Pictures Of Your Dually Rigs!

[Ockie0107]

Hmm also let me know on that RAID Card

 

[PuniPuni]

If you guys are REALLY interested... i can work something out between my brother and my roommates so my bro can get teh card...

that is if you guys are SERIOUS

 

[eighteen_psi]

If you guys are REALLY interested... i can work something out between my brother and my roommates so my bro can get teh card...

that is if you guys are SERIOUS

Oh I'm serious about wanting it....not so seriously able to pay ATM.
PM me if you'd like and LMK what you'd want for it and/or what you're looking for in trade and I'll let you know if its something I can do...if not, I'll conceed it to Ockie.

 

[doh]

http://www.thedoh.com/gallery/server-pics

Fairly OLD pics and the innards are different since there's a fifth hard disk in there as well as a PCI controller for it. http://www.thedoh.com/sysinfo for a few more details.

edit: and a bit more about it http://www.thedoh.com/~lisa/site/info/cpu/server

 

[Scorpionjwp]

Since my little problems in the past got bigger, I have to settle with switching parts out of the server chassis from a 4x P3 Xeon to a 4x P4 xeon.

Ahh, This arrived a few days ago, just a part so far, getting the rest soon.

A Cpu riser board with 4x socket 603 processors.

 

[Ockie0107]

Just a taste of my two duallies comming soon:

Specs are (approx): Some of the hardware is arriving now.

Tyan S2466 motherboard
AMD MP 2400+ (one is an MP2400 machine and the other is an MP1800 machine)
Copper CPU Coolers (LOUD)
4GB ATP ECC DDR PC2100 Memory
4 x 9.1GB 15K U320 SCSI Hard Drives
Raid 5
3Com Gigabit Copper NIC
52X CDRom
Vantec Alluminuim PSU

That should give you the basic idea

Pics:

Oh and my 1u server which is just finished:

DFI Matx motherboard
AMD XP1600
Skiving Copper 1U Blower heatsink
512MB PC3200 memory DDR
40GB WD 8MB 7200RPM Hard Drvie
1U Short depth case front mountable

Pics:

And progress on the rack:

Pics:

 

[Captboom]

post pics of duallys...this is the one i just finish that i have been talkin about for over a month...

gigabyte board, dual xp's clock at 17x140 for 2.38ghz, 1gb of pc2700 Reg ECC, 120GB WD 7200 8MB, Radeon 9200SE 128MB, onboard sound & lan...dual RBX blocks and dual 4" 24" evaporative towers with 120mm fans...

That's just FUGLY

 

[Scorpionjwp]

I have an suggestion about your dual computer with the dual external cooling units. Use Polyurithane glue on the tops of the units instead of duct tape, this glue will glue just about anything including pvc to pvc. And also paint the two units the same color as your case, something close to that blue color. Maybe trying to build up a metal enclosure for the two external cooling units and painting the enclosure blue also.
In my opinion, you rush through building up the 2 external cooling towers, put some more time working on these units.

I am not downing your Dual computer, but I am giving you some suggestions to go with.

 

[Great_Melinko]

Gatewat/TyanDual P3 600- Usually my server but its my main box until the motherboard for my main computer gets back from the egg.

And the latest edition is this power edge 2200 board. it has dual P2 266 512k EEC L2 cache.
Its currently waiting for someone to sell me a dell power supply. Also if you have any detailed info on these or similar boards please pm me. thanks

 

[zoom314]

Motherboard - MSI K8T Master2-FAR
Processors - 2x AMD Opteron 240
Memory - 1GB (2x 512MB) Corsair XMS Platinum Low Latency (Twin Pack) ECC Registered PC3200
Hard Drives - Western Digital Special Edition 120GB 7200rpm w/8MB buffer (WD1200JB) | Maxtor 40GB 7200rpm w/2MB buffer
Optical Drive - MSI DVD+R/+RW Drive
Graphics - ATI Radeon 9800Pro 128MB DDR
Sound - Avance Logic (Now Realtek) ALC201A (Onboard Audio)
LAN - Broadcom BCM5705 Gigabit LAN (Onboard LAN controller)
Operating System - Windows XP Professional SP1
Monitor - NEC 1860NX 18.1" LCD
PSU - Antec 550W "True550"
Case - Chieftec AX-01SLD Aluminum Workstation Tower

Nice motherboard, So are those the stock MSI P4 heatsinks? And how about a picture with this motherboard in the case?


Zoom3 Specs: (Proposed)

Chieftech Tower ATX Case
2-Opteron 244 1.8Ghz cpus
MSI K8T Master2-FAR motherboard
2-Thermalright SP-94(P4 type mounting on motherboard/will 2 fit possibly?) + 92mm Vantec Tornado Fans
Enermax 470 Watt Power Supply
OCZ 512MB PC3200LL 184pin DC(2x256Mb) ECC/Registered Ram
eVGA 5700 Ultra 128Mb agp card
1-WD 75GB ATA100 EIDE 7200rpm HDD(Taken from zoom1)
DVD+RW(Dual-Layer)/DVD-RW/CD-RW/CD-ROM drive
Microtek 18.1" LCD Monitor(Shared)
Microsoft IntelliMouse Optical 5-Button USB-PS/2 Mouse(Shared)
Logitech 104-Key USB Keyboard(Has Windows Keys onboard) w/an USB-PS/2 adapter(Shared)
OS: Windows XP Pro SP2 v.2180



Zoom1 Specs:

Chieftech DX-01BD Tower ATX Case
XP-M 2500+ cpu (2.0Ghz Mobile cpu @ 1.45vdc core)
DFI NFII Ultra Infinity A+ motherboard
Thermalright SP-97 + 92mm Vantec Tornado Fan(Neo-Backplate)
Enermax 470 Watt Power Supply
Purple Anodized Aluminum CPU SHIM
OCZ 512MB PC4200EL DDR533 184pin DC(2x256Mb) Ram
eVGA 5700 Ultra 128Mb agp card
2-WD hdds (40+75GB ATA100 EIDE 7200rpm HDDs)
NEC ND-1100A DVD+RW/CD-ROM drive
Microtek 18.1" LCD Monitor(Shared)
Microsoft IntelliMouse Optical 5-Button USB-PS/2 Mouse(Shared)
Logitech 104-Key USB Keyboard(Has Windows Keys onboard) w/an USB-PS/2 adapter(Shared)
OS: Windows XP Pro SP2 v.2180

Zoom2 Specs:

Cyrix 6x86 Desktop ATX Case (17"x17"x7")
XP-M 2600+ cpu (2.0Ghz Mobile cpu @ 1.45vdc)
DFI NFII LanParty Ultra rev.B motherboard
Thermalright SLK-947U + 92mm Vantec Tornado Fan(Neo-Backplate)
ANTEC 350 Watt Power Supply
THERMALTAKE COPPER CPU SHIM
Kingston 256MB PC3200 400 DDR 184 pin Ram(1-Dimm)
Visiontek Xtasy Ti4200 64Mb agp card
Maxtor 20 GB 20GB ata100 7200rpm HDD
56x Acer CD-ROM eide drive
Microtek 18.1" LCD Monitor(Shared)
Microsoft IntelliMouse Optical 5-Button USB-PS/2 Mouse(Shared)
Logitech 104-Key USB Keyboard(Has Windows Keys onboard) w/an USB-PS/2 adapter(Shared)
OS: Windows XP Pro SP2 v.2180
Oh and I have a Netgear RP614 router for DSL/NET access. And both work just fine.

 

[Tim_axe]

Great_Melinko - And the latest edition is this power edge 2200 board. it has dual P2 266 512k EEC L2 cache.

I'm pretty sure Dell still sells the stuff or at least has information on their older servers. I found plenty out about my PowerEdge 4300, although some of the information isn't exactly accurate.

Today I upped the amount of RAM in my PowerEdge 4300 by adding a 512MB stick (and it worked because the density was right, my 256MB stick didn't work), so I decided to take some pics. The room this thing is in is sort of cramped, but I managed to get a decent pic of the insides. This is my webserver, BTW.

Important Specs:

• Dual P3 - 450 w/ 512KB L2 Cache
• 768MB of RAM
• Two of Three Redundant PSUs
• Two 18GB 10K RPM SCSI Drives (Up to 8)

Shot of the inside:

Shot of SCSI Backplane through inside:

Just another shot of the insides:

I also have a Gigabyte GA-7DPXDW-P with two Athlon-M 35watt 2400+ Mobile processors running at 2.45GHz @ 1.75/1.85??? volts in a case I built myself (incomplete):

 

[Scorpionjwp]

They do have the parts for the Poweredge 2200, I already dug up info for this machine. The thing to note about getting the parts from Dell, you have to have a account set up in order for you buy parts from them, which really sucks. Just getting the information to him was hard enough, I had to go through 4 different departments, several phone option choices before I got the info.

And the sad thing, they asked me for a serial number for a computer. I did Great_Melinko a favor and called Dell asking if they sold parts and a number for the powersupply. Yes Dell asked me for a number for the Poweredge, which I replied back that I was building it from the ground up. They after 5 minutes of trying to tell the person from India that I just needed some info, she finally gave up the serial number for the powersupply.

The second best places to look for parts are PC recycling places for Poweredge 2200 parts.

Hey Tim_axe, I see that your server need a dusting.

 

[Great_Melinko]

omfg, DUST THAT!!!!

Thanks everyone for helping me find parts. i took the psu out of the 'family' (family until it crashes ) dell and it worked so im thinking if i can find a 250-300w dell psu it will work.

 

[AMDXP]

Tim Axe Clean The Dust!

 

[Scorpionjwp]

Can you say revenge of the Dust Bunnies? Please do us all a favor, clean the case out with something, can of air, pressure washer, air compressor, or blow it out.

Hey Tim_Axe, if we all have to come to your house to clean it out, we will charge you for time we spent cleaning it out.

 

[Tim_axe]

Well...it's been running fairly continiously since Japan all the way to Idaho...

I guess I'll have to work on cleaning it soon, but with all of the house work (structural, among other things) going on, doing the cleaning right now would not last very long.

I think the dust bunnies are going into a rabid hungry state right now, though. They managed to disconnect my SCSI HDDs a while back...so they'll have to be controlled before long...

 

[chrisf6969]

Dual AMD XP 2500+ @ 2200Mhz
512 DDR
GIGABYTE GA-7DPXDW-P
WD 80GB HDD
GF2 MX
2 x Maze 4
Hydor L30
DTek Pro Rad

A little disappointing to see a powerhouse like that with a GF2MX in it. I know dual systems are not necessarily for gaming, mostly for number crunching, compiling, seti, etc.... but a GF2 MX!!! not even a GF2 GTS!!

 

[z1erer]

2x Intel Xeon 2.4/512/533 @ 3.4GHz
ASUS PC-DL 1.05 (i875P)
2x 512MB PC3200 TwinMOS / BH-5 @ 2-2-2-5
Hercules 9800 128MB (PRO Bios)
2x 80GB Hitachi SATA @ Raid0

.....watercooled

-----------------------
my server board:

MSI K7D Master-L

2x AMD Athlon XP @ MP 1333MHz
2x 512MB RAM

 

[insanarchist]

Huzzah for high-end 3d-graphics companies upgrading & giving out their old "top of the line" workstations for free!

2 x PIII 1Ghz
1.5 GB PC800 RDRAM
2 x 36.7 GB Atlas' in RAID1 (Storage Drive)
2 x 18.7 GB Cheetah's in RAID1 (OS Drive, did RAID0 before I researched it and am now too
lazy to change it...)
GeForce2 Ultra (I had it lying around)

I'm using it for a Work machine right now (Programming , Web Design , Photoshop , Other misc tasks)

 

[rebelkin]

hehe about time i should start posting.
pics are here: http://misha-su.kicks-ass.org/00Pic/index.php?album=Comp&dispsize=1024&start=0

there arent pics of my desktops actual goods.. but here are the specs
dual XP2500 -> 2261mhz
1gb crucial ram
msi k7d-l
matrox parhelia
2x mitsubishi 18" nx86lcd
1x sony g500
3ware 7500-8
3x WD 250SE raid5
scsi dvd/cdrw
water cooled

the other one is more fun:
dual xeon 500 512K cache
768 ram
junky supermicro mobo that gets 5 minute time difference every hour
3ware 7810
7x 200gb raid5 (WD 8mb cache)
full 100 mbit inet conx

i also have a dell poweredge 4x00 (cant remember.. in japan atm)
4x xeon 500mhz 1mb cache
2gb ram
adaptec aac-364 scsi raid quad channel 128 cache 72hour battery backup
5x 18gb
sitting in my room collecting dust

and since we are in the server dept, i also have a adaptec 3200s quad channel 128 cache u160 raid controller collecting dust =p

What kind of monitors are those?

 

[devourment77]

dual p4 xeon 2.67 ghz OCed to 3.4 ghz
gentoo linux

 

[Frosty_axe]

Dual 246, 2gb pc3200 and some other goodies

Where it lives, its the first 4U box from the top, followed by a 1200mhz duron adn a dual PIII 733. The rack is very nice for the dorm room, it doubles as a space heater, a table for my 2nd moniter and makes it very convienent to move around. (assumeing you can move it)

 

[Anarchy]

cl1ck MeH !!!!!!!!!11111oneoneone

... and i've got 80% of the Watercoolin parts already here

 

[z1erer]

Arthur du spinn0r
--------

My Server:

MSI K7D Master-L
2x Athlon XP (T-Bred) @ 1500+
2x512MB PC2700

 

[Plextor]

Dual P4 Xeon 2.4 GHz

AND

Dual P3 Xeon 550 MHz (Dell Power Edge 6300)

more pics

 

[Anarchy]

Click the Link

http://hardwareluxx.de/mzierer/bilder.php?dir_files=supermicro



it's 6.5 MB of Supermicro 1U Pics

The other 1U is empty and waitin till i can get a good board (dually PIII) @ eBay, the Dell 2500 is from eBay (was CHEAP) but there's nothing inside ... i think i'll implant my Watercooled Gaming rig inside

 

[morpheus777]

Nice motherboard, So are those the stock MSI P4 heatsinks? And how about a picture with this motherboard in the case?
[/size]

Those are the HSF that MSI bundled with the motherboard.

Here are a few pics right after I built it (and before I added the second hard drive). And yes, I know the wiring isn't too great.

Pic 1
Pic 2
Pic 3

 

[bmh.01]

2x P3 800EB
Asus CUR-DLS
384mb Crucial PC133 CAS3 EEC SDRAM
Rest in sig, nothing special but its my first dually, got most of the parts off ebay.

 

[z1erer]

 

[ThelvynD]

1Ghz PIIIs

1.6Ghz LV Xeons

 

[KORI]

in my new case

 

[weasel2htm]

I took a couple pictures of mine tonight though it is crap compared to anything else shown and I will warn you that the picture quality is poor and there is DUST!!! But I'm not gonna get them uploaded tonight, when I get my room of doom page updated and given a partial re-vamp annndd upload it to it's new (crappy) hope on tripod.

I will give you the specs now.

Micron Motherboard with Dual PII 266 with 16 MB RAM(PC66) $30-Ebay
ATA 100 Card $20 Used-friend
IBM EtherJet 10/100 $10 or $15 Used Local Computer Shop
1MB S3 trio PCI Video - Spare (Bought new for $50 several years ago when I built my P-166)
Seagate 4GB IDE HD (System Drive) Free from friend for helping him Move
WD 3GB IDE HD Pulled from a P-120 I bought at an auction for a $1
3.5 floppy Bad, needs replaced
30GB Maxtor HD ATA133 (Runs off of ATA 100 card) $30 after rebate at staples
40GB Maxtor HD ATA133 (Runs off of ATA 100 card) Free, Given to me as a Thank you from my old boss.
Creative Quad Speed CD-ROM Traded ...er long story $5 or $10
L&C 350 watt Power Supply $20
Big Full tower case Trade with friend ~$35 invested
Assorted cooling fans FREE, Pulled from Dead Power Supplies, etc...
2 sticks of 128 MB
1 stick (PC100) came in a used compaq I bought from a friend for $200
the other stick (PC133) I traded a Socket A Heatsink for ..could be a long story.


It Runs 2000 Server, The entire 30GB is Mirrored with 30 of the 40 in a Software RAID.
I use it primarly as a file server.
It also runs AVG anti-virus

It's been a good unit, if it died tomorrow I'd feel like I got my use out of it, it's slow but does what I need.

 

[Great_Melinko]

I took a couple pictures of mine tonight though it is crap compared to anything else shown and I will warn you that the picture quality is poor and there is DUST!!! But I'm not gonna get them uploaded tonight, when I get my room of doom page updated and given a partial re-vamp annndd upload it to it's new (crappy) hope on tripod.

I will give you the specs now.

Micron Motherboard with Dual PII 266 with 16 MB RAM(PC66) $30-Ebay
ATA 100 Card $20 Used-friend
IBM EtherJet 10/100 $10 or $15 Used Local Computer Shop
1MB S3 trio PCI Video - Spare (Bought new for $50 several years ago when I built my P-166)
Seagate 4GB IDE HD (System Drive) Free from friend for helping him Move
WD 3GB IDE HD Pulled from a P-120 I bought at an auction for a $1
3.5 floppy Bad, needs replaced
30GB Maxtor HD ATA133 (Runs off of ATA 100 card) $30 after rebate at staples
40GB Maxtor HD ATA133 (Runs off of ATA 100 card) Free, Given to me as a Thank you from my old boss.
Creative Quad Speed CD-ROM Traded ...er long story $5 or $10
L&C 350 watt Power Supply $20
Big Full tower case Trade with friend ~$35 invested
Assorted cooling fans FREE, Pulled from Dead Power Supplies, etc...
2 sticks of 128 MB
1 stick (PC100) came in a used compaq I bought from a friend for $200
the other stick (PC133) I traded a Socket A Heatsink for ..could be a long story.


It Runs 2000 Server, The entire 30GB is Mirrored with 30 of the 40 in a Software RAID.
I use it primarly as a file server.
It also runs AVG anti-virus

It's been a good unit, if it died tomorrow I'd feel like I got my use out of it, it's slow but does what I need.

dont use tripod to host pics for here. it will last 30seconds at best

 

[Santos L. Halper]

Work rig. Specs are in my sig.

 

[runt]

i have 2 dually systems, one old tyan socket 7 board with 2x pentium 233mmxs in it (file server, soon to be turned into a router), and an abit bp6 with 2 celeron 366s in it (waiting on new heatsinks to run them at 550+). i want a dual amd system but can't afford one right now.

 

[cybertron]

Click the Link

http://hardwareluxx.de/mzierer/bilder.php?dir_files=supermicro



it's 6.5 MB of Supermicro 1U Pics

The other 1U is empty and waitin till i can get a good board (dually PIII) @ eBay, the Dell 2500 is from eBay (was CHEAP) but there's nothing inside ... i think i'll implant my Watercooled Gaming rig inside

that case is a beauty!

 

[Great_Melinko]

Work rig. Specs are in my sig.

http://images.dr3vil.com/uploads/work_1.jpg/IMG]
[IMG]http://images.dr3vil.com/uploads/work_2.jpg[IMG]
[IMG]http://images.dr3vil.com/uploads/work_3.jpg/IMG][/QUOTE]


:drool: can i sex0r your computer? :eek:

 

[vapb400]

Arthur du spinn0r
--------

My Server:

MSI K7D Master-L
2x Athlon XP (T-Bred) @ 1500+
2x512MB PC2700

anybody know what case that is? looks kinda like a lianli but i can't tell, looks amazing for my upcoming WC project

 

[Great_Melinko]

antec?

 

[vapb400]

antec?

it has that mesh grill upfront though