Search results

I'm trying to find out if anyone has had a problem trying to put this Zalman CNPS9500 LED CPU Cooler on the mentioned mobo? I'm just truying to find that out before the day is over so I can order my case. If there were problems, could someone please suggest a good HSF pleaase? I've...

Ok, this may take a minute, but I need to sort out all of the facts before I go and drop a bunch of money on something I might not like. Anyway, It's time for me to finalluy buy a new Television fo rthe living area of the house and of course with all of the choices out there it's not as cut and...

I plan on getting this mobo the day it's available, but I have a few quuestions. On the Asus site it says,"Corsair XMS-3500LL PRO Ready The new XMS-3500LL PRO is the industry's first high-density memory that delivers blazing performance at CL2-1T low latency. Available in a matched pair of 1GB...

I finaly found my missing Disk 3 from Doom III, trying t install but it seems that I've damaged my disk. I get errors when trying to install. The pak004.pk4 located on disk 3 is corrupt, so if anyone here has the game can I get you to just copy that file to a floder, zip it up, upload it...

Ok, I've been trying to figure out where the multiplier for the CPU is in the BIOS of my mobo, but I can't seem to find it. If you have the same mobo and know where it is or what it's called on this mobo (specs in sig) can you please help me out here? Thankx.

after looking at Coolermasters new offering I may have to eat those words. Check out the new Stacker case. CM Stacker 830

This is the PSU I finally decided on. Anyone here have this PSU? If so what is your take on it? It's a certified PSU for SLI and I know it has to kick the shit outta the Ulta-X psu I have in my box now. Going to make the switch this weekend.

Ok, I've been trying to get a question answered for a while now and have come up with ziltch. What I need to know is if this mobo http://www.newegg.com/Product/Product.asp?Item=N82E16813131540 will allow mw to fill all 4 dimm slots with 4x512MB of RAM and still run in dual channel at DDR400...

Anyone know of some guieds that will take me step by step in oc'n this FX-57?

I decided to reformat my computer yesterday after installing my FX-57. This is the first time this I've ever had a problem with a reinstall. Everything seems to go fine up to the point when it finalizes the install, at this point I get a dialog box that tells me to loacte missing files on the...

Just poped this baby in and I'm about top torture test this monster with Prime95. After that I'll run some benches to see how is does paired with the Dual 7800GTX's. Be beack in a little while. And it runs hella cool.

So I moved my room around and ended up sitting right in front of the dam AC. Needless to say I was freezeing my ass off, so I sat and pondered for a moment......asking myself, "Self, how can I get that super cold air to my cpu?". So I started to lok at all this cardboard I have, (from all of the...

going step by step from the guide posted in this forum. This 3800 is a Newcastle s939 @2.4 stock. The highest I was able to get it was 2.6 but very unstable. Right now it's at 2.568 these are the settings: FSB - 214 x 12 HTT -x5 RAM timings - 2-2-2-5 Now I've tried setting the ram at 166...

Ok, so far this monitor has just been amazing with games, but when watching DVD's or TV the picture is just crap at full screen. Is there a recommended decoder to use? Is there a certain program for playing movies that will show the true quality of this monitor? Please help. I bought this mainly...

I beklieve I installed it but I just get sent to a website whenever i launch the program. Any ideas? How do you enable and use the decoder? I'm asking becasue I believe my DVD playback picture looks like crap on this Dell2405 monitor. I know it shouldn't but it does. What else can I try to get a...

Has anyone tried to fill all four DIMM slots with double sided mem moduels yet? I know trying to do that with single core CPU's has proven to be difficult. I really would like to stuff as much ram in a system as possible and was just wondering if the dualcores will enable us to finally do this.

Is there a hack or way to get BF2 to play at the 2405's native resolution? 1600X1200 is as high as I can go, it looks ok but with this widescreen format I think it'll look much better at the monitors native res. Is there a way to do this? Also, I can't get my grafix card setting to output the...

I just poped these cards in and if I try to go into SLI mode I get a message telling me that my setup is SLI capable but my current configuration prevents me from running SLI mode. What does this mean and how so I fix it? Ok I took a screen of what I'm talking about. Notice how it has my...

I first saw this monitor at a LAN I recently attended and when I saw it I knew I had to have one. The day after I put in the order. I got it lastnight after work. Hooked it up and I'm impressed. I'm using this to replace my 2 CTX 19" and with this you don't need 2 monitors. (but I still have a...

I just ordered my 7800GTX's this morning and I'm ready to give up these 6800GT's. They are very good performers and they've treated me very well. Both cards were purchased together and they are only a few months old. If you are interested, email me or PM me. I'll let them both go for $475.00

Does anyone know of a place where I can find barb adaptors? I would like to go from 1/2" to 1/4" inch. It'll be used for a resivoir.

Ok, I made a grave mistake, I bought a power supply that I can't use. It's brand spanking new and it was only hooked up once. Also included are 6 extra y-molex cables and 1 extra PCI-X cable. $100.00 and it's yours. This PSU is for people who are running a SINGLE PCI-X grafix card. I'm running 2...

Motherboards Hardwarezone has debunked a compatibility issue with the MSI K8N SLI. We got word from a few concerned readers about an installation issue with MSI's K8N Diamond and K8N SLI Platinum. Apparently two of the capacitors located beside the second PCI Express graphics slot were...

Ok, I have a laptop that crapped out on me, but I do know the screen is still good. I'm trying to find out if it's possible to take the screen off of the laptop and be able to hook it up to my PC?

What are the chances of getting an even score like this? I thought it was pretty cool. :D

For the life of me I cannot network my computers using the dual lan's on this mobo. I've run the setup wizard numerous time following the instructions completely, but I get nowhere. Can someone please help me out? Is this even possible using the dual lan on this mobo? Spec's in sig.

Well, after debating wether or not if I should get a new PSU I decided to go ahead and get one for this SLI setup. Not that I was having any problems with the current PSU I just wanna make dam sure I have the right amount of power at all times.

Ok, all of a sudden whenever I restart my computer from the Start menu or from any other way, my computer hangs right after the post screen. The funny thing about this is that it started doing this right after I installed Quake III Arena. I've installed that game on numerous boxes and have never...

Started benching these cards in 3DMark 05' starting with the 71.89 drivers. Using those drivers I scored 8868. I thne installed the 77.30 drivers and scored 9090. Yesterday the new 77.72 drivers came out and after installing those here's my bench. I'd say that's a significant jump based...

The problem I'm having is that when I'm in SLI mode and I'm in a game, namely BF2 or Desert Combat I get these small black squares that look like static everytime I move my mosue to look in game from side to side. Or when I fly an aircraft in the game these small static black squares are...

WTH? :mad: I finally got this SLI hooked up, but having some weird things happen, first; in the display settings menu where you can choose which display you want as primary I have 3 monitors to choose from and I only have 2 hooked up. WTH? Secondly, when enabling SLI mode it disables all other...

Ok, the day has finally come for me to begin the daunting task of coverting my current box into a kickass SLI system. In short, I have to do some cutting for the new radiator. I'm going to put a new heatsink for my CPU and watercooling. I have to cut plexi (mirrored of course) for the interior...

Just got my PCI-X cables for my PSU and my 20-24 pin cable. Also I got some Arctic Silver thermal compound as well as some remover. Not that everything is here for the conversion I will start on it this weekend. I chose to go with getting the cables so that way I could avoid having to buy a new...

Got this mobo and have yet to hook it up. I'm trying to figure out what this semi "L" shaped metal bracket is for. There's nothing in the manual about it. Anyone know what that bracket is used for?

piece of hardware before I put this new system together. What I would like are some opinions on something. Do you think I should wait for the 64X2's or should I just throw my FX-55 in my new system? Here's what I have so far. MSI Neo4/SLI 2 X MSI NX6800GT's 2 X 512 Corsair Twin XMS PC3200...

I'm seriously considering getting this Baykit from AquaComputer http://www.sharkacomputers.com/aqcoaqatsi.html I know I'll need an Aquatube to acompany it, my question is, is it compatible with 1/2" tubing? http://sharkacomputers.com/aqcoaqwaresi.html

Looking at the specs in the second half of my sig, what HT settings should I have that mobo set at for optimal performance? Right now I have it all the way up at X5.