Headcase_Fargone
Limp Gawd
- Joined
- Mar 25, 2010
- Messages
- 284
I've been running two 1080p monitors for a while now, both with separate DVI-D cables connected to one of two Crossfired Radeon 6970s. I recently picked up one of the Qnix 1440p displays which comes with a dual link cable and I can't seem to make it work with another monitor.
The Qnix only works on one of the two ports on this video card. If I plug it into the other I get no signal. Plugging it into the "correct" port I get a signal and everything works fine so long as the Qnix is the only monitor plugged in. If I attempt to plug a second monitor into the other DVI port on that same video card with a DVI-D cable THAT monitor will then get a signal but the Qnix loses its.
What do I need to make these monitors work together?
The Qnix only works on one of the two ports on this video card. If I plug it into the other I get no signal. Plugging it into the "correct" port I get a signal and everything works fine so long as the Qnix is the only monitor plugged in. If I attempt to plug a second monitor into the other DVI port on that same video card with a DVI-D cable THAT monitor will then get a signal but the Qnix loses its.
What do I need to make these monitors work together?