Search results

Defuse. This forum is quite virtuous. "The Enermax MAXPRO II series is one of Enermax’s long runner power supplies. Developed specifically for the European market, MAXPRO II is characterized by low noise and efficient operation. With 87% peak efficiency (80 PLUS® 230V EU certified) and a standby...

Good for you, have you maybe measured how much power your PC without a monitor draws from the wall, I would say no more than 400w. As for enermax, I think they only make power supplies for the EU market.

Defuse,don't get too hot, my new power supply is on its way, so I'll try 3600mhz with relaxed latencies and FCLK at 1800mhz. I will test that when I get a new power supply and when I have time, probably Sunday. I had no idea that the best memory for ryzen 5600x is 3600mhz and cl16, they are rare...

first picture

Yes, I didn't say that anywhere, except that 1000w is overkill for rtx 4070 unless there is (are not) power supplies from the tier a segment of 600w and 650w. My first choice was enermax max 2 pro of 600w or 700w, but unfortunately they are not available and everything from tier a and b is very...

I think none of all, I already used Typhoon Burner, I have 2x8GB Hynix and 2x8GB Micron Memory, it's not certain B-Die ... at 3600mhz with Cl 16 is demolished, maybe work with Cl 18 from Pendragon. But 3400MHz is OK to me, and the processor now goes up to 4850mhz, I thought Ryzen 5600x factory...

Well, let him buy what he wants, I'm just saying that if he won't have an rtx 4090 or 5090, then it doesn't really make sense. Not that I hold anything against him.I didn't read everything, I guess his PC works 24/7 all the time, so he wants everything to be 100% uninterrupted and reliable.

Maybe yes, but I like to overclock anything. Now my ryzen 5600x draws 103w, similar to ryzen 2700x.

I breastfed with pbo around 2.5%. I'm asking you, can I set FCLK to 1800? Now it's on the auto (hw monitor reports 1664) I will overclock the memory to 3600MHz with pendragon latencies. I am interested in how to fill in the options in the bios, not how much I will get with the imaginary board...

I ordered msi mag a650bn for rtx 4070 super and OC ryzen 5600x. What this guy above bought a 1kwh power supply for rtx 4070 vulgaris is an absolute exaggeration. MSI MPG A850G costs 153 euros and more with me.

Now don't exaggerate, I've had all kinds of power supplies, from the worst to super flower, corsair tx 650w, which I now have again. Now, the only one that stopped working for me was some xilence, but it didn't cause anything, it just suddenly stopped working and that's it. I accidentally came...

Not as far as I can see, I have options for amd overclocking under the advanced option in the bios menu. For PBO, I can choose auto, disable, enable and advanced. I can only change under advanced, nothing else. And what should I do with the Infinity Fabric Frequency and Dividers option (goes...

I'm not an expert, but enermax is a well-known company, I have their excellent fans that have been working for 10 years and none of them have failed. Then why does enermax produce these power supplies if they damage the equipment? I just see that there is no logic, inside the enermax is...

Now I'm looking and FCLK is at 1664MHz. Now I set the memory to 3333MHz because it is the closest to FCLK.(1:1) I don't know what latencies to set at 3600MHz, it crashes at 3600MHz with those XMP settings (16-20-20-40). My bios is different, when I set PBO to enabled I have absolutely no other...

PBO just enabled, nothing, I tried it, then it only boosts up to 4.6GHz at the factory. I have to set everything to advanced and then boost the processor to 4.8GHz. I raised the memory to 3400MHz with 1.4V, so now I will test it. I have infinity fabric frequency and dividers on auto settings.

It doesn't go to 3600MHz, now it's 3200MHz at 1.35V, I can probably go a little higher, but no way at 3600MHz, I have a patriot viper steel gaming. I think I already tried it at 3600MHz and it wouldn't boot

What does IF mean to you? I have 32GB of memory, I keep it at 3200MHz, CL 16-20-20-40-75

I have a noctua uh-u12d, no problem with cooling 5600x, with 2700x there was a problem. I can overclock the memory above 3200MHz, but not much, so I keep it at 3200MHz. I will try to test cinebench r23 with PBO on enabled and I will set everything auto except clock overdrive to +200MHz. When I...

I just look at this list and some things are quite unclear, why should enermax max 2 pro power supplies be bypassed(tier e,to avoid), for what reason is this power supply not good? Gives 456w on 12V rail.For rtx 3060ti and similar gpu cards (which have tdp 200w) enough...

it always goes together, one cannot do without the other, as far as I know nvidia bought the main player for graphics cards in the past, something similar to how microsoft also bought some software.

well, that's how it is, they have knowledge, maybe patents and so on

thanks, that's it then, I get about 12100 or something more, without anything running in the background Single core 1590 Cinebench r23 the test lasts 10 minutes,a little longer because it does not stop when it reaches zero, but continues until it finishes with the picture to the end

pendragon, did you test it on cinebench r23, how much do you get multi so I can roughly know if it moves properly or not? If the score is not satisfactory, it means that these options do not really work for me

That's as far as I can see, fat overkill, for your configuration, a better quality power supply of 550w is enough, and to be sure, you could have taken one of 600w or 650w, and it doesn't even have to be from the tier a list, but from the tier b list,and tier c also passes.

I don't understand what exactly you want to say? Should I put PBO in the bios on enabled and not on advanced? I don't know what these offsets -19, -20, etc. mean, they go up to -30. What exactly happens when the minus is larger and what happens when it is smaller? I have to determine that...

I have to use ryzen master for per core offsets, otherwise PBO is basically Auto Overclock.How can I put an offset when I don't know what to write and how much? In my bios, under the amd overclocking option for Precision Boost Overdrive, the Advanced option was selected, and now there are other...

I realized that the ryzen 5600x goes up to 4850MHz, I used the ryzen master auto oc, so I have a few questions. What should I set for PTT? My Ryzen master had a bug, it set the number 1 for PTT... I used automatic OC and the per core option. In the end, I set a value for PTT of 105 myself...

It's cheaper than what I gave, well, I still paid for the postage. I see that it has dual bios, how do you hold it,oc or silent? I assume OC, it has copper on it and for sale. I can't use the full potential of my card because I'm on the B450 chipset (PCIe 3.0 x16) and the ryzen 5600x is a bit...

Nice card, it is logical that it should be cold and good, it is thick, 765 euros at my place and more,too much. I also tried with 900mV, the performance is slightly worse than the stock setting, but the heating and consumption are drastically lower, and the fans also spin at even lower...

bro, it depends on what you have, I have this Zotac, which is not top graphic, it also depends on the case. Who is thinking of buying these rtx 4070 super from the lower segment such as palit, gainward, inno3d, kfa2, pny, msi, zotac... for such cards (with two fans) undervolt is very useful

I played a little in msi afterburner with undervolt rtx 4070 super. Follow these instructions and that's it.Sweet spot for rtx 4070 super is 975mV. With 975mW, you get the performance of a stock card (even little higher than stock), but that's why the consumption of the card drops, as well as...

Obviously the gpu discrete segment is a secondary issue for them, the cpu works for them, the consoles are all on amd, so nothing strange, due to politics they have to pass things to nvidia. And considering that it is a new architecture and on a new process, it is to be expected that navi 48...

I received a Zotac RTX 4070 twin edge oc from Deutschland, sehr gut sehr gut... I increased most all settings in rdr2 to ultra and turned the ingame benchmark, min. fps 33, maximum 153, avg 121, that's much better than rtx 3060 12gb, which can't even do everything on ultra, it can, but then the...

A new case is out of the question, as is a new power supply, as long as it works, I have an old corsair tx 650w, it's not modular. Possibly get a new adapter if there is one at all, but I have to buy it again somewhere outside the country. I'll see what it looks like when it arrives, this...

I'm watching this video right now: https://www.youtube.com/watch?v=XHY9Ez2pWG0 Since I don't have a new power supply, I will have to use this adapter, which comes with the card, you can see in this video. However, it says in the video that the adapter must not be bent, and I have a case that...

In the end, I bought a zotac rtx 4070 super twin edge oc in a German web shop for 633.40 euros with delivery, there should be no additional fees. It should arrive next week. The cheapest rx 7900gre in my place costs 625 euros, and the rtx 4070super is still a smaller "vacuum cleaner" of...

Don't mix gaming or work, maybe they are for his work and maybe they pay off very quickly, so in the end the price doesn't even matter to him. After all, nvidia itself knows for whom and for what it makes such cards.

Anyway, it's very annoying, I know how it is. Today's graphics cards are very large, so the bigger the graphics card, the greater the chance that something will break. Well, the nvidia rtx 4070 super, it's ridiculously small,they usually all have extended coolers.

I agree, nvidia is more energy efficient, no one can say that's not true, it's also better for things outside of games, they have stronger marketing... obviously both are satisfied and that's it I like the rx 7900gre, if I managed to sell the rtx 3060 12gb (and I probably won't unless I drop the...

I didn't read everything before, but I had very big problems with the cases, my sound cards wouldn't fit,but also other components, I had a lot of cases and none of them were good for me, currently this inwin 303 is not 100% correct as far as slots for components are concerned. Most of the...