380x on 16.3 cause its the only version that even halfway works properly
i'm just sick of the "oh we acknowledge the issue but haven't done anything to fix it" that we've been getting for the better part of a year now
I have a cheap 3.5mm microphone connected to my onboard (Asrock z68 extreme 3 gen 3) Within about the last 2 weeks I keep getting an issue that its telling me the mic is disconnected from the rear port or something is plugged into the front panel, which neither have happened. To fix the issue...
I've had similar temps with the stock fan, my primary concerns with upgrading were limiting dust buildup on the heatsink and noise. Looks like I'm going to copy your setup since it seems to be the best value.
Thanks guys.
its an i5 2500k @ 3.8, the cooling isn't the major concern, the buildup of dust was what made me consider static pressure fans. The stock fan with the 212+ is relatively loud at full speed as well but thats only a problem in the summer.
I've got filters on the front, vacuum them out about once every 2 weeks. I've got positive pressure in the case as well. The sp120 performance fans seem too loud, would prefer the quiet ones unless there's another alternative. I could get a push/pull config for the same price as one of the...
I'm looking to replace the stock fan on my hyper 212+ but have heard a lot of conflicting opinions as to which route to go. My house is dusty so I'm leaning towards high static pressure fans, sp120's in push/pull. Are there any better alternatives or is push/pull a waste on this hsf?
From what I've seen digging up reviews and watching some vids they are very comparable, either is a great choice. If for some reason the Noiseblocker wasn't going to fit on the 212 I was just going to get an NF12 instead.
Looking to replace the stock fan on my 212 and was considering the Noiseblocker eLoop but the shape was leaving me with some concerns about the wire mounting system it uses.
This is exactly the problem I'm having now. Tried switching from usb2 to 3 and it hasn't fixed the issue. I have to restart to get them to work and it seems to happen randomly. I would assume if the usb controller has died they would just stop working altogether. Not sure what to do next...
Been having this issue as well. Happened a few months ago and it stopped but now its starting in again. Best course of action is just to get a new mouse or is it somehow related to the software or usb?
I would have preferred a hard copy as well but the only way to get the package deal is through digital distribution. I'm not against it seeing as how I have a lot of purchases through steam, I just wanted to make sure Stardock was reputable and would be around for a while.
Any opinions on this game? Looking for something new that isn't an fps. They have a new bundle package that includes the gold edition and their latest/last expansion for 60 dollars, only downside is its digital distribution only. I've never used Stardock so curious with any information about...
I'm looking to get some different ear pads for my hd485's as I believe the current fabric ones are giving me a rash. I'm not sure if velour would make a difference or if the pads would fit this set. If you guys could point me in the direction of where to find replacements or another idea on...
The people who are having trouble aren't complaining about needing 75 frames pegged, even a consistant 30 would be nice. The problem starts when you move around the city, the framerate drops well below 5. Even when just staying in one area it fluctuates badly. Its mainly an ATI problem but...
It has something to do with ATI cards, specifically drivers, older ones (early 6) work fine and I've heard some 3rd party tweaked drivers work as well. Software mode works better but the game looks like shit
I just started playing again but i'm using the demeter and hades mods. Good game just a little stingy on the loot and xp imo. I had the same problem as beast, couldn't just sit down and play a little bit and get the same rewards you could like in Diablo 2.
I have the z-560's and i'm considering buying the sennheiser hd 485's. My question though is should I connect them directly to the sound card or through the speaker control module?
Have a question about changing the memory divider for the m2n-e. I'm following this guide to overclock but it says change the divider to 1:2. I've lowered the ram from ddr800 to ddr400 but in cpu-z it shows up as cpu/12. I guess i'm doing this wrong but I can't find any other options to change...
Alright, I've got the latest BIOS, my onboard lan finally works now :D Gonna try to overclock and see what happens, mind if I pm you with any further questions? Thanks again.