Dell servers and PDU

Corporal79

Gawd
Joined
Oct 28, 2004
Messages
889
Server 1
PowerEdge R710 w/ rapid rails (Service Tag=5LVTNL1)
2 x Intel® Xeon® Processor E5504 (4MB Cache, 2.00 GHz)
64GB RAM
6 x 500GB 7.2k RPM SAS hard drives
Quad port Gigabit NIC
SOLD

Server 2
PowerEdge R710 w/ rapid rails (Service Tag=FM19FP1)
2 x Intel® Xeon® Processor E5506 (4MB Cache, 2.1GHz)
64GB RAM
6 x 500GB 7.2k RPM SAS Hard drives
Quad Port Gigabit NIC
SOLD

Server 3
PowerEdge 2850 w/ rails (Service Tag=950JK91)
1 x Intel® Xeon® Processor 3.00GHz, (2M Cache, 800 MHz FSB)
4GB PC2-3200 RAM
2 x 36GB 15K Ultra320 SCSI Hard Drives
2 x 73GB 10K Ultra320 SCSI Hard Drives
1 x Quantum 18.4GB Ultra 160 SCSI Hard Drive
1 x Fujitsu 18.4GB Ultra 160 SCSI Hard Drive
Dual Gigabit NIC's
$200


Tripplite PDU1230
Basic single phase 30A 208/240V PDU
NEMA L6-30P input; 15 ft. / 4.5m line cord
20 outlets (4 C19, 4 C13 front / 12 C13 rear)
SOLD


http://www.tripplite.com/pdu-power-d...phase~PDU1230/

Dell PowerConnect 5424
24 port gigabit switch
$175


If you want pictures of anything let me know and I'll get them posted but I figured if you've seen a powerEdge, youve seen them all. I put the Dell Service Tags in so you can check out more detailed information. Both R710's have PERC6 RAID controllers as well. Wasn't really sure where to price the servers at, the receipts from Dell when we bought these show $4800 each for the R710. They were built into a XenServer pool that was never fully utilized by the customer. I'm open to reasonable offers, depending on what they go for I might be willing to split the shipping costs.
 
Last edited:
Back
Top