Intel SRT not working properly

[V3|!UM]

Hey guys I am having trouble getting SRT working with my new office rig.

I have the following hardware:
Intel 2600k
Asrock Z68 Extreme 4
8GB ripjaws cas8
2TB Seagate Barracuda XT HD
OCZ vertex 2 60GB SSD
Gigabyte OC GTX 580

The SATA is set to Raid in the Bios. I installed all of the software drivers and get to SRT. I hit accelerate and it asks which drive I want to accelrate. I choose the 2TB Seagate Barracuda XT and hit OK, after that nothing happens. I can still select to find a drive for acceleration. What am I missing?

Currently running 1.40 Bios, Intel rapid response 10.5.0.1026, Intel management engine components 7.0.0.1144

Update:
So when i was trying to accelerate my 2 TB Seagate it was showing as 1.8TB in the SRT. Well, I did a drive shrink on the HD by half. So i had 2 x 900GB partitions. I then tried to accelerate and voila. is there a 1TB limit, if not what is going on then? Also, i realized i could not format the secondary partition while accelerated. I had to disable acceleration and then format. Is this a bug or did I miss the 1TB HD limit?

 

[V3|!UM]

anybody out there?

 

[V3|!UM]

double post

 

[Haiku214]

Is that your office rig? I wonder what kind of job you have.

 

[V3|!UM]

I indulged a bit, I am the CIO of my company..

 

[Triage]

http://www.anandtech.com/show/4329/intel-z68-chipset-smart-response-technology-ssd-caching-review/2

Gives a step by step setup guide at the start. It looks like you select the disk to accelerate followed by the disk to use as cache.

 

[V3|!UM]

I checked that out before, it gave nothing useful.