I thought I'd post some pics of my Single Board Computer system here. I originally was using it as Smoothwall Linux box to share/firewall dial-up, got a hardware router for DSL so, I retired the box for that use. Pretty much set idle until my main rig's power supply blew. I ended up using it with Mandrake 10.0 Community Beta 1, since Linux is fairly adaptable with switching hardware completely (Windows doesn't like *every* piece of hardware changed between boots very much) until I got all the parts in. Pretty much idle again, though I'm playing with it to figure out what type of RAM it wants (very picky).
C3 800@600 (due to ram not clocking to 133)
64MB RAM
Integrated i810 video and ethernet
HD attached to the top of the lid via the drives bottom holes. (2GB for Smoothwall, 10GB for emergency Linux)
Outside of box
Outside of box with CD for size reference
Box open, with CD rom attached for install of Smoothwall
On top of it is a 6 in 1 card reader, to the left is my 17" monitor, to the right is my mid tower, and slightly above the card reader is the speakers I use.
Side 1 - where the power card mounted to.
Bottom
Side 2 - flap covering the motherboard
C3 800@600 (due to ram not clocking to 133)
64MB RAM
Integrated i810 video and ethernet
HD attached to the top of the lid via the drives bottom holes. (2GB for Smoothwall, 10GB for emergency Linux)
Outside of box
Outside of box with CD for size reference
Box open, with CD rom attached for install of Smoothwall
On top of it is a 6 in 1 card reader, to the left is my 17" monitor, to the right is my mid tower, and slightly above the card reader is the speakers I use.
Side 1 - where the power card mounted to.
Bottom
Side 2 - flap covering the motherboard