I saved a logitech wireless mouse using the alcohol method. The rubbery grips on the sides were sticky, so using a rag with alcohol took it off to the smooth plastic, and it's like new again. I've used the method on other devices since and it's worked great. All that grippy rubber compound melts...
I think there are some motherboard compatibility issues with these, and likely other NVMe drives. I posted back on #303 about slow 4k speeds when I imaged my OS drive (a Samsung 950 EVO SATA). After a couple days Windows apps wouldn't open so I switched back to the Samsung and reformatted the...
The temps at completion of testing were 47 degrees.
This is the Premium model with PCIE Gen 3x4 https://www.microcenter.com/product/600420/512gb-3d-nand-m2-2280-pcie-nvme-30-x4-internal-solid-state-drive
Yes, that's the one I have.
Not sure what's up with my 512 GB Inland. Other than the sequential speed the others look way off.
It's installed in an ASRock X370 Taichi in the M2_1 (32 Gb/s) slot with an AMD 1800x.
I keep using Win XP in a VM just so I can keep using my perfectly good Canon MP600 scanner features that were unusable starting with Win 7 because Canon didn't want to update the printer driver. I don't go online with it, however.
I haven't paid any attention to the mouse market in years. I still have three 518s that still work well as backup mice, but I've been using a G500s for the last several years. I hope it doesn't break anytime soon because I don't like what's out there out all in design or prices. My G500s is...
There's some more details in the Q&A section including "This is a AUO Panel"
I was considering that one if I was going 4k but I'm going Alienware ultra-wide...arrives tomorrow.
I don't have it, but others have recommended a Monoprice monitor. I think there are two models, but this one lists in stock with good ratings and most of the features you're looking for: https://www.monoprice.com/product?p_id=27772
I ordered a EVGA GTX 1070 Gaming Black Edition for my daughter on 12/21 for $334, and it arrived on 12/24 using super eggsaver free shipping and came with two games. It shipped from Indy and I'm near Columbus, but it beat the estimated arrival by two days.
My guess is they will both put back about the same percentage, but that's hardly the point. The statement was 7 mgd was going to drain the lake, but just Cleveland uses over 30x that, and then there's Detroit, Toledo, Chicago, Milwaukee, etc. I hope whatever pollutants they use are removed. But...
I just built my daughter a photo editing workstation. I built it in ITX format with a Ryzen 1700, CoolerMaster Elite 130 case, 16 GB memory, and a Nvidia Quadro P1000 video card. I don't think the Quadro is needed just for photo editing, except that it does 10-bit to match the BenQ SW2700P...
You may need a splitter like this: https://www.amazon.com/Maeline-Female-Plated-Headphone-Splitter/dp/B00PYZ2BT4/ref=sr_1_5?s=electronics&ie=UTF8&qid=1522547955&sr=1-5&keywords=3.5+mm+splitter I got the vmoda and it has seperate earphone/microphone jacks.
In my day the supreme toy store was Children's Palace. A huge toy store with a castle facade. It was awesome for a kid. Bought my first Avalon Hill board game there which led to many, many more. I never thought Toys R Us matched up with quantity or selection. But it's still a loss I think.
Technically, this should be in Free Stuff, shouldn't it? Anyway, I bit but I hate the automatic charge in 6 months. I hope I remember to cancel in August.
Also these: https://www.amazon.com/KabelDirekt-Gold-Plated-Auxiliary-Stereo-Smartphone/dp/B00DI8A05Q/ref=sr_1_6?ie=UTF8&qid=1519010438&sr=8-6&keywords=KabelDirekt I have an extension but the double male connector should be the same quality.
I think I found the solution so I'll post it here in case anyone else runs across it.
I think in the new 4.4 bios there is a new setting in the OC Tweaker Screen called OC Mode Change Switch. In that setting it defaults to ASRock Setting. The other choice is AMD CBS Setting. When I switched to...
I flashed to the 4.40 bios on my x370 Taichi and now when I try to set P0 to custom it resets to auto after saving and rebooting. Also, the core boost disable resets to auto also. This with an 1800x. Prior with 3.2 bios trying to set P0 resulted in no post and having to reset cmos. This is my...
If it helps I just upgraded and have a fresh Win 10 install on a 256 GB SSD. It's Win 10 OS, full Office 2013 install, Nero, PowerDVD, AV and such. It's at 65 GB with that. I have a 2 TB HDD for game installs. I guess the other tradeoff for SSDs is the larger the faster, but I'm not sure it...
Same thing happened to me last week. Swapped out my 2600k/P8P67 Pro for an 1800x/x370 and did a new install on an NVMe drive. My Win10 is the upgrade from Win7 Ultimate. I linked the Win10 to my MS account before the swap, but it wouldn't activate. I went on online chat and the tech RDP my pc...
About a month ago I got G.SKILL Ripjaws V Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model F4-3200C14D-16GVK at Newegg for $200. It's $220 now, but still over $100 less than the FlareX. It uses the Samsung memory, and it runs at 3200 with XMP in my Asrock x370...
I picked up the 1800x for $299 at Microcenter on Black Friday. I thought it was worthwhile at that price. I considered returning it for the 8700k, but I don't think it's worth the $100 more. The x370 Asrock Tiachi MB was $129 after the rebate, price drop, and $30 bundle savings.
I just ordered this one: https://www.newegg.com/Product/Product.aspx?Item=9SIA9ZH6GN8650
There's a review here: https://www.pcper.com/reviews/Cases-and-Cooling/Scythe-CPU-Cooler-Roundup-Mugen-5-Rev-B-Grand-Kama-Cross-3-and-Byakko
I'm selling two Gigabyte 290x video cards. I've owned them since new, never mined or overclocked (over factory settings). I've run them as an X-fire pair. Would like to sell as a pair but will separate. Asking $275 ea. shipped USPS priority mail 2nd day, US48. PayPal only.
Here is a link to...
I was selling two Gigabyte 290x cards on Ebay, but I cancelled when the winner was from Russia with an address in Germany even though I stated shipping to US only. Second place was from Venezuela with a PO in Miami. I have a few hours for the third place on a second offer but no response. The...
Yeah, I understand there are restrooms that might actually have soap or towels. And most doors aren't quite the same as smearing fingers all over a board, especially if you can just push them open. I know I've used ATMs that are so black from finger grease they make the selection text look...
I don't consider myself a germophobe, but the last thing I want to do before eating my meal is smearing my fingers all over a giant touch screen that 2000 other people just touched. Some ATMs look so nasty it's hard to use them, but at least I'm not eating fries right after that.
I had the task bar freeze for about a minute every startup or coming out of sleep. Icons on the desktop worked. After about a minute I could select programs on the task bar or start menu. Also, the update removed the modified WMC, and it killed it's ability to see the SD HDHR tuners. I rolled...
Sorry for digging up an old thread, but WMC and protected content appears to be fixed for 16.6.1. I've tried various other versions prior without success, but this one worked. All is well again.
I have about 8 SSDs, and am 0-2 on refurbs failing - one a Corsair Nova from MC (lasted a little over a yr) and a Crucial M4 (lasted a little over 2 yrs). The others, bought new, are all still fine.
I believe WMC is the only one that supports protected content. Also, I tried 16.4.1 on my Win 7 drive on the same PC and it broke the DLNA chain too. So it's breaking WMC regardless of the Windows version for me. 16.2.1 works for both Win 7 and Win 10.