How hold 6 3.5HDD in the PC-O11 xl dynamic case?

[baul]

Now the case only support 4 HDD. Can i use the default location of the psu as the HDD cage to hold the extra 2 HDD?

 

[baul]

Any help？

 

[Zepher]

yes you can, but where will you put the PSU?

 

[baul]

Yes, So i ask for help here.

 

[Zepher]

If you don't plan on putting fans on the bottom of the case, you can just sit your 2 or more extra drives on the bottom of the case.
This is my Air 740 I'll use as an example, 2 of my drives are just sitting on the bottom of the case.

 

[notarat]

Now the case only support 4 HDD. Can i use the default location of the psu as the HDD cage to hold the extra 2 HDD?

I get home at roughly 4pm Central time. I think I have a solution for you already made, but you'll need a friend with a 3D Printer.

It's a 3D Printed Top/Bottom piece which acts like a HDD cage and sandwiches four 3.5" HDDs and has a built-in mount for a 120mm fan to cool them. I cannot access my TinkerCAD account at work to look it up, but I'm absolutely certain it will work for your needs.

You can then install the other 2 HDDs in the stock location

 

[notarat]

Now the case only support 4 HDD. Can i use the default location of the psu as the HDD cage to hold the extra 2 HDD?

If you still need a 4 hdd bay to put in your case pm me an email address so i can send you the .STL file (for a 3D Printer to print the 4 hdd bay)

 

[NorySS]

If you still need a 4 hdd bay to put in your case pm me an email address so i can send you the .STL file (for a 3D Printer to print the 4 hdd bay)

is this still available?
i'm a boomer and i cant figure out how to send you a PM.

 

[BlackDragon1971]

If Mountain Mods is still in business, they had a 3.5" HDD cage that attached to 120mm fans or fan mounts... that was years ago. I had thought about using those in my mods in the past..

 

[Nobu]

Looks like there's enough room to put something like these on the floor, behind the PSU, if it's not too big and the cables don't get in the way.

Phanteks - Stackable 3.5" HDD Bracket Duo Pack Cases PH-HDDKT_03,Black https://a.co/d/bPjoFSz

Fractal Design Hard Drive Cage kit - Type B for Define 7 and Meshify 2 Cases - Black https://a.co/d/bJOb03x

Obviously, they aren't made for this case, so you'd have to figure out if/how to make them fit and secure them inside the case yourself.

 

[dogDAbone]

Velcro is your friend

If there's a will, there's a way....as long as there is some way to route the cables, all is good

ps... be sure to get the uber-heavy duty/automotive type for the longest, strongest holding powah.....