![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
coolchu001
Limp Gawd
- Joined
- May 27, 2007
- Messages
- 506
After an hr of work my 8800gts g92 is now even cooler than before 
. The S1 was quite a pain to get it to align with the screw holes. The Yate loon fan is a D12SL which I spliced to a 4 pin graphics fan connector so I can use the on board fan plug. I also have a thermalright power regulator heat sink kit installed.
With my old AC Silencer NV 5 I was getting 74C as my max using the ATI Tool scan, now it barely hits 59C and today is over 85F outside! According to RivaTuner the ambient temp also dropped about 5C.
Here are some pictures:
. The S1 was quite a pain to get it to align with the screw holes. The Yate loon fan is a D12SL which I spliced to a 4 pin graphics fan connector so I can use the on board fan plug. I also have a thermalright power regulator heat sink kit installed.With my old AC Silencer NV 5 I was getting 74C as my max using the ATI Tool scan, now it barely hits 59C and today is over 85F outside! According to RivaTuner the ambient temp also dropped about 5C.
Here are some pictures: