Search results

Im trying to get a site to site VPN goin between 2 server 2K8 boxes runnning RRAS with demand dial interfaces. The Demand dial interfaces connect to each other fine, show status as connected and routes at both end appear to be correct but i cant seem to get any traffic to cross the vpn tunnel. I...

You have a point about redundancy but honestly its probably not worth the effort of tearing up drywall; and its not like we're talking about the upper switch ports sharing a megabit connection, its gigabit. That's still a 1000 mbps/7 = 142ish mbps per port (assuming the 8th port is used to...

Im gonna agree with revenant, it sounds like your comp is trying to boot off the G1 and not finding anything so it just stops. Check your boot sequence.

Unfortunately not, i used to be all about palm and thought windows mobile was the suck, and at one point that was true. I've had a Treo 600, 650, and now have 700p but i can tell you right now im done with palm os. It's clear that access (the company that acquired palm) has no intention of...

Hi, im trying to set up a vpn server. Ive never really done it before so im really figuring it out as i go along. Its a server 2003 R2 box with 2 nics. My original intention was to connect one side to wan and the other side to my internal network. Basically there are some shares on the server...

well ive seen some pretty nice bluetooth keyboards fro the treo for around 130 bucks, not sure if reqular pda's have bluetooth though (never had one). Theres also ir keyboards and some due conect to the pda's connector. Do you already have a pda or are u looking to get one?

yeah, xp is a bitch about major harware swaps, especially mobo swaps.

falcon northwest, vodoo, um... thats all i can think of

I started playing with speed fan today to see if i could slow down this one really noisy fan i have. I started playing with the temps and ive got them all fiqured out except one. Speedfan reads 8 temp sensors, 3 from the winbond chip on my mobo (cpu, ambiant, pwm), 4 from my hdd's (S.M.A.R.T.)...

Since my comp kinda worked if i discharged all the caps i decided to leave it unpluged last night. When i got up this morning i was able to get into the bios, make all neccasery changes, then reboot into windows with no problem. At this point ive rebooted like 5 times and still no problem.

you have a few options: 1) get a moniter with an s-video in 2) get and adapter to go from s-video to analog so you conect it to your moniter 3) get a tv capture card, this is probably the best option. If your planning on geting a new grfx card then you could get an ati all-in-wonder...

yeah, my proccesor ran fine for a day idleing at 37 degrees and the xp-90 is still firmly seated in place.

You've got a lot of free time on your hands don't you. :)

im not to familiar with nvidia cards so not exactly sure how good your grfx card is but juding by your specs, it seems like the rest of your comp is bottle-necking the card and in that case ocing the card woudnt really help, if your wanna oc try to oc your proccesor.

I Got a Thermalright xp-90 yesterday since stock cooling wasent really doing as good of a job as i wanted it to. After installing, i booted into windows, my proc was idleing 12 degrees cooler and all was good. I thought what the hell ill push it a little further, i rebooted and tried to push the...

yeah, ive never been a big fan of upgrading single components, it only results in a bunch of bottle necks which = a big waste of money since you wont be using what you paid for.

lol, i havent been out of the loop that long, but serioulsy any REAL suggestions.

A few days ago my trusty 4 year old 9800 pro crapped out on me and now im on the search for a new vid card. My comp still has a few years left in it and i dont really want to do any major upgrades. My 9800 could play farcry and HL-2 on all the highest settings and i was happy with it. Basicaly...

starting to get a little pissed, after changing that setting in the bios, i was able too boot into windows. i got 4 moniters going perfectly (pluged in my tv to). i rebooted and now when i tried to boot into windows, it freezes on the windows xp loading screen. the only way i can get it to work...

SCORE...... I was messing around in the bios to see if i could find any relavent settings, and found that it was set to use pci graphics cards as the primary display driver, swithed it to agp, and boom works perfect. i guess my comp just didnt like that configuration. :rolleyes:

i tried pulling the my agp 9800pro and leaving the 7000 but it still did it and there is no way that little card is pulling more power than the 9800

i just bought a pci radeon 7000 to use a 3rd moniter i had lying around, but when i plug it in, i get the normal singal beep the a few seconds later i get a high/low looping beep code which apparently has something to do with the cpu, but when i unplug it, everything works fine. i tried...

Thanks for all the replys, I basicly told him the same thing (its a waist to upgrade just your grfx card right now). Im waiting till 07' to do a complete system overhaul. Damn, i can remember when the 9800pro was the hottest shit out. :(

Exactly what the title says. My firend is looking for an agp grfx card in the low 300 dollar range. Ive been out of the loop for a while so dont really know whats out there right now. He was looking at 6800 gt's but with his budget i know he can do a little better so any help selecting one would...

First of all this really dosent have to do with htpc's as much as it does with reqular home theater systems. I was doing a little re-wiring (just upgraded to hd setup, 1080i 65" screen, hd directv reiver/hd tivo in one, and tri-lnb oval dish + bose 5.1 surrond system) to ensure that everything...

To be exact, 100m = 328.08398950131ft :D

THANK YOU, that exactly, i also just realized that i titled this thread "cat 5 connector" and it just hit me that cat 5 is the cable not the connector. sorry but it is 1 am over here and im not thinking str8.

At one point there were several computers on the 2nd floor of my house, so instead of running several cables up to the 2nd floor, i just ran one and put in a router to split up the conection. Now i only have one computer up there and would like to use the router somewhere else. I've been looking...

Thanks, that what i thought it was but i couldent tell from the pics wheater the block was big enough

after looking around a little more i realized something, how am i supposed to mount the cpu block on my mobo, all the faqs i looked at required there to be holes right next to the cpu, on my mobo (in sig) there are no holes. the only thing i can think of is the piece of plastic that holds the...

I think it goes res>pump>rad>cpu>gpu>res, it seems to me that you would get cooler water by having a direct line between the rad and your cpu and/or gpu because id guess that the pump generates some heat so if you place it after the rad then it would slightly heat up the water. Also i was...

Well after some research i have concluded that there is no way in hell im going to get what i want for a hundred bucks. My piece-o-shit case is to small for a w/c setup so this christmas im going to ask for a lian-li pc-70 (my dream case) and a dremel, thankfully im only 15 so i still have a few...

gpu and cpu, i thought about the nb but that would just mean extra money and it dosent really run hot enough to need it, maybe in the future when the cash flow isnt that tight but right know im just going for the necessity's.

My main concern about this is price, i read the stick and it says that most good water cooling systems usually dont cost much more than a hundred bucks but the "cheap system" comes out to $160. The main reason i want a water cooling system is becasue even with air cooling i can still boil water...

samurize still requires mbm5 for fan rpms, temps, and voltages

wtf, i changed the ip address, the subnet mask, and the fu*$ing dns server and it still dosent work

come on, it cant be that complicated im just trying to figure out how to enter these: values in linux (suse 9.1)

i started playing around with knoppix a while ago and really liked it so a few days ago i installed suse 9.1, in knoppix the internet worked right when it booted up but with suse it didnt. i know it is beacsue i have to change the ip, subnet, and dns, stuff. i managed to change the ip and subnet...

did some research and found that with mui pack you can make your english version of windows run in other languages, but you cant really buy it or download it. like windows media edition, the only way to get it is if you find oem cd or if it came with your sys.