Abit AN8-32x SLI no VIdeo

[gurgle]

Very bizarre issues here:

I installed my Abit as an upgrade from a MSI ms-7125 Nforce 4 board.

My MSI was working well, but i wanted SLi.

Issues:

- I do not get video output when I boot up now. I was able to boot into Windows once, but everytime I reboot now I dont get video. Nothing has changed. I reset the cmos, unplugged for 1/2 hour.

- Sometimes I can get it to beep at me. I start the computer up and it beeps every couple seconds.

I have a Antec HE430 PSU, could this be the issue?

TIA

 

[Dominat0r]

Check your stick for the revision of the PSU, should be like A4 i belive...or in the serial number the first 4 digits is the month and date. I belive if your date is 0512 or higher then it ok.

Now, im having similar problems with my Neo HE550 and my A8N-SLI. I now belive it was due to the PSU and not the board. I swapped the Antec for a BFG650 and its working now. Not crashing now. Seems pretty stable...

Now, i got a good deal on forums for a AN8-SLI 32X, so this board will be going back to RMA again or i belive it will work decent with a non Antec PSU =)

I would check to see if that HE430 is the older revision, might account for some problems.