![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
see my rig in my sig.
the Chaintech has been a great board but it has one little flaw. The 300 fsb causes the MB to go into 1600 mhz safe mode every boot up unless I go into and back out of the BIOS beforehand. I dont even have to save the BIOS values, I just have to go into it and go back out. Once i do this, the 2.4 gig speed is fine, but the value on the screen reads something freakish like 360 Mhz CPU speed.
It does not do this at FSB values of 250 or less. It just boots at the OC'ed speed with no issues.
Is there any way get around this, or are there any hacked BIOS's for the Chaintech VNF3-250 that allow this?
the Chaintech has been a great board but it has one little flaw. The 300 fsb causes the MB to go into 1600 mhz safe mode every boot up unless I go into and back out of the BIOS beforehand. I dont even have to save the BIOS values, I just have to go into it and go back out. Once i do this, the 2.4 gig speed is fine, but the value on the screen reads something freakish like 360 Mhz CPU speed.
It does not do this at FSB values of 250 or less. It just boots at the OC'ed speed with no issues.
Is there any way get around this, or are there any hacked BIOS's for the Chaintech VNF3-250 that allow this?