FS/FT: Phase Change

L

LibertySyclone

[H]ard|Gawd
Joined
Apr 9, 2007
Messages
1,366
I need this gone

I have both the 1366 and the 775/AMD clams, it started life as a Vapo chill but has beeen upgraded as you can tell

$200+shipping or 250 shipped.

Trades (+cash to equal the value of $250)
1TB or bigger HDDs
DDR3 i7 Ram (1600 or 1866)
PSU 750+ modular would be awesome
LGA775 CPU (I am pretty open I just need one for an HTPC)

if you have something to offer LMK I may or may not want it.

Pics:

472585670_H38Xn-M.jpg


472585615_K99fb-M.jpg


472585631_Skrw6-M.jpg
 
Is there a case for it or is it just out in the open like the images above show?
 
Estemated temps per wattage load. Or if you know what it can or cant handle. Would it handle an i7 with HT at 1.8v? (400-450w load).

And would you have intrest in an Abit I-P35 Pro, Celeron 356, Pentium D 820, 600W OCZ modxstreme pro, 640gb AAKS HDD or D9GMH DDR2 ram? (any to all of the above plus cash)
 
It was built for my i7 load temps w/o HT were in the (negative) mid-low 20's it wont handle a 920 with HT on under full load 1.6-1.7v for longer than 20-30min. You would have to go to a rotary compressor to handle more than 400w

If I can get my hands on a load tester for it I will test it to get you a more accurate number.
 
Thats alright, Ill just keep toying with the AC chiller I have. Was hoping this would be noticeably better, but its about the same.
 
Interested in an Enermax EVO 850? Modular and brand new. How loud is it? Were you running your I7 920 24/7? Does it have a controller or is it just plug, wait 3 minutes and go? Also, what is the tallest part?
 
utnorris said:
Interested in an Enermax EVO 850? Modular and brand new. How loud is it? Were you running your I7 920 24/7? Does it have a controller or is it just plug, wait 3 minutes and go? Also, what is the tallest part?
Click to expand...

Is it the revolution? what is the exact part number.
 
Noise is all dependent on the fan(s) you use on it, the 120v one thats on it now is pretty loud but I ran it with a couple high pressure Noctuas and it was fine. the compressor is VERY quite. I was really suprised on how quite it was as a comparison I couldnt hear it over my GTX 285s with 70% fan.

No controller, just plug wait maybe 30-40 sec and go.

Tallest part is the compressor, I can get measurements tonite if you need them.

I would trade the PSU and split shipping.

PM me :)
 
You must log in or register to reply here.
Back
Top