FS: 1u Dual P3 1GHz server bundle, 22'' Samsung 220WM Monitor

A

anths

Limp Gawd
Joined
Jun 14, 2001
Messages
491
Have to get rid of some gear, no more space left in the house!

Pentium 3 server bundle consists of:
Tyan Thunder LE-T (S2518UGN) Motherboard featuring:
- Dual PGA370 ZIF sockets
- Supports up to two Intel Pentium III Processors or Pentium III Processors with 512kB Cache (Including Tualatin Processors)​
- 4 angled PC100/133 ECC DIMM slots; 4GB max
- Integrated Adaptec AIC-7899W Dual-Channel U160 SCSI controller
- One 64-bit 66MHz (3.3-volt) PCI slot and one 64-bit 66MHz (5-volt) PCI slot.
- Integrated Dual Intel 82559 LAN 10/100 controllers​

Dual Pentium 3 1Ghz Socket 370 CPUs

Dual Alpha heatsinks with 60mm fans (NOTE: These are standard height and can not be used in a 1u case). The fans have had the power and ground wires detached from the motherboard connector in order to run them at 7v for nearly silent operation.

4 512MB ECC PC133 DIMMS; Can’t recall manufacturers off hand (I believe 1 set is Crucial and 1 set is Kingston); 2 sets of 512MB DIMM pairs, each pair has a different manufacturer. RAM never failed and passed memtest for 72 hours before the server was decommissioned.

Samsung 220WM Monitor - SOLD
Received this as a present for Christmas but only used it for a day and put it back in the box. Comes with power and DVI cables. Monitor is great, no stuck pixels, very clean looking. I bought a 37’’ TV the day after I received this and have been using that as my monitor since.
Features include:
- Screen Size : 22''
- Resolution : 1680 x 1050
- Brightness : 300 cd/m²
- Contrast Ratio : 700:1
- 5ms Reponse Time
- Built in speakers (5w total I believe; loud enough to watch movies through if you so desire)​



Prices:

Server Bundle: $95 + Shipping
Monitor: SOLD

I am located in 60660 if you want to run shipping estimates; references in my signature!
 
I will pull the CPUs off later today and get the S-Spec numbers for you. Any particular information about them I could give you without pulling the heatsinks off (not that its a big deal, I just won't be home until later)?
 
anths said:
I will pull the CPUs off later today and get the S-Spec numbers for you. Any particular information about them I could give you without pulling the heatsinks off (not that its a big deal, I just won't be home until later)?
Click to expand...

if you run something like CPUID or similar, it should be able to spit out the S-SPEC for you without needing to take off the HSF.
 
here is the output from CPU-z on the processors:

Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium III EB
Codename Coppermine
Specification
Package Socket 370 FC-PGA (platform ID = 4h)
CPUID 6.8.A
Extended CPUID 6.8
Brand ID 2
Core Stepping cD0
Technology 0.18 um
Core Speed 996.7 MHz (7.5 x 132.9 MHz)
Stock frequency 1000 MHz
Instructions sets MMX, SSE
L1 Data cache 16 KBytes, 4-way set associative, 32-byte line size
L1 Instruction cache 16 KBytes, 4-way set associative, 32-byte line size
L2 cache 256 KBytes, 8-way set associative, 32-byte line size
FID/VID Control no
Features

Processor 2 (ID = 1)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium III EB
Codename Coppermine
Specification
Package Socket 370 FC-PGA (platform ID = 4h)
CPUID 6.8.A
Extended CPUID 6.8
Brand ID 2
Core Stepping cD0
Technology 0.18 um
Core Speed 996.7 MHz (7.5 x 132.9 MHz)
Stock frequency 1000 MHz
Instructions sets MMX, SSE
L1 Data cache 16 KBytes, 4-way set associative, 32-byte line size
L1 Instruction cache 16 KBytes, 4-way set associative, 32-byte line size
L2 cache 256 KBytes, 8-way set associative, 32-byte line size
FID/VID Control no
Features


SSpec isn't given but can be looked up via cD0 Stepping.
 
More PMs replied to. Would like to keep the server set together but will part if all the components are wanted separately
 
PMs replied to. I have had a few PMs to break the server up; I will do this as soon as the RAM/CPUs/Motherboard are all pending.
 
You must log in or register to reply here.
Back
Top