M
MantisIT
Guest
---
Last edited by a moderator:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Do it yourself 2.1 Powered Speakers through soundcard.
What you need are the following cables:
(1) 3.5mm to RCA cable: http://www.monoprice.com/products/p...d=10218&cs_id=1021804&p_id=666&seq=1&format=2
(3) RCA Y-splitters: http://www.monoprice.com/products/p...d=10218&cs_id=1021803&p_id=663&seq=1&format=2
(2) RCA cables
Instructions are as follows:
1. Connect the 3.5mm to RCA cable to your soundcard's main speaker out.
2. Connect one RCA Y-splitter to each end of the cable from step 1.
3. RCA cable. Plug both white plugs step 2 into this. Plug the other end into your AV-40's.
4. RCA cable. Plus both red plugs from step 2 into this. Proceed to step 5.
5. RCA y-splitter. Use the last RCA y-splitter to connect the rca cable from step 4 to your subwoofer. This step is necessary because you don't have L/R rca inputs on your sub. The single end goes into the subwoofer.
A few additional comments:
If your subwoofer has RCA inputs, step 5 is unnecessary.
If your speakers have subwoofer out, you just run a 3.5mm to RCA cable to the Monitors and then an RCA cable to the subwoofer.
If your subwoofer has an RCA speaker out, run a 3.5mm to RCA cable to the subwoofer, and then an RCA cable from the subwoofer to the Monitors.