e6400 + Tuniq Owners, what temps?

B

Battle_Rattle

Limp Gawd
Joined
Nov 6, 2005
Messages
327
Please post your temps with the enclosure and overclock settings... I suppose e6300's are good too.

Copy and paste and use this as a template

Idle Temp:
Load Temp:
Program and setting used to load the cpu:

Program used for measuring temps:
Computer Case (fans):
Clock Speed:
CPU Vcore:
Thermal Interface Material:
Tuniq Fan Type and RPM:
Tuniq Lapped?:
CPU Lapped?:
Other:
 
Idle Temp: 40C
Load Temp: 45C
Program and setting used to load the cpu: TAT

Program used for measuring temps:TAT
Computer Case (fans):p180 *look at sig
Clock Speed: Sig
CPU Vcore: v2.3
Thermal Interface Material: ?
Tuniq Fan Type and RPM: lowest setting original fan
Tuniq Lapped?: No
CPU Lapped?: Yes
Other: Sig
 
elyrly said:
Idle Temp: 40C
Load Temp: 45C
Program and setting used to load the cpu: TAT

Program used for measuring temps:TAT
Computer Case (fans):p180 *look at sig
Clock Speed: Sig
CPU Vcore: v2.3
Thermal Interface Material: ?
Tuniq Fan Type and RPM: lowest setting original fan
Tuniq Lapped?: No
CPU Lapped?: Yes
Other: Sig
Click to expand...

Ummm Cpu VCore is 2.3? Thats Ballsy... lol I think you put down Vdimm

And Tat at 100% load?
 
E6600 @ 3.325

Nothing lapped
Voltage is at 1.375 or somewhere around there

40/37 if it's kinda hot or 37/35 if it's nice (by nice I mean around 72F and by hot I mean > 75)
 
C2D 6400, Asus P5B E-Plus, AC Freezer 7 Pro, 2x1Gb 800Mhz PC6400 DDRAM2 PQI modules in dual channel setup

Idle Temp: 44C
Load Temp: 55C
Program and setting used to load the cpu: 3dmax9 rendering, cca 1hr

Program used for measuring temps: Asus AI Suite
Computer Case (fans):
Clock Speed: intel preset - 2.133GHz
CPU Vcore: 1.26 +- (according to AI Suite)
Thermal Interface Material:
Tuniq Fan Type and RPM: AC Freezer 7 Pro, 2600RPM
Tuniq Lapped?: no
CPU Lapped?: no
Other: my cpu idle temp readings are very disspapointing
 
now with intel TAT temperature readings are

idle : 30C - 2500RPM
37C - 1000RPM

load : not tested yet
 
Cooler Master CAC-T05 case
Gigabyte DS3 rev 2.0 mobo
Tuniq Tower 120
Enermax 500W Liberty PSU

Idle Temp: 30-33
Load Temp: 53-55
Program and setting used to load the cpu: 2 x prime95 / 1x orthos small 8kb fft
Program used for measuring temps:speedfan/easytune5 same results
Computer Case (fans):default 1x12cm intake front, 1x12cm back
Clock Speed: E6300 @ 3325MHz multi 7 x 475fsb, mem multi 2.00
CPU Vcore: Bios 1.375V (+.05V), easytune 1.34 idle / 1.31 load, speedfan/cpu-z 1.33 idle / 1.296 load
+.1V MCH (without it I get absolute crappola 3dmark06 scores) now 10376 woot
Thermal Interface Material: Tuniq stuff (AS5 in storage until cleaning in 4-6 months)
Tuniq Fan Type and RPM: load 1900rpm, 1700rpm@48C, idle 1050rpm, 850rpm@25C, <20C 0 rpm
Tuniq Lapped?: No
CPU Lapped?: No
Other:
G.Skill 5-5-5-15 6400CL4D 2GBPK +.2V 1:1
320MB XFX 8800GTS o/c only when gaming/benching 600:985 fan 90&#37; 66C full load
Tuniq fan set to max(geez the back fan plate took me ages trying to bend and fit in the back of the case (the knob's too big lol)). On startup temp is 15C working up to 30C after 8 minutes w/o load. Temp falls 2C each second after load back to 30C.
Screws I've done up fairly tight and the thread is just out of visible range when looking at mobo
Funny thing is though 3 of the 6 copper heatpipes are sort of damaged/half missing in the last cm before protruding from the heatsink plate but it doesn't seem to affect heat dissipation at all I don't think.
My system temp is 40-43C which doesn't really change even under load. What's this/is it a bit high?
 
Showing results 1 to 15 of 63
Search took 0.60 seconds. Search: Key Word(s): 6400 tuniq temp ; Forum: Overclocking & Cooling and child forums

i found 63 articles on this topic within half a second. try it.
 
Mine found more...

Showing results 1 to 15 of 70
Search took 0.30 seconds.

...and took 1/2 the time of yours. ;)

There may be topics related or exactly like this one, but we can all get along, right? Anyway, here's my info:

Idle Temp: 37
Load Temp: 50
Room Temp: 24
Program and setting used to load the cpu: Orthos Large

Program used for measuring temps: Core Temp
Computer Case (fans): Stacker 810, Click for pic, 4 Scythe, 2 in front, 2 in rear, 2 Stacker low cfmers in the middle, got an antec spot fan over the RAM now. :D
Clock Speed: 3200MHZ
CPU Vcore: 1.3250
Thermal Interface Material: Zalman STG, but I don't think it matters much anymore
Tuniq Fan Type and RPM: Scythe SFLEX E, 1200RPM, 49CFM, 21DB (no idea where they got that figure, lol)
Tuniq Lapped?: not yet!
CPU Lapped?: yup, but it's got a couple nicks that need fixin.
Other: Cheers, the weekend's almost here!
 
ghost6303 said:
Showing results 1 to 15 of 63
Search took 0.60 seconds. Search: Key Word(s): 6400 tuniq temp ; Forum: Overclocking & Cooling and child forums

i found 63 articles on this topic within half a second. try it.
Click to expand...


Congratulations... Now try that search button again and find me a thread thats as expansive as this one...

Out ~ BR
 
Kuyt said:
http://hardforum.com/showthread.php?t=1145108&highlight=tuniq

http://hardforum.com/showthread.php?t=1147224&highlight=tuniq
Click to expand...

Sweet... you have truly helped me... how could I have been so near sighted? Perhaps it was when I was 12 and an evil librarian named Greta threw a book at my forehead. Ever since then, words like boolean have frightened me. Once, In a moment of strength I tried google but I ended up in the fetal position and sobbing at the keyboard.

It took this thread to get me back on track, and I thank you...
 
Idle Temp: 35-38c
Load Temp: 48-55c
Program and setting used to load the cpu: Orthos "Small"

Program used for measuring temps: TAT, CoreTemp
Computer Case (fans): Centurions 5, 120mm Real, 2 X 80mm Front
Clock Speed: 3.52ghz
CPU Vcore: 1.46825 (1.43 Real)
Thermal Interface Material: Ceramique
Tuniq Fan Type and RPM: Original Fan / Full Speed
Tuniq Lapped?: NO
CPU Lapped?: NO
 
You must log in or register to reply here.
Back
Top