FS. Dual P3 Server. It needs to go!

anths

Limp Gawd
Joined
Jun 14, 2001
Messages
491
I have officially collected too many machines to keep around and need to get rid of my (previously used) onsite server.

EDIT: I will trade this setup for a high end/name brand external harddrive enclosure with IDE interface.

I used this running 2 virtual machines, one with OpenBSD for a router/firewall, one with FreeBSD for a file server.

Everything below for $35 + shipping

Pentium 3 server bundle consists of:
Tyan Thunder LE-T (S2518UGN) Motherboard featuring:
- Dual PGA370 ZIF sockets
- Supports up to two Intel Pentium III Processors or Pentium III Processors with 512kB Cache (Including Tualatin Processors)​
- 4 angled PC100/133 ECC DIMM slots; 4GB max
- Integrated Adaptec AIC-7899W Dual-Channel U160 SCSI controller
- One 64-bit 66MHz (3.3-volt) PCI slot and one 64-bit 66MHz (5-volt) PCI slot.
- Integrated Dual Intel 82559 LAN 10/100 controllers​

Dual Pentium 3 1Ghz Socket 370 CPUs

Dual Alpha heatsinks with 60mm fans (NOTE: These are standard height and can not be used in a 1u case). The fans have had the power and ground wires detached from the motherboard connector in order to run them at 7v for nearly silent operation.

4 512MB ECC PC133 DIMMS; Can’t recall manufacturers off hand (I believe 1 set is Crucial and 1 set is Kingston); 2 sets of 512MB DIMM pairs, each pair has a different manufacturer. RAM never failed and passed memtest for 72 hours before the server was decommissioned.

References are found below.
 
Back
Top