Pics of my new Setup.

Specs:
Quad Swiftech rad
Dual Swiftech rad
MCR655b
Xspc dual bay Reservoir
7 feet of 1/2 ID Tygon Tubing
Enzotech CPU,GPU and NB blocks
Chinese Ebay fans

Location: 80 degree South FLorida

Leak testing and bleeding



Foam from the Primochill utopia


GPU





Temps on GPU(9800gtx) went from 43c Idle stock to now 29c Idle and 37c under full load this is at 860/2088/1329 So my fully loaded temps are lower than idle temps on stock Fan.and thats with a 122mhz overclock 3dmark06 score went up 742 points

CPU temps:

I have a c1 Q9550@ 4ghz
With a xigmatek s1283 and a Sythe Ultra KAZE 120x38mm 133cfm fan. idle temps were 40/42/42/42 Idle and 71c under full load

Now on the same overclock the temps are 38/42/42/42 Idle and Mid 50's under full load

Northbridge on my Asus p5q went from 39c to 31c.

can you explain the foam?

I did a little googling and reading and it looks like it's just given off when it's killing whatever was already in there.
I hear it can be a real pain / nasty.

What is your opinion after using it?

The foam lasted less than 15 mins before it all turned clear as you can see in the lower pics.

my what big radiators you have.....

So this is your LAN box?

If you made your tubing shorter on the bends and using 716 ID 5/8 OD (IDK if you are), you should be able to make those bends.

its alive its alive!!!! <thunder and lightning>

um.... yeah...

hey man looks really good. good job

Looks cool man.

So could you have fit the triple rad, in the front where the 3 LED fans are? Just curious

I've never seen that many rads mounted externally lol. Nice job though. That's a nice 20 degree reduction under load.

That looks rad-iculous

Originally Posted by Rossi~

That looks rad-iculous

LOL, I agree unfortunately :P