Search results

I have np posting at 200+ blck but my com is not fully stable. Think a try to raise the vQPI or relax timings a bit

which is the best memory I can get for that MB I have Corsair Dominator GT PC2000 CL8 right now but they are not compatable with the MB, maybe because of the use of Elpida Hypers. Can anyone confirm that??

is 16x 1.0 sooo bad. Didnt think so

omg sorry to hear. gl with it anyway. You did also have very high MB temps, didnt you?

if the cooler is a dual slot cooler then yes

is that clockgen 3.45 stock or?? Nice vdram :)

hey guys. What is the difference between the 333/666 dram speed and 400/800. Anyone of them which performs better or better stability? Used to run at 400/800, but I try 333/666 now

100c. oh shit. Many fans in your case. Is there enough room?

hmm okay. im running very fine now with the 400/800 divider. 5:6 divider cause a lot of instability for me. running 3500mhz on my E6750 at only 1,248 vcore and temps is promising. Vcore droop option disable did the trick for stable vcore for me. Enable was sooo bad! Notice: my vNB is 1,15 v...

is your MB good for 500FSB+ on quad??? Isnt 4GHz Quad not enough for you at mATX hehe

space - your could also lap your HS and CPU. 4500 Quad is nice and on air!!!

hey space. Your from Denmark too:D

Will try some of you settings. Thx, a a can see that my vcore is much more stable with vdropp control disabled. Weird they made that option suck so much. :P

and shall I change VTT if im on E6750 and not. E8x00 cpus. Im a bit confused about it :S

also got this nice mATX MB. How about the cpu vdroop option. Does it work or do you get better clocks with it disabled??

no always have quick boot enable. Hmm the logo screen should come if enabled, but anyway, I will rather have the informations about clockspeed etc. than the asus logo

exactly. Vista sucks. Running E6420@3200 and 4GB memory. Works perfectly. And have tried vista couple of times, too many problems og uses too many ressources

if somebody is interested, the OCZ 2*2GB Platinum works super fine in this MB. Runs 500mhz 5-5-5-15 at only 2,0 vdimm, 0,1 vdimm undervolted. I guess they oc to about 550 at 2,1 same timings and guess that 400-450 is possible af cas 4 2,1 vdimm The memories is really cheap!

which bios are you using t4orce? nice clocking, is it orthos stable?

WAW. 8GB most be overkill, or???

did it work the 9800GX2?

astral Always god with active cooling on NB. Just have good airflow then its no problem I guess. Run some Orthos Blend to see if its stable

Maybe P35/G33/G35 chipsets does better FSB on Quad Cores:)

I wouldnt go over 1,45 for 24/7 on a 45nm. For bench I will go as high as the temp allows me, sub 80 i max load

yeah. np. But maybe the bios says unknown cpu, but then just update bios

please use the newest coretemp for tempmeasurement

with the new 45nm penryns, all dividers are available. even under 1:1 if nessesary

gigabyte DS2R has done 600FSB on penryn:D

rontruong Just set +0,2 vdimm in bios. That is 1,8 (stock vdimm) + 0,2 = 2.0 vdimm

no 1,8 is the lowest you can go. Who wants lower than that???

on this DS2R you can save oc bioses aswell:cool:

me 2. Quad at 3600 is nice

have tried 2,2 vdimm. No problem here

yeah I sometimes has the same problem. No restarts when pc is on, but if I start it up, then is turns off and starts up with default cpu speed:(, but great I dont turn off my pc that often

it should fit but cant confirm it

no issues like that on my DS2R

my 800FSB cpu clocks a little better with F7rather than F4a and F6. But my memories clocks best with F4a, but I dont have issues like yours with oc reset and reboot or whatsoever:confused:

its based on the same, so E8400 would oc the same

hmm can you choose all 2 straps at 450FSB? Which is the fastest strap if you have testet and if possible

which shop?