cutepuppy671
n00b
- Joined
- Dec 15, 2008
- Messages
- 10
I currently have a Nvidia GTS 250 (512MB memory)
with a stock speed of 756MHz gpu and 1100 for memory (by EVGA)
while gaming, the card will sometimes drop to the 2D clock speeds of 300MHz core, 100MHz memory
when this happens, theres nothing I can do to get it back to the 3d performance clock speeds, (forcing performance levels does not help and launching a game does not help)
the only way to fix this is to restart the PC (I have tried many different driver versions)
this problem happens on both stock speeds and overclocked speeds
I was thinking about editing the bios to my overclocked settings for both 3d and 2d
and using the voltage table editor to change the voltage from the stock 1.2V, to 1.22V
I was wondering if someone can look at the bios settings and tell me if these will work
here are the changes
for the memory timings, I did not make any changes
I uploaded the original unmodified bios to mediafire.com
http://www.mediafire.com/?qinnmtwyt13
if anyone doesn't like mediafire, I can upload it to any other file hosting place as requested
PS 1 other question, do I have to worry about the memory timings for the 2D mode and does the voltage for 2D mode differ from 3D mode?
so all in all, what I want to do is
1, stop the random down clock by giving both 3D and 2D modes the same clock speed and voltage
2, I want to do a slight voltage increase to ensure stability
with a stock speed of 756MHz gpu and 1100 for memory (by EVGA)
while gaming, the card will sometimes drop to the 2D clock speeds of 300MHz core, 100MHz memory
when this happens, theres nothing I can do to get it back to the 3d performance clock speeds, (forcing performance levels does not help and launching a game does not help)
the only way to fix this is to restart the PC (I have tried many different driver versions)
this problem happens on both stock speeds and overclocked speeds
I was thinking about editing the bios to my overclocked settings for both 3d and 2d
and using the voltage table editor to change the voltage from the stock 1.2V, to 1.22V
I was wondering if someone can look at the bios settings and tell me if these will work
here are the changes
for the memory timings, I did not make any changes
I uploaded the original unmodified bios to mediafire.com
http://www.mediafire.com/?qinnmtwyt13
if anyone doesn't like mediafire, I can upload it to any other file hosting place as requested
PS 1 other question, do I have to worry about the memory timings for the 2D mode and does the voltage for 2D mode differ from 3D mode?
so all in all, what I want to do is
1, stop the random down clock by giving both 3D and 2D modes the same clock speed and voltage
2, I want to do a slight voltage increase to ensure stability