Recent content by aqon05

Most gtx460's will run 810-870 with a bit of extra voltage . If your running sli you may get slightly lower core speeds though. If you disable sli in control panel the cards with default back to stock speeds. In afterburner you can sync both cards, me personally i prefer to change both cards...

Hi Chaps Is it true that you dont get the same overclocking numbers in sli compared to a single card. Ive tested each card seperate and they will do 920/930 with +50 on core voltage in afterbruner. Now in sli ive got it stable at 865 on the core with +70 voltage. Anything over 865 it really...

You should be able to boot from a usb stick by changing the first boot in bios to removable disk. not too sure about installing xp from it though.

I saw an indepth test on bottlenecking with core 2 duo's and 8800gtx's, cant remember which site it was now. Basically an overclocked c2d managed to catch up with an 8800gtx at around 3.4 - 3.5 ghz. Anything higher and performance stayed the same until overclocking the graphics card and...

So just to clear things up if im running with 97.44 drivers and all my 3 memory controllers say 396 in rivatuner, is my card underperforming at the minute.

Ive just done some testing with 8800gtx 97.44 drivers with 3dmark 2006, at stock 575/1800 i get 8052, with 650/1800 its 8240, but when i change memory 650/2000 its 8278 seems pretty measly increase considering its a 11% jump on the memory side. all my 3 memory clocks say 396 in rivatuner as...

Im really gutted about this, i had the money this weekend to go and buy one of these boards with e6400 and some gskill memory. I could take the plunge and gamble but too much arsing around when i have a watercool setup and the board maybe one of the dodgy ones. might settle for an asus p5b for...