theMystery
n00b
- Joined
- Sep 18, 2016
- Messages
- 6
Hello everyone! After 2 years I post my second thread here, my english still not good LOL, 2 years ago I build my Ncase M1 with AIO CPU water cooling, (Here https://hardforum.com/threads/share...rix-gtx1070-o8g-gaming-graphics-card.1911725/ ) and I decide to upgrade my Ncase with full water cooling system, it’s hard, because my graphic card is ROG Strix 1070, it’s too high to set a full cover graphic card water block, but I still tried to make it, and I success!
I don’t upgrade my hadware, so still use Intel 6700K+ROG M8i+ROG Strix 1070. Here are my water cooling parts.
CPU water block: EK M8i monoblock
GPU water block: Customized bykski ROG Strix full cover water block
Reservoir & Pump: ICEMAN Cooler reservoir with P5 pump for Ncase
Radiators: EK Coolstream PE 240 38mm& XSPC TX120 20mm
Fans: 3xRaijintek Aeolus ß RW 120 13mm fans
Tubing: Bitspower 10/12mm PETG tube
Fittings: Barrow & Bykski fittings
Because ROG Strix 1070 is too high to fit normal full cover water block, I have to bought a customized water block from bykski like this (not mine):
There is a Tips! 2 years ago I use liquid metal(Coolabotory)to replace silicon grease between CPU core and top, get a good temprature, and I use liquid metal between the top and block too, few days ago when I take off the h100i’s block, I found it left some residue and very hard to clean it, then I used the metal polish to clean the top and get a “new 6700k” lol.
Also I replace old PSU silicon cable with new red silver plated cable, I highly recommend this cable route, very clean, good looking.
This is the reservoir and pump, it looks like FrozenQ reservoir for ncase, but it had a build-in pump with 3.5m pump lift. I set a red Barrow manual exhaust valve on the top of reservoir.
Here is the tubing route, it was my first time to build water cooling, I tried my best LOL. The route is reservoir—GPU—TX120–CPU—PE240, GPU block outlet is very close to TX120 inlet, I use a Barrow offcenter fitting to join them.
Here is the final pics
And I test the temprature, 33℃ CPU and 31℃ When stand by, 55℃ CPU and 52℃ GPU when full load. Good!
Thanks for watching with my desk!
I don’t upgrade my hadware, so still use Intel 6700K+ROG M8i+ROG Strix 1070. Here are my water cooling parts.
CPU water block: EK M8i monoblock
GPU water block: Customized bykski ROG Strix full cover water block
Reservoir & Pump: ICEMAN Cooler reservoir with P5 pump for Ncase
Radiators: EK Coolstream PE 240 38mm& XSPC TX120 20mm
Fans: 3xRaijintek Aeolus ß RW 120 13mm fans
Tubing: Bitspower 10/12mm PETG tube
Fittings: Barrow & Bykski fittings
Because ROG Strix 1070 is too high to fit normal full cover water block, I have to bought a customized water block from bykski like this (not mine):
There is a Tips! 2 years ago I use liquid metal(Coolabotory)to replace silicon grease between CPU core and top, get a good temprature, and I use liquid metal between the top and block too, few days ago when I take off the h100i’s block, I found it left some residue and very hard to clean it, then I used the metal polish to clean the top and get a “new 6700k” lol.
Also I replace old PSU silicon cable with new red silver plated cable, I highly recommend this cable route, very clean, good looking.
This is the reservoir and pump, it looks like FrozenQ reservoir for ncase, but it had a build-in pump with 3.5m pump lift. I set a red Barrow manual exhaust valve on the top of reservoir.
Here is the tubing route, it was my first time to build water cooling, I tried my best LOL. The route is reservoir—GPU—TX120–CPU—PE240, GPU block outlet is very close to TX120 inlet, I use a Barrow offcenter fitting to join them.
Here is the final pics
And I test the temprature, 33℃ CPU and 31℃ When stand by, 55℃ CPU and 52℃ GPU when full load. Good!
Thanks for watching with my desk!
Attachments
-
UtlL5KD_d.jpg39.1 KB · Views: 1,442
-
aiObTHs_d.jpg50.4 KB · Views: 1,081
-
ShqY1aJ_d.jpg43.8 KB · Views: 686
-
kmKdn3F_d.jpg70.6 KB · Views: 376
-
iZ0GZXs_d.jpg31.7 KB · Views: 359
-
Z8VY04O_d.jpg38.3 KB · Views: 355
-
6e899e49ly1fxfhobv6kpj20u01407wn.jpg292.1 KB · Views: 350
-
6e899e49ly1fxezy6uormj20u0140x6u.jpg266.6 KB · Views: 900
-
6e899e49ly1fxezyfr74tj20u0140npk.jpg390.8 KB · Views: 547
-
6e899e49ly1fxezyej8t6j20u0140x6w.jpg397.4 KB · Views: 398
-
6e899e49ly1fxezyepchfj21400u0npg.jpg226.7 KB · Views: 330
-
6e899e49ly1fxezyd438dj20u0140x6u.jpg229.6 KB · Views: 342
Last edited: