Recent content by RossY

bump

looky bump

I just went through a similar mess with the C1 error as well. It turns out that for whatever reason my motherboard was killing my ram sticks. I had 2x1GB crucial sticks in my IP35 Pro that went dead after a couple of months. RMA'ed the ram and the same thing happened. I would get random C1...

Ok so my video card is taking a crap on me so I'm looking to upgrade. I currently have a 7950GT and it has been a great card. Now there are only a few things I'm looking for in upgrading. The main thing is that the new card must have an hdmi out. I also want a little upgrade in gaming...

Ok problem solved. I took everything out of the case and set it on the mobo box with just the essentials and it fired up fine. So I pieced everything back together and finally found out that the front panel usb was not plugged into the pins correctly. I double checked the mobo manual and...

Thanks for all the replys guys. 350w is plenty for this system, and it does have and is using the onboard video. I highly doubt it is the ram as i have had bad ram before and the system would turn on but not post. This system that I am building won't even power on. I will test the power...

I just built a new pc for my dad. Specs are as follows: AMD 64 X2 5200+ Gigabyte GA-M61P-S3 2GB Corsair XMS2 DDR2 Rosewill 350W power supply I put everything together last night and went to fire it up and nothing. Whenever i pushed the power button, the led would light up for a...

I feel your pain with text pages. We have nightly processes that likes to wake me up via text message to a verizon company phone at 2:30a. It's awesome trying to debug code when you're half asleep. Anyway the format is [10-digit phone number]@vtext.com Example: [email protected]

I can't see the pic since im at work but i have the exact setup to the T that you have. I currently have mine set at 3.7GHz rock stable so I'll tell you what i changed in the bios. In your uGuru bios settings change your multiplier to 8 and change your FSB to 460. Then go into your voltages...

When i booted my ip35pro with my crucial ballistix for the first time i believe that the voltage was autoset at 1.8ish and the timings were 6-6-6-18. All you'll need to do is change it to what you want it. In general you can expect your mobo to just kind of guess what settings to use for your...

I can't really comment on the temp monitoring as i use uguru that came with my abit board, but if you want to monitor your cpu frequency then use cpu-z.

If you get ddr2-800MHz ram you MAY have to losen timings a little to get to where you want when you're overclocking. With ddr2-1066 you won't have to worry about that. I have 2GB of Crucial ddr2-1066 ram and when i had it running at 920, my timings were 4-4-3-9. However, now I'm at 1100MHz...

My 6750 idles at 25c and tops out at 51c at 3.7Ghz with my Tuniq Tower 120. I think i got it for $50 shipped.

I'm using 2x1GB ddr2-1066 of Crucial ballistix in my IP35 Pro and it runs like a dream. This stuff is rated for 5-5-5-15 at 1066MHz, but i currently have it at 5-5-4-9 at 1100Mhz w/stock volts. Anyway, the IP35Pro is a very nice board and will definately support your ram. In general...

bump for looking...