mY sapphire 9800PRO mod 9800XT 128M 2.5ns Hynix

I

initial_f

n00b
Joined
Sep 29, 2004
Messages
25
for the tittle,i specially brought a Zalman ZM80D-HP and ZM-OP1 to lower the temperature.i use the 12v connecter for the ZM-OP1,but it is not very sactisfactory since it still goes high(50'C or so)when the system full-load lasting for about a half day.but i hvnt got to much acvtivity cooling in my case.just a TT7A for my Throton 2000+ oc 2.2G,and ZM- NB47J for northbridge heatsink,a 12 volt case fan for inhaling air in front of the case.
anybody tell me that is the ZM80D performing normal? cause i just took an hour for the ZM80D installation.
 
1027954-4fcqZIsoZm.JPG
 
That cooler isnt known for low temps as much as it's known for no noise.


If you wanted good temps, you should've gotten the VGA Silencer.

I have one of those on my Sapphire 9800 Pro (flashed to XT) and it runs wicked cool.
 
TheGamerZ said:
That cooler isnt known for low temps as much as it's known for no noise.


If you wanted good temps, you should've gotten the VGA Silencer.

I have one of those on my Sapphire 9800 Pro (flashed to XT) and it runs wicked cool.
Click to expand...

but i cant find any shops even online-shop sold the arctic VGA Silencer :(

it also might be more cheaper than the 80HD
 
now i reinstalled the 80hd,n changed the air flow of my case,blow the hot air form the viCard to the mb,then draw by the cpu-fan(max.6000rpm),at last draw it out of my case,now stabley keep the GPU temp under 60,the ENV temp keep under 37 after finished the 3dMark 05.
i think i'v make mistake with the extremities of the heatpipe :(
but it was rly rly hard to install properly :eek:
 
You must log in or register to reply here.
Back
Top