Water Rig on Deck

Alright well I figured I would share this as it seems(to me) very interesting and something I have wanted to try for a while. Also the chip is the same as in this last thread I did:
http://www.hardforum.com/showthread.php?t=1419703



Basically I have done as the title suggests, put my right(in sig but a 4850 instead) outside. The temperature is roughly 55F(12.6C on temp probe) and the water temperature is reading at about 15C.



I can not tell what my temperature it idles at as the readings stop at 37/24. On prime95 and IBT however I end up with this at stock:





After a bit of raising he FSB 5mhz, than setting new clocks in BIOS every 100mhz, than getting to 4ghz I end up with this. Those max temps stayed there even after 2 more sets of 2 passes.



I am stillfollowing that process and have so far gotten to 4.2 with no issues. I am going to continue this process and hopefully pass my own personal record(in thread listed above). I'll keep updating as I hit milestones.

Here are some pics of interest as well.

That is something I would do.

But I live in florida

Originally Posted by LOCO LAPTOP

That is something I would do.

But I live in florida

Feel your pain bro. In Tampa it's still in the high 80's/90's

Southern VA but in the mountains. Although I plan to stop sorta soon the temp is supposed to go to about 38F tonight. And also the water temp has gone down to 14.6C and the air is 11.4C.

Alright hit 5ghz and its still rising.

http://valid.canardpc.com/show_oc.php?id=740557

Very nice.

Alright I was able to boot 5.1 with 1.6v... I'll be trying for 5.2+ probably tomorrow but for now I'm off to bed.

Sweet.

But you have to use your computer on the floor?

That's awesome. I would try that, but I think rain would get to mine. 5.1GHz is amazing btw.