Search results

Please see IDE Driver is not intended for this platform FIX Thread. Thank you for chosing to post on the thread and I hope to hear from you soon.

Driver is not intended for this platform If you keep getting the following error message: There is a problem installing this hardware. IDE channel An error occurred during the installation of the device. Driver is not intended for this platform. then the way out is...

My SATA Drives are on it's on controler chip, and run from a SATA bus on my board.

Yes, I have also tryed updating them. All the other drives work fine.

Heres the deal. I got a spanky brand new DVD DL Burner installed into my RIG. First time round XP went to work install the drivers no problems, I even got it to burn a 4.7GB DVD in 3mins So I think COOL all is well But just when I thought it was all over. The next time I booted up XP said it...

Heres the deal. I got a spanky brand new DVD DL Burner installed into my RIG. First time round XP went to work install the drivers no problems, I even got it to burn a 4.7GB DVD in 3mins :D So I think COOL all is well :eek: But just when I thought it was all over. The next time I...

Keyboard/Mouse: Logitech MX Duo Headphones: Phillips HP250

Ever get that feeling somethings not quite right? Like you "KNOW" deep down inside that there is more to be had. Well I get that feeling everytime I hit that big gray button and hear my roommate complain from the other side of the house that he can't hear the T.V over my case fans. Maybe...

Can anyone tell me what a LM80 chip is and where it is on my mobo? (for system see bottom of post) Because for some reason it sits at -1c Which for a rig that is only air cooled this seems alittle weird to me.

Is the power pluged in at the wall? The Duo mx works without the power pluged in, the power is to just recharge the mouse. I too had this problem one day, Was just about to call tech when I saw that it had fallen out.

It's can be done. Air becomes colder if you move it fast enough. It will also become colder if it's pulled through a hole with enough force, such as using a 120mm Fan on a 80mm Blowhole. Like drag cars, they have to spray metho on the air intake because it's sucking at such a rate it...

I'm am using an Cooler Master Areo 7 (as stated in my first post :p ) I am also using the most upto date Bios. (Ver 15) I know that alot of ppl say Abit mobo's give higher readings (10-15c) But then I have a sys temp of around about 10c and am idel temp of about 25c. I don't know about...

Here's the thing, My Rig will idel at 35c at a sys temp of 21c halfload your looking at 50c, Full load high 50's sometimes it hit's 60c :confused: Is it just me or is that a bit of a jump? I'm runnning my core at 1.6 and my DDR volt at 2.8 I know it's not airflow, (6 80mm Case fans...

I myself Have had these problems. I couldn't even use overdrive with out it crashing. But I have found away to stop this. It may not work if you are running a PSU lower then 400watt. Try having your 9800XT on it's own 12v line, don't plug anything into the other molex pulgs on that...

Windows XP will allow you to run dual display with two cards if they are the same, So if you can find a PCI ver of your card you should have no troubles.

I'm looking for a 3rd party program that can give me read outs for the ATI 9800XT thermal Sensor.

I have been trying to push my rig just that little bit more but to no avail, I recently relisied that I had been running my memory under volt (2.6 instead of 2.75 but I am running it at 2.8 it's a BIOS thing) But with that said I was still running my memory at 1:1 with my CPU with a FSB of...

We have two computers in our house, but at 1am on the dot every day both CRT's start to shake unintill 6am on the dot, needless to say it gives me the shits. Anyone have any advice?

I have been having problems with these drivers for about a week or 2 where I would be playing a game and bam my rig stops dead. I tryed everything to get it to run stable, Set my CPU to stock, Changed my Memory ratio Up'ed the Voltage on my CPU, underclocked my 9800XT...Everything... :mad...

That's a really good point I'm sure, but not quite what I had in mind. :p

I don't no what all the fuss is about when it comes to Steam, I Play on it with a 56k modem and I'm getting the best pings I have ever seen for my modem ever! With a ping of about 250 I can actual play online now with out playing only to find out I died about 5sec ago. I was able to...

The trick is to also keep the Dryice cold, With in it's casing it should stay at about -5c thus staying soild and yet still giving off cool air. I still have yet to do testing as the project is still in the design stage But I'm sure I can keep the costs down. As for the H20:CO2 Levels an...

I have never been a big fan of Watercooling, Don't get me wrong. I love the Idea of have a pipe pop off a waterblock and pissing all over my 9800XT which cost me an arm and a leg! Or waking up to a FREE Antec fishtank side panel. So then I got thinking, Whats safer then Water?......GAS...

Hi all, I want to try and push it with my 2.6c I have it running at 3.2Ghz. But when I push it to 3.3Ghz at a 1:1 it will boot but hang about 5mins later But then when I try to lower to 5:4 it wont post at all I just get a long beep. I know it's not a temp issue as I can happly run @...

hmmmmm........could it be the fact you are running a 256MB Card at 128mb?

Hi, I recently reinstalled Windows XP Pro Build 2600 (Virus killed my drive) and now I get a temp of 39c idel WFT

I use a Aero 7 From Cooler Master It's alot cheaper then the Zalman But is still worth looking at. 23C System 32C Idel 38C Full load RIG: Abit IC7-MAX3 P4 2.6c HT @ 3.2 Aero 7 AS 3 + 5 80mm Case fans 1 Gb Corsair PC4000 Pro Ati Sapphire Radeon 9800XT

Problem fixed...... Went in under safe mode and reset my card Now posting 19k+ in 3dmark01 SE Still not happy with my score in 3dMark01 :mad: Thanks for all your help ppl. :D

Good Call...... thanks for Replying! LOL :D

Hmm..... I Just turned Overdrive on and ran 3dmark01 SE it was pulling 160fps in Mother Nature, I got to Poly count 1 and it stoped. I restarted my Rig booted windows and I got I screen full of lines about 30sec after I login. :eek: So as type I'm on my house mates computer :( I...

Does this sound right to you guys/girls? I get a score of 15672 in 3dmark02 SE :confused: I am running a 2.4c @ 3.2 stable (Just) :D And a 9800xt at 411/364. Any tips to see 20000+? RIG: Abit IC7-MAX3 P4 2.6c HT @ 3.2 Areo 7 + 5 80mm Case fans 1 Gb Corsair PC4000 Pro...

I have a Thermaltake 480watt Slient Purepower. It's very stable even running 4 80mm case fans, An OC 2.6c, OC 9800xt, and an Audigy 2 ZS. And with 2 more Fans in the powersupply that come with fanbus for a PCI Slot or 5inch bay. If that's not your thing then they can sense the temp and...

Could you have shorted your card out? Remember the more you OC the more juice you need, Perhaps your card got a spike from trying to pull more juice? :(

For the past week I have not been able to delete or move anything on my C:\ Drive. It keeps telling me Access is Denied And I am the have Admin rights. Also at around about the same time I can nolonger login to the Built-in Admin account. I get to the Welcome screen Hear the start up...

This is the first time I have overclocked and I feel cheated. I know that way back when a 600Mhz OC was skipping awhole CPU but I am have been left feeling like I know I can do better. I want more power! NO I NEED MORE POWER!:eek: If I try to push it any more windows boots and you go...