does 5.1 surround. The sound is still good and with my BIC F12 it shares the room during some scenes. I did some messing about with the Audyssey EQ and it produced ok results. I am however liking more the manual configuration...

They are all from ikea. Against the wall are m2x VIKA BYSKE tabletops & VIKA KAJ legs. In the middle is a black VIKA AMON tabletop.

Thanks, I am not a huge fan of projectors. The TV that is on there was free (51' Plazma). It is not the greatest but it will do fine for a bit. I do plan to replace it with a bigger/nicer one down the road.

Reserved for WIP pics.

Ok, so feeling inspired with the couple of man cave posts I'we seen I wanted to share the current status of my new office project. About two weeks ago we finally finished our basement remodel. It went from bare bones block to finished space in about 3 weeks. The Office Desks. The room is...

Zip ties and duct tape.

Not much of an update. Our basement is being finished so I had to focus on the prep work for that. Also, I had my foot surgery about a week and a half ago. I am recovering fine but I will not be able to put any weight on that foot for another three weeks. It will be at least another month...

Thanks for the encouraging replies guys. I got the bender from amazon the company that makes it is called FTM, Inc. Cmadki, I completely agree. I was looking for something smaller than 1'' but I came up empty handed. The goal was to try something, fail a lot and learn a ton. I am going...

Based on comments from the peeps on GH. Crappy Cherry MY switches = no good for typing Lasered Keys = Not as good for key harvesting. It would have been ok if they were double shot. Hope this helps.

Day Two. Hi Everyone! Its been a long week. I have a pretty decent size update for you guys. First thing I tried to do is cut the plexiglass sheets. I used my jigsaw and a fine tooth blade for the cuts. And the other one. Now to pull out the mobo for some measurements. This is pretty...

Ok, I know I will get flamed for this. That case looks nothing special to me. Can't you just get two Antec 300s (depending on what is on sale that week, MC has it for $49.99 bucks right now and I remember buying one for ~$35 AR) and join them together. I guess depending on how ambitious you...

Oh almost forgot. Check out what FedEx dropped off Friday...

The next item on the to-do list was to cut the tubing for the top supports. This is where I hit the my first snag as I ran out of tubing… I was about 180mm short…  Oh well I will have to order some more and work on something else till the new piece comes in. This is where...

The goal was to get the frame built tonight. Maybe start working on the slide out tray. I apologize for the crappy pictures my nice camera decided to die a couple of weeks ago and I am still looking for a replacement. Material for the frame, 1inch aluminum tubing. 3 Way Corner Connectors...

Reserved for Future Content.

Hi Everyone, I’ve been a long time lurker on these boards and I’ve wanted to get into modding/design for quite a while. I have finally reached a point where I can dedicate some time/resources to this hobby and I wanted to share what I am currently working on. Also, I have been...

Great price on the case! I must be the only one that hates ordering from NCIX. They seem to have the most retarded / customer unfriendly policies out there. Every single order I placed with them has had some problem/issue. :mad: Also, their site looks like it was designed by some...

Holy crap. Seems lenovo is going to get their pants sued off by apple. I had to do a double take since it looked like an MBP...

Well monitor sent to Hanns G customer service. I was two weeks away from an expired warranty. Has anyone dealt with their cust service?

Competition = Customers Win Good to see the green team striking back. Also, keep it coming red! Lets see what they can pull out in 3-4 months.

http://www.newegg.com/Product/Product.aspx?Item=N82E16822148433&nm_mc=EMC-IGNEFL051510&cm_mmc=EMC-IGNEFL051510-_-EMC-051510-Index-_-HardDrives-_-22148433-L0A Apply code EMCYSZS22 for $10 off.

http://www.coolermaster-usa.com/landing/hafx/home.php Any pics of this new case?

Does it mean this is the final design? It looks like a mock up used to test the internals. Then again we may never know. The biggest question is how the employee got to take the phone out of Cupertino. I kind of feel bad for the guy. Talk about a Career Ending Move...

Back 120mm (comes with case) Front one 140 (comes with case) Bottom 2x 140 Top 2x 140 or 2x120 (one 140mm comes w/advanced case)

Nothing?

Can someone help me out on how to switch my from IDE to AHCI in my mobo bios? I recently installed OCZ Agility 60GB SSD and reading up on the OCZ support forums it suggested that I should perform the switch...

Does Sapphire require the card owners to register in order to get the warranty? I know EVGA and XFX require owners to register in order to get a warranty. Any idea about Sapphire? Their site does not mention it.

The bottom 4 HDD cages are removable. You take the trays out and unscrew the cages. At least on the 690 II Advanced.

I hear you on the lack of black mobos. The closest I got is with my MSI p55-gd65. It's dark brown but looks black under the blue light in the case.

Rings up as 69.99 in Columbus OH.

Does 3 pin vs 4 pin matter? Would I just plug it into the 3 pin mobo fan connector. I have a stock fan but would not mind replacing it.

Dam I will have to check out target. Anyone know if you can pull out the Hd out of the enclosure. Use the drive and enclosure separately?

First of all, if you are complaining that they charge sales tax in your state. Go vote, call your representative. It's not their fault that your state government enacted a law that requires them to charge you tax. Or the other option is for you to move. However, it does seem that the Egg...

I have a copy of Vista Ultimate (64bit) that I am currently using. The closest I have to Win 7 is the last RC they had out. I may just pickup a copy of Win 7 OEM.