cpu/13 divider??

X

xdkimx

Limp Gawd
Joined
Jul 17, 2005
Messages
443
for some reason i cant seem to get the cpu/13 divider unless i use a low multiplier (9x) and its too unstable to use, is it jus not there with certain multis? 11 / 5/6 should be 13 but it skips onto cpu/14

and is it jus me or does cpu-z seem to love reporting incorrect ram frequencies lol
 
xdkimx said:
and is it jus me or does cpu-z seem to love reporting incorrect ram frequencies lol
Click to expand...
it reported my 2-3-3-6, which was 2-3-3-5 in bios, which was really 2-3-3-7.....turned it to 2-3-3-5 in bios, cpuz reads it as 2-3-3-5, . Everest reads it at 2-3-3-6 :p

soulsaver
 
there is no 10/13 divider on a64... the implications are too spooky to even imagine... unleashing such a paranormal force onto the 'net to breed... I shudder just thinking about it...

on hotels sometimes they skip the 13th floor and go right to 14... but you fuckers on 14... you know what floor your really on... don't jump out the window expecting more time, you will hit the ground faster.
 
150mhz divider with the 9.5x multi?

isn't there a 4:5 ratio (160mhz) in the dfi too? that would get 13x with 10x cpu multi
 
it is impossible to get 10/13... I promise you!

it goes 10/11, 10/12, then 10/14, 10/14, 10/15, and so on...

10/14 twice... meaning two dividers do the same thing.
 
oooo did we come up with something eclipse didnt know?! hehe jk.. dont hurt me ._.

hm so i guess no 13, i tried to increase my cpu to reach that divider but it required too much voltage so i gave up :p

edit: oops i said that wrong, i increased my cpu frequency to match the right frequency for my ram :[]
 
You must log in or register to reply here.
Back
Top