I just built a new i7 13700K system with an ASUS Tuf Gaming z690 motherboard and my RAM won't run anywhere close to its rated speed.
The RAM is Kingston Fury Beast 5200 RAM that a friend gave me and I'm using 4x16GB.
Is the RAM just bad or is it because I'm using all 4 slots?
I've tried increasing the voltage to both the RAM and memory controller, loosening all the timings slower than JEDEC specs and also tried booting with only 32GB installed. Using just 2 slots allowed me to boot at 4400MHz but that's it. My BIOS is also the latest version available.
Any other things I can try or should I just go buy new RAM and see if 2 sticks of 32GB each would work better?
The RAM is Kingston Fury Beast 5200 RAM that a friend gave me and I'm using 4x16GB.
Is the RAM just bad or is it because I'm using all 4 slots?
I've tried increasing the voltage to both the RAM and memory controller, loosening all the timings slower than JEDEC specs and also tried booting with only 32GB installed. Using just 2 slots allowed me to boot at 4400MHz but that's it. My BIOS is also the latest version available.
Any other things I can try or should I just go buy new RAM and see if 2 sticks of 32GB each would work better?