BenQ G2400W & 1:1 pixel mapping?

[verylostindeed]

Anyone know if the BenQ G2400W has 1:1 pixel mapping? Thanks a ton.

 

[Chartal]

I just download the manual from the Benq Taiwan and there is a 1:1 option in the Display Mode section of the menu.

But I don't know if it's apply to all country.

-->> Taiwan G2400W Manual

-->> Translation of the menu from Google Translate

Display Mode 
 (Display model) 
 This feature provides the outside 16:10 
 Not in proportion to the original geometric distortion 
 Status Display. 
 • Overscan ─ losers slightly enlarge 
 All images. If the image around 
 Noise disturbance, so that 
 Using this feature hidden noise. 
 • Full (full-screen) - Full - 
 Show Input video screen ratio 
 Like. Is the ratio 16:10 
 The best image display. 
 • Aspect (the original ratio) - losers 
 No images of the geometric distortion 
 State, and to the extent possible release 
 The big screen. 16:9 image water 
 - Filled screen, and 4:3 video 
 Like to fill the screen vertically. 
 • 1:1 - to the original resolution was 
 Show input image, not change 
 Showing ratio. 
 Press the "ENTER" button to select 
 This option. 􀁗 or 􀁘 again? 
 Bond set changes. 
 In accordance with the input signal sources may be, 
 "Display Mode (Display Mode 
 -) "Will have the option under 
 Different. 
 When the signal sources 
 DVI or D-sub, 
 And the input image for 
 Non-widescreen ratio 
 When: 
 • Full (full-screen) 
 • Aspect 
 (The original ratio) 
 • 1:1 
 Or 
 When the signal sources 
 HDMI pm: 
 • Overscan 
 • Full (full-screen) 
 • Aspect 
 (The original ratio) 
 • 1:1