Where can I find a power supply cover shroud?

[xDiVolatilX]

For example if my case is older and and the power supply is exposed at the bottom and I dislike seeing the wires, what can be done about it?

Individually sleeving the cables is a pain in the ass and they would still be exposed.

New cases with built-in shrouds are cheap like 99 bucks or less sometimes but if you don't wanna deal with a whole nother case...

The thing is if you like your case but only dislike how the power supply is exposed what can one do?

I sold my welding machine and really don't wanna deal with fabrication or anything honestly.

Easy cheap fix to cover it?

 

[pendragon1]

CAD, the cardboard version and black spray paint.

 

[drutman]

CAD, the cardboard version and black spray paint.

Hell yea Pend, Hard OCP approved, I do scale modeling so I would use sheet styrene and CA glue to make a cover. Non conductive too.

https://www.amazon.com/Evergreen-Sc...sheets&qid=1712887284&sprefix=,aps,97&sr=8-12

 

[pendragon1]

sheet styrene and CA glue to make a cover.

that would also work well or even some color plexi maybe. cut it, heat it, bend it.

 

[Nobu]

that would also work well or even some color plexi maybe. cut it, heat it, bend it.

Flick it, twist it, turn it!

 

[drutman]

If you get Hard this is what you can do with the hobby and a PC /3d printer.

 

[toast0]

Put the case under the desk / behind the monitor. Can't see it, it's not a problem.

 

[cjcox]

Behold... the anti-solution.

Pull the wires out even more, undo any cable management. use lots of colors for cables (take off any sleeves), set a new design trend.

"We bought this pre-built, and see the amateurs tried to color coordinate, bind and hide all the cables. Sort of old school."

 

[xDiVolatilX]

Hell yea Pend, Hard OCP approved, I do scale modeling so I would use sheet styrene and CA glue to make a cover. Non conductive too.

https://www.amazon.com/Evergreen-Sc...sheets&qid=1712887284&sprefix=,aps,97&sr=8-12

I've never used this, any pics or videos of how it works?

 

[xDiVolatilX]

If you get Hard this is what you can do with the hobby and a PC /3d printer.

3d printer? I don't have one. Sounds complicated never done anything like this.
I'm just thinking of a 90 degree ps shroud hopefully I can buy it ready made.
This much modding/building is waaaay more than I have time to do.
Looks amazing though and fun props on you.

 

[drutman]

I've never used this, any pics or videos of how it works?

Plastic sheets can be cut with scissors or exacto knife. Wife has paper cutter with a sliding blade for easy cuts. Use superglue or plastic cement to make cover using 90 degree joints. No PC or 3 d printer needed.

 

[Darunion]

• corrugated plastic signboard could work too. Get it in black or white and paint or not.
• Sheet metal and snips and a vice to bend and shape, could then drill and mount it.
• Put an RGB led strip in there and make it a feature instead.