FT: Your DDR2 for my D-Link/P3/Motherboard

brom42

2[H]4U
Joined
Mar 1, 2004
Messages
3,980
First what I need:

  • 2x1gb DDR2-800 matched set. This is going into a server. Latencies and brand don't matter but 100% stability is a must!!
  • Intel P4 motherboard. Needs to only be able to run a 2ghz s478 chip. (2.0/512/400/1.525) DDR or SDR OK, no RDRAM. Must be an Intel Chipset. On-board Video/Snd/LAN prefered, but not a must.

What I have to trade:

  • D-Link DGS-1008D 8 port Gigabit switch Ver. B1 Pic
  • D-Link DGS-1008D 8 port Gigabit switch Ver. C1 Pic
  • D-Link DI-LB604 Load Balancing Router. Pic This has dual WAN ports. Can do both load balancing and fail over.
  • D-Link DI-524 Wireless Router Pic
  • D-Link DWL-900AP+ Wireless Access Point Pic This can be used with other D-Link products as a bridge or range extender
  • D-Link DSS-8+ 10/100 Switch Pic
  • 2 x PIII-S 1.13GHz Set Both came out of the same server. 1133/512/133/1.45 SL5PU MALAY Pic
  • 2 x Intel mATX motherboard (815EP Chipset) with a 1.4GHz Celeron. Both have dead onboard ethernet ports, but everything else works. I use one of these for my IPCop box. Runs perfectly. Specs Pic1 Pic2

Details

These are items are all for trade. Don't make offers if you don't intend on at least making a partial trade.

I don't have any heat, but I have plenty of ebay feedback. If any money is exchanged, I can only pay using PayPal. I can receive money through PayPal or USPS money order. I can ship any method you want. If you are an established member of the forum (not a n00bie and I have heard of you) I will ship first/cross ship. Local Pickup available in the Twin Cities.
 
Back
Top