dalearyous
[H]ard|Gawd
- Joined
- Jun 21, 2008
- Messages
- 1,922
due to limiting circumstances,
network 1 (192.168.100.0/24): we have a router with only 2 ports on it: 1 for internet and 1 for the switch.
network 2 (172.16.254.0/24): juniper srx 210 and cisco 3560 switch.
network 2 needs to access a specific device on network one. the vendor is going to configure a port on the switch on network 1 for network 2. on the network 2 side, should we just configure a static route on one of the interfaces of the SRX210 to handle network 1? or if the vendor is willing to VLAN should we pursue that solution?
thanks in advance!
network 1 (192.168.100.0/24): we have a router with only 2 ports on it: 1 for internet and 1 for the switch.
network 2 (172.16.254.0/24): juniper srx 210 and cisco 3560 switch.
network 2 needs to access a specific device on network one. the vendor is going to configure a port on the switch on network 1 for network 2. on the network 2 side, should we just configure a static route on one of the interfaces of the SRX210 to handle network 1? or if the vendor is willing to VLAN should we pursue that solution?
thanks in advance!