Recent content by trent

Great experience, just completed the RMA process. I have 4x1GB DDR2-800 Tracers. I started getting random reboots and narrowed it to one module. I did the RMA request for the kit (2 modules) with the defective module. 2 days later I got the authorization and they mentioned voltage spec change...

I have Vista 32bit with 4x1GB. I've always left remapping at its default (enabled), because Vista reports 3,3xxMB accessible. When I read this thread, and particularly Big Lar's post, I went ahead and benchmarked my RAM with it enabled, rebooted and disabled remapping and benchmarked again...

nomade1999, I just read the posts you linked to, and it seems you did the pencil mod, although it seems like you might try reapplying as there is quite a bit of drop. For me, if I go one step higher with vcore there is 0 v. drop, and 0.008 at my stable voltage (lowest I can go). Anyway I'm...

KillaChaos, I also had the same issue with Vista and sleep, and if I remember correctly it used to even crash sometimes. But before hitting the reply button just now I tested sleep again and for the first time it seem to have worked with no 100% fan speed or crashing issues. The only thing I can...

Use promo code to get $40 off: EMCAGCGBG http://www.newegg.com/Product/Product.aspx?Item=N82E16824014173&Tpk=g2400wd

I noticed that the image isn't as sharp with VGA compared to DVI. The blurriness is more noticeable on text. I don't think you'd even be able to notice it while gaming or watching movies, because it isn't too severe. I also once used the screen with my laptop (Ati 9700 VGA out) and the...

You mean the older D9 run hotter than the new single sided ones? Are the new ones failing memtest? Well it wasn't that great for me either, after all. Stress testing causes a reboot after a while. CPU isn't running too hot. Memtest isn't generating any errors on the same settings with all 4...

Vengance_01, I'm gonna guess that you didn't have an issue with running 4 sticks like I did, based on what I found. Since you're running at 1:1 FSB to RAM. So I tried increasing the NB voltage, I only went 2 notches up but that didn't work. Before trying any further, I tried 2.1v for the RAM...

The latest version. I believe it's 506.

Thanx for the quick response. Ya both pairs (old and new) are single sided, but they are different batch numbers obviously since they were bought about 2 months apart. But the part numbers and UPC are the same. I'll give the north bridge voltage a try. Thanx for the suggestion. Currently I...

I had 2x1GB Ballistix Tracers PC2-6400. Today I received another pair (I know not the best RAM but it was toooo cheap not to buy :p) and it seems I cannot run 4 sticks at the same voltage setting as before with 2 sticks. Before with 2 sticks 1.98v was rock solid stable, 1.96v would...

10e, nice review :) I'm not sure if I missed it with my quick read thru, but how do viewing angles compare to the G2400W?

The monitor has a resolution of 1200 pixels along the vertical. 1080p is 1080 pixels along the vertical. So you should have an extra 120 pixels, 60 from the top and 60 from the bottom, hence the bars. Unless you use 1:1 or "Aspect" setting your input will be stretched in the vertical direction.

Any ideas?

I believe you can have 3 inputs and switch between them. I don't see why it wouldn't be possible. It's just that I tried it with only 2. Sorry if I confused you with what I said.