MSI K8N Neo4 Platinum Modded BIOS

R

RyanVM

Limp Gawd
Joined
Jun 4, 2004
Messages
334
I've made a modded v1.C BIOS for the K8N Neo4 Platinum. It changes:

NVPXE ROM version 212.0491 to version 215.0503
NVRAID BIOS version 4.84 to version 5.50
Si3114R5 RAID BIOS version 5.2.16 to version 5.3.14

I've tested this on my own Neo4 Platinum (posting from it right now :)), and it works perfectly. As always, feedback is welcome!

<link dead, see below>
 
I wouldn't mind using it, but how come can't I plug my hard drive to SATA ports 5-8 so it'd let me overclock higher (highest i can hit is 2.667ghz on SATA port 1.) Nothing works if I plugged my drive to SATA ports 5-8, even Windows Setup can't detect a hard drive there. Even though the Silicon thing right after POST sees it.
 
If you use the Si3114R5 controller, you have to load the drivers for it during Windows setup in order to access any drives plugged into it. At the very beginning, it prompts you to press F6 to load mass storage drivers from a disk. You need to do that.
 
Up to BIOS version 1.D. It changes:

NVPXE ROM version 212.0491 to version 215.0503
NVRAID BIOS version 4.84 to version 5.50
Si3114R5 RAID BIOS version 5.2.16 to version 5.3.14

I've tested this on my own Neo4 Platinum (posting from it right now :)), and it works perfectly. As always, feedback is welcome!

http://www.ryanvm.net/files/Neo4P_1D0.rar (364KB)
 
RyanVM said:
Up to BIOS version 1.D. It changes:

NVPXE ROM version 212.0491 to version 215.0503
NVRAID BIOS version 4.84 to version 5.50
Si3114R5 RAID BIOS version 5.2.16 to version 5.3.14

I've tested this on my own Neo4 Platinum (posting from it right now :)), and it works perfectly. As always, feedback is welcome!

http://www.ryanvm.net/files/Neo4P_1D0.rar (364KB)
Click to expand...

What does this change from 1.C? And how did you make them BTW?

PS: Love your grouped update packs.
 
You must log in or register to reply here.
Back
Top