Recent content by jjustinia11

I am upgrading my P8z68 to the z87 deluxe quad. I have CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ16GX3M4A1600C9B. Will I have any problem going to this board with a 4770K? I am using them in XMP for 2 years now with no issues. Was...

So I tried many things but in the end I purchased a new set of RAM, a 16 gb kit (corsair vengeance 1.5 v), so it was all matched as per the advice given and it has been smooth sailing from there. I have the voltage bumped up, I match the SPD XMP profile and not one single hiccup. Even sleep...

Will look into all you mention and reply. Since you asked so nicely about Bios I am responding quickly with that I am on 0606, I thought I mentioned it in an earler post.

ok, so I reinstalled windows 7 ult. running just IE, office 2010, all updates, and the RAM at the SPD timing and increased voltage. the RAM is 1.5V FYI. I have recieved 4 BSOD in a 24 hour period (computer was off most of the day). this was in the latest dump file...

Cisco, what have I done to draw your ire? I like computers, I dont like golf...:) I dont have XMP enabled, I have it as manual and blck /bus set at 100. If I did not do that BLCK went to 100.33 How much more juice would you recommend for the RAM, please. I have always been appreciative of...

CPU is at a chilly 39C. All components are new, about 8 months at this point. PSU was replaced by corsair earler. I have run Memtest already no issues. How would I check the CPU or PSU with having alternative parts to try? I will look at the GP drivers now. I feel like it is a...

Ok. I am back. here is my problem. Stability. My system randomly restart, locks-up. restarts, or BSOD. Could be working fine for 8 hours or just for 2 minutes and then needs me to hard restart. again random. when its working it is rock solid 90% of the time, no issues, then sudden...

So what do you win...

ok. I figured out the problem. I made a bone head mistake in reconnecting my system. I am not even gonna say what. all works great now. Mobo is fine.

I was kidding when I asked about removing the mobo. it was meant as sarcastic and rhetorical. glad you got it... Unfortunetly I get home late from work typically so I will have to wait till I have the time. Probably on Thursday...Appreciate the advice. I will let you know what come from ACTION.

I did not ignore your advice just missed. I will try. And it is 90 degrees. The nuts on the brackets slide so I obviously got it to do something it was not intended to do. This may be a short issue. Would that resolve after I reseat the bracket? thoughts? Who think I should take...

I have a HAF X with a cut out for the back plate. So I could see . The left side is slightly obscured but not by much. I puled the power cable out of the PSU-ie. no current. The one thing I can think of is I see now that the back plate should be rotated 90 degree as there is a cut out for...

but it still boots up and runs fine???

I just replaced my cooler h70-to -H80. I also added a HDD. Now on reboot I get the follow wierd issues. 1) I dont see the UEFI screen anymore when the computer boots up. It is black and then all of a sudden windows is up and running fine. With one exceptions which is issue 2... 2) I...

I have uninstalled Intel RST as there were known issues there. SSD has the latest drivers. I was thinking it had to do with the BLCK being at 100.33. I set it to manual and forced it to be 100.00, maybe that will help. But I know other have had this issue with board and BIOS problems...