Kirby's FS/FT Thread

Status
Not open for further replies.
kirbyrj

kirbyrj

Fully [H]
Joined
Feb 1, 2005
Messages
30,693
Finally time to get rid of the stuff lying around :). New stuff added whenever I get it.
Flat rate shipping of $5 to be added to price to cover item and insurance.

References:
Heat: kirbyrj - http://www.heatware.com/eval.php?id=39076
Ebay: kirbyrj - http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=kirbyrj&ssPageName=STRK:ME:UFS
Paypal - [email protected]

Video Cards

Gateway GeForce Ti4200 128mb AGP 4X - $25
http://support.gateway.com/s/VIDCARD/VisionTEk/6002247/6002247nv.shtml (Click Main View for a pic of card). Got this in a trade. Looks like a Gateway rebadged VisionTek Ti 4200 with a passively cooled chipset. Tested it out and it works fine. Card only, no cables or driver CD's.

3DFX Voodoo3 2000 AGP 16mb - $10
http://www.falconfly.de/identify/Voodoo3_2000_AGP.jpg
Not my card, but looks just like that. A piece of history I suppose. Or you can fire up Quake 1 with OpenGL.

3DFX Voodoo5 5500 AGP 64mb - $25
http://www.falconfly.de/identify/Voodoo5_5500_AGP.jpg
That's not my card, but it looks just like that. Another piece of history if you're into that sort of thing.

Memory/RAM

Corsair XMS 2x256 DDR 184-pin PC3200 RAM - $45
2xCMX256A-3200C2 XMS3202v2.1 0251043
I believe they are BH-5. Ran 2-2-2@225mhz in the DFI Lanparty board listed above.

Cooling

Koolance Exos-Al External Water Cooling System - $200
http://www.koolance.com/shop/product_info.php?cPath=38&products_id=89
Comes with the Exos-Al unit, CPU block, HDD block, and unopened fluid pack. Mounting hardware for Socket 478 and Athlon 64 will also be included. Enough tubing for loop from Exos unit to CPU block will be included also (1/4" ID). Will be shipped in retail box.

CPU Block - http://www.koolance.com/shop/product_info.php?cPath=29_44&products_id=114
Same as this block but without retail packaging or Socket A mounting hardware.
HDD Block - http://www.koolance.com/shop/product_info.php?cPath=29_45&products_id=176
Looks like that except it doesn't have the same compression fittings. They are just barbs. You will need to purchase another thermal paste packet. Cooler only, no paste. Here's what you'd need. http://www.koolance.com/shop/product_info.php?cPath=30_34&products_id=48
A64 Mounting Hardware - http://www.koolance.com/shop/product_info.php?cPath=37_35&products_id=62
Coolant - http://www.koolance.com/shop/product_info.php?cPath=30_32&products_id=172

More added later when I get time. Don't hesitate to PM me with specific questions. Bump if you look :).
 
Sold

Abit IC7-Max3 s478
One of the best (if not the best) s478 boards available based on the Intel 875P chipset. Comes with retail box minus a few of the accessories. No secure IDE device, no I/O shield, no manual or driver CD. Just about everything else is there.

DFI Lanparty NF2 Ultra B
Review - http://www.hardocp.com/article.html?art=NTU4
Right up there with the NF7-S v.2 as the best of the best Socket A OCers. Comes with retail box and most of the accessories (just about all of them...didn't do a complete inventory).

Athlon XP 2000+
266mhz FSB, 1.67Ghz 256k L2 cache Socket A CPU. Identical in specs to the 2400+ Sempron except running the 266mhz FSB instead of 333mhz. OEM bare chip. Never OC'd. For $5 extra, I can include a Speeze WhisperRock HSF.

s478 Mobile Celeron 2.2Ghz
SL73Y - 2.2Ghz D1 stepping
http://processorfinder.intel.com/sc...ocFam=58&PkgType=ALL&SysBusSpd=ALL&CorSpd=ALL
The D1 stepping is known to be a good OCer. Pull from a Gateway M305CRV Laptop. CPU only.

Chaintech FX5200 128-bit 256mb AGP 4X/8X
http://www.newegg.com/Product/Product.asp?Item=N82E16814145087
Pull from an OEM system. This FX 5200 has a 128-bit memory interface and 256mb of RAM as opposed to the much more common 64-bit/128mb. With a little OC, can outperform FX5600 cards. Fan replaced with a Vantec Iceberq so 3-pin header needed. OEM so no cables just the card.

2x256mb DDR 184-pin PC2100 RAM
Some generic PC2100 single-sided RAM. Sticks are not identical, but they ran in dual channel in an Abit NF7. 512mb total. Nice cheap upgrade for an older computer :).

15" LCD panel from Gateway M305CRV
1024x768 resolution. Includes the whole plastic assembly. Unscrewed it right off the laptop and disconnected the wires. Great for an LCD mod project or replacement.

AC Adapter for Gateway M305CRV
As you can tell, I have a Gateway M305CRV that died.
 
bump...probably adding some motherboards today once I open my fedex boxes :D.
 
Bump for an awesome guy! Awesome parts, between that NF7, the DFI B, and the IC7!
 
Bump...almost got rid of the lot...the room is looking cleaner already :).
 
Status
Not open for further replies.
Back
Top